TechniSat HD S2X manual Multi-tenna, Switching DiSEqC on and off

Page 22

prematurely terminated, the satellite positions ASTRA and EUTELSAT will be pre- programmed. If you also wish to receive other satellites, or if you are using a different LNB, set your digital receiver to the desired data as follows:

>Use the Menu key to call up the Main menu.

>Use the arrow keys up/down to mark the line Settings.

>Confirm by pressing OK.

The menu Settings will be displayed.

>Now use the arrow keys up/down to mark the line Antenna settings (DVB-S).

>Confirm by pressing OK.

The menu Antenna settings will be displayed (DVB-S).

The following settings can be made in this sub-menu:

6.5.1 Multi-tenna

If the receiver is operated on a multi-tenna-LNB then under this menu point you could automatically adjust the switch positions on the multi-tenna-LNB.

>Use the OK key to automatically adjust the switch positions.

6

6.5.2 Switching DiSEqC on and off

DiSEqC (Digital Satellite Equipment Control) is a digital switching/controlling signal used to control DiSEqC-compatible components via the antenna cable. If your external unit is equipped with DiSEqC components, you must switch the DiSEqC controlling function:

>In this line, use the arrow keys left/right to switch DiSEqC on or off.

As only one LNB can be controlled when the DiSEqC function is switched off, the menu is limited to the configuration of a single LNB

6.5.3 Antenna signals

Your receiver is equipped with two tuners. This allows you to record one programme while viewing another programme. So that you can enjoy the full benefit of the functions of your twin receiver for both recording and playback, you should definitely use two separate antenna connections (antenna signals). Please also note Point 8.1.

>In this line, use the arrow keys left/right to set the number of antenna signals to 2, if you are connecting your receiver to two separate antenna connections. If only one antenna connection is available, then set this item to 1.

To utilise all the recording facilities of your receiver, you should ensure it is connected via two independent antenna connections. This allows you to use the following combinations of recording and playback:

-Recording a programme and simultaneously watching another programme

(1 programme in HD format and 1 programme in SD format or 2 programmes in SD format) or call up any recording on the hard drive.

-Simultaneously record two programmes (1 programme in HD format and

1 programme in SD format or 2 programmes in SD format) even if these are received in differing reception fields.

-Simultaneously receive two different programmes (even differing fields of reception; 1 programme in HD format and 1 programme in SD format or 2 programmes in

SD format) and at the same time show a previously recorded programme.

If only one antenna connection is available for connection to the receiver, only a limited range of recording and playback options is available.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents DigiCorder HD S2X P V R DiSEqCContents Operation Hard drive operationChanging basic programming Remote control IllustrationsFront of unit Back of unitUse with a rotating antenna DiSEqC Dear customer Disposal advice Please read this firstSafety notes Important notes on operation When not in useImportant note on data security Connecting the DVB receiver VCRExternal unit Mains power connectionConnection to a television set Serial interface RS Video cassette recorder VCRHiFi/Surround Sound amplifier USB-BuchseAntenna signals Initial installationCountry setting Operating languageProgramme/channel search/ISIPRO Antenna configurationSoftware updating ContinueEnding the installation assistant Loading EPGplus dataOperating language SettingsBasic settings CountryPicture settings TV Scart mode Sound settingsHdmi resolution Use the up/down arrow keys to mark the line Sound SettingsSub-title language Antenna settingsAudio speech Dolby DigitalSwitching DiSEqC on and off Multi-tennaSetting the switching matrix Press the OK key. Example 1 2 satellites Twin-LNBsLNB Type Additional settings/LNB propertiesSystem examples Test-TransponderRotating antenna Special functionsSeveral Favourites lists CI dual decoding Network settingsDisplay time Information Banner Radio background picturePage Operation Switching on and offProgramme selection Calling up blocked programmes Receiving encrypted programmesInfobox Selecting a starting time Special functionsOption channels Simultaneous reception of two encrypted programmesTV/Radio switching Volume controlSelecting a different language Additional programme information Return to last programme previously selectedDisplay clock and programme information Transponder informationVideotext PIP function picture in picture SubtitlesCall up PIP operation EPGplus Electronic Programme Guide Switch off PIP operationZoom picture Change PIP picturesDownloading EPGplus data Interrupting the download procedureNow Table with current programme contents Calling up the Electronic Programme GuideEPGplus functions NextMore EPGplus InfoTimer settings pre- and post-run time EPGplus Timer programmingDeleting the EPGplus timer event Use the up/down arrow keys to select the line Delete timerDisplaying the EPGplus overview for other channels Use the arrow keys up/down to mark the line Timer settingsEPGplus programme overview EPGplus overview by type of programme genreSleep Timer Ending EPGplus modeRecording Timer-controlled recordingHard drive operation Instant recordingEnding a recording manually Instant recording Starting a recording manually OptionEnd recording automatically Option Timer recordings Manual programming of timer Delete Timer programming Timer overviewChanging Timer programming Programming a new Timer eventTimeshift function TimePlaying back recordings Reproducing hard drive recordings Setting markers while recordingPlayback function Recording informationJogshuttle function Pause/Freeze frameFast forward and rewind Slow motionJumping to markers Setting markersCreate Picture End playback sessionSkipping titles Switching folder levelsOn-screen controls Pause2.3 MP3 playback modes Language select keyTo display playlist Playlist To draw up a play listFunction Display Screen Viewing pictures To delete titles from the playlistTo delete a playlist Replay Lists with the up/down arrow keysSlide show Show next/previous pictureRotate picture Playlist To draw up a playlistHow to delete pictures from the playlist Replay listsDelete Managing the hard driveManaging recordings Parental controlFunctions Setting a markerGoing to any spot of the recording Deleting a markerExtracting a section Deleting a sectionLine rename mark Splitting a recording Renaming a recordingManaging music/pictures Enlarging a videoReduce video Moving CopyingMarking blocks CopyExporting Sampling MP3 files/showing picture filesCopying recordings Use the arrow keys up/down to mark the line Copy recordingsHard drive information PreviewPreview Checking the hard drive Hard drive maintenanceFormatting the hard drive Calling up the programme list manager Configuring the Favourites listChanging the basic programming Select a Favourites listAdding programmes to the Favourites list Deleting from the Total list Sorting programmesUpdating time Programming the electronic programme guideUpdating Start categoryEPG channel Selecting TV channels/programmesParental control Start updatePIN query mode Selecting radio channels/programmesProgramme search/scan Automatic scan Satellite scanTransponder scan Use the arrow keys up/down to mark the line Search modeUse the arrow keys up/down to mark the line Symbol rate SatelliteDuring the search Manual searchAfter the search Delete all programmes Service settingsActivate factory default setting BackIsipro channel Update programme list automaticallyUpdating the programme list Isipro Start availability test manuallyDeleting programmes Update programme list manuallyAdapting programmes Adding a TV or radio programmeSoftware channel Updating softwareNew software available Encryption system System configurationCopying settings Manual initialisation of the CI-ModulesEast and West limits Setting the East limitUse with a rotating antenna DiSEqC Deleting existing limitsSetting the West limit Geo-positioningSetting a satellite position Setting a user-defined satellite position User satelliteAutomatic fine adjustment Autofocus Adjusting the satellite antennaTest transponder/LNB configuration Positioning antenna manuallyTurning to a satellite position Current satellite listSaving a satellite position ActionsDeleting a satellite position Reference positionCommon Interface Technical dataDBS-Tuner Card-readerInput analogue Audio decodingAudio parameters Output analogue Output digitalHDMI-output LNB power supplyTimer Mains jackPower supply Remote controlGeneral Troubleshooting guide Problem Possible cause SolutionProblem Possible cause Solution For everyday use

HD S2X specifications

The TechniSat HD S2X is a versatile satellite receiver designed for high-definition viewing. This compact device combines advanced technology and user-friendly features to deliver an exceptional entertainment experience. Offering unmatched image quality, the HD S2X supports 4K Ultra HD resolution, ensuring that every detail and color comes to life on your screen.

One of the standout features of the TechniSat HD S2X is its ability to receive various satellite signals. With support for DVB-S2 and DVB-S standards, it can easily tune into a wide range of channels and services without hassle. This versatility allows users to access both standard and high-definition programming, making it a great choice for those who want to explore diverse entertainment options.

Equipped with a powerful multi-core processor, the HD S2X ensures fast channel switching and smooth navigation through menus. Its intuitive user interface is designed to provide easy access to all features, including channel lists, settings, and viewing history. Additionally, the device comes with a user-friendly remote control, which allows for convenient operation from the comfort of your sofa.

The TechniSat HD S2X also features built-in Wi-Fi capability, enabling users to connect to the internet effortlessly. This connectivity allows for online streaming and access to various applications. Users can enjoy additional content beyond traditional satellite channels, including catch-up TV services and online video platforms.

Another remarkable aspect of the HD S2X is its support for multi-room functionality. This means you can connect multiple HDMI-enabled devices within your home and enjoy your favorite shows in different rooms without interruption. Furthermore, it supports recording capabilities, enabling users to save their favorite programs for later viewing directly onto an external hard drive.

The device also comes with an Integrated Conditional Access Module (CI+) slot, allowing for secure access to pay-TV services. Its compatibility with various media formats ensures that users can enjoy a wide range of video files, music, and photos.

In conclusion, the TechniSat HD S2X stands out in the satellite receiver market. With its full HD capabilities, easy-to-use interface, internet connectivity, and versatile recording options, it offers a comprehensive solution for all your entertainment needs. Whether you are a casual viewer or a dedicated enthusiast, the TechniSat HD S2X is an excellent investment for elevating your viewing experience.
Top Page Image Contents