-Record a programme and at the same time another programme from the same reception field (1 programme in HD format and 1 programme in SD format or 25 programmes in SD format) or show any programme from the hard drive.
-Simultaneously record two programmes from the same reception band
(15 programme in HD format and 1 programme in SD format or 2 programmes in SD5format).
-Simultaneously record two different programmes from the same reception band
(15 programme in HD format and 1 programme in SD format or 2 programmes in SD- format) and at the same time play a
6.5.4 Setting the switching matrix
The menu lists the four switching criteria for the DiSEqC control. You receiver is pre- programmed so that ASTRA is received on switch setting A/A and Eutelsat is received on setting B/A of a
>Use the arrow keys to select a DiSEqC switch position
>Press the OK key. Example 1: 2 satellites (Twin-LNBs)
A selection table listing various satellites will now be displayed.
>Use the arrow keys to mark the desired satellite.
Use the up/down arrow keys to move the marker up or down one line at a time, or use the left/right arrow keys to move the marker backward or forward one page at a time.
If the desired satellite is not included in the list, please use one of the reserve slots, marked User 1 to User 13.
>Confirm by pressing OK.
The marked satellite will now be added to the menu Antenna settings at the previously marked position
You can now adjust the settings in the menu Antenna settings, in this manner until the settings in this menu correspond to those of your receiving unit. For any switching criteria that you do not require, use the setting No satellite.
6
23