TechniSat HD S2X Use with a rotating antenna DiSEqC, East and West limits, Setting the East limit

Page 80

10

10 Use with a rotating antenna (DiSEqC 1.2)

Your digital receiver is ready for use with a motorised rotating antenna. Using the DiSEqC control (DiSEqC level 1.2) you have the facility to control a suitable motor via the co-axial cable.

>Call up the Antenna settings menu as described under Point 6.4 and switch the

DiSEqC control (Point 6.5.1) on.

>Now use the arrow keys up/down to select the DiSEqC position (e.g. A/B 3) to which you wish to allocate the motor antenna.

>Press the OK key to open a window allowing you to select the Satellite resp. the

Motor antenna.

>Use the arrow keys up/down to select the line Motor antenna and confirm by pressing OK.

>Confirm the note on setting the East and West limits with OK.

10.1 East and West limits

To avoid mechanical damage to the satellite dish or the LNB by physical obstacles, you must first set the maximum degree of rotation to both East and West. If there are any obstacles in the rotating field of the dish (e.g. a wall or chimney), these must definitely be considered when setting the East-West limits.

If there are no obstacles in the rotating range of the dish, set the limits so that the dish can be rotated a little further than the most extreme locations of the satellites to be received.

10.1.1 Deleting existing limits

First, you should delete any limits that may exist.

>Use the arrow keys left/right to mark the column Configuration.

>Now use the arrow keys up/down in the line Motor antenna to mark the field

Continue.

>Confirm by pressing OK.

The menu for setting the motor antenna will now be displayed.

>Press the blue function key Actions to open a selection window.

>Now use the arrow keys up/down to mark the line Delete limits.

>To delete the limits press the OK key.

>Confirm the message with OK.

10.1.2 Setting the East limit

>To enter the East limit, first use the arrow keys to mark the field Save.

>Now press the arrow key right to rotate the dish to the maximum East position possible, resp. desirable.

>To open the window listing the available actions, press the blue function key

Actions.

>Now use the arrow keys up/down to mark the line set East limit.

>To set the east limit press the OK key and confirm the following remark with OK.

80

Page 79 Page 81
Image 80
Page 79 Page 81
Contents DigiCorder HD S2X P V R DiSEqCContents Operation Hard drive operationChanging basic programming Remote control IllustrationsFront of unit Back of unitUse with a rotating antenna DiSEqC Dear customer Disposal advice Please read this firstSafety notes Important note on data security When not in useImportant notes on operation Connecting the DVB receiver VCRConnection to a television set Mains power connectionExternal unit Video cassette recorder VCR HiFi/Surround Sound amplifierSerial interface RS USB-BuchseInitial installation Country settingAntenna signals Operating languageAntenna configuration Software updatingProgramme/channel search/ISIPRO ContinueEnding the installation assistant Loading EPGplus dataSettings Basic settingsOperating language CountryPicture settings Sound settings Hdmi resolutionTV Scart mode Use the up/down arrow keys to mark the line Sound SettingsAntenna settings Audio speechSub-title language Dolby DigitalSwitching DiSEqC on and off Multi-tennaSetting the switching matrix Press the OK key. Example 1 2 satellites Twin-LNBsAdditional settings/LNB properties System examplesLNB Type Test-TransponderSeveral Favourites lists Special functionsRotating antenna Network settings Display time Information BannerCI dual decoding Radio background picturePage Programme selection Switching on and offOperation Infobox Receiving encrypted programmesCalling up blocked programmes Special functions Option channelsSelecting a starting time Simultaneous reception of two encrypted programmesSelecting a different language Volume controlTV/Radio switching Return to last programme previously selected Display clock and programme informationAdditional programme information Transponder informationVideotext Call up PIP operation SubtitlesPIP function picture in picture Switch off PIP operation Zoom pictureEPGplus Electronic Programme Guide Change PIP picturesInterrupting the download procedure Now Table with current programme contentsDownloading EPGplus data Calling up the Electronic Programme GuideNext MoreEPGplus functions EPGplus InfoEPGplus Timer programming Deleting the EPGplus timer eventTimer settings pre- and post-run time Use the up/down arrow keys to select the line Delete timerUse the arrow keys up/down to mark the line Timer settings EPGplus programme overviewDisplaying the EPGplus overview for other channels EPGplus overview by type of programme genreSleep Timer Ending EPGplus modeTimer-controlled recording Hard drive operationRecording Instant recordingEnd recording automatically Option Instant recording Starting a recording manually OptionEnding a recording manually Timer recordings Manual programming of timer Timer overview Changing Timer programmingDelete Timer programming Programming a new Timer eventTimeshift function TimeSetting markers while recording Playback functionPlaying back recordings Reproducing hard drive recordings Recording informationPause/Freeze frame Fast forward and rewindJogshuttle function Slow motionSetting markers Create PictureJumping to markers End playback sessionSwitching folder levels On-screen controlsSkipping titles Pause2.3 MP3 playback modes Language select keyFunction Display Screen Playlist To draw up a play listTo display playlist To delete titles from the playlist To delete a playlistViewing pictures Replay Lists with the up/down arrow keysShow next/previous picture Rotate pictureSlide show Playlist To draw up a playlistHow to delete pictures from the playlist Replay listsManaging the hard drive Managing recordingsDelete Parental controlSetting a marker Going to any spot of the recordingFunctions Deleting a markerLine rename mark Deleting a sectionExtracting a section Splitting a recording Renaming a recordingReduce video Enlarging a videoManaging music/pictures Copying Marking blocksMoving CopySampling MP3 files/showing picture files Copying recordingsExporting Use the arrow keys up/down to mark the line Copy recordingsPreview PreviewHard drive information Formatting the hard drive Hard drive maintenanceChecking the hard drive Configuring the Favourites list Changing the basic programmingCalling up the programme list manager Select a Favourites listAdding programmes to the Favourites list Deleting from the Total list Sorting programmesProgramming the electronic programme guide UpdatingUpdating time Start categoryEPG channel Selecting TV channels/programmesStart update PIN query modeParental control Selecting radio channels/programmesProgramme search/scan Automatic scan Satellite scanUse the arrow keys up/down to mark the line Search mode Use the arrow keys up/down to mark the line Symbol rateTransponder scan SatelliteAfter the search Manual searchDuring the search Service settings Activate factory default settingDelete all programmes BackUpdate programme list automatically Updating the programme list IsiproIsipro channel Start availability test manuallyUpdate programme list manually Adapting programmesDeleting programmes Adding a TV or radio programmeNew software available Updating softwareSoftware channel System configuration Copying settingsEncryption system Manual initialisation of the CI-ModulesSetting the East limit Use with a rotating antenna DiSEqCEast and West limits Deleting existing limitsSetting the West limit Geo-positioningSetting a satellite position Setting a user-defined satellite position User satelliteAdjusting the satellite antenna Test transponder/LNB configurationAutomatic fine adjustment Autofocus Positioning antenna manuallyCurrent satellite list Saving a satellite positionTurning to a satellite position ActionsDeleting a satellite position Reference positionTechnical data DBS-TunerCommon Interface Card-readerAudio decoding Audio parameters Output analogueInput analogue Output digitalLNB power supply TimerHDMI-output Mains jackGeneral Remote controlPower supply Troubleshooting guide Problem Possible cause SolutionProblem Possible cause Solution For everyday use

HD S2X specifications

The TechniSat HD S2X is a versatile satellite receiver designed for high-definition viewing. This compact device combines advanced technology and user-friendly features to deliver an exceptional entertainment experience. Offering unmatched image quality, the HD S2X supports 4K Ultra HD resolution, ensuring that every detail and color comes to life on your screen.

One of the standout features of the TechniSat HD S2X is its ability to receive various satellite signals. With support for DVB-S2 and DVB-S standards, it can easily tune into a wide range of channels and services without hassle. This versatility allows users to access both standard and high-definition programming, making it a great choice for those who want to explore diverse entertainment options.

Equipped with a powerful multi-core processor, the HD S2X ensures fast channel switching and smooth navigation through menus. Its intuitive user interface is designed to provide easy access to all features, including channel lists, settings, and viewing history. Additionally, the device comes with a user-friendly remote control, which allows for convenient operation from the comfort of your sofa.

The TechniSat HD S2X also features built-in Wi-Fi capability, enabling users to connect to the internet effortlessly. This connectivity allows for online streaming and access to various applications. Users can enjoy additional content beyond traditional satellite channels, including catch-up TV services and online video platforms.

Another remarkable aspect of the HD S2X is its support for multi-room functionality. This means you can connect multiple HDMI-enabled devices within your home and enjoy your favorite shows in different rooms without interruption. Furthermore, it supports recording capabilities, enabling users to save their favorite programs for later viewing directly onto an external hard drive.

The device also comes with an Integrated Conditional Access Module (CI+) slot, allowing for secure access to pay-TV services. Its compatibility with various media formats ensures that users can enjoy a wide range of video files, music, and photos.

In conclusion, the TechniSat HD S2X stands out in the satellite receiver market. With its full HD capabilities, easy-to-use interface, internet connectivity, and versatile recording options, it offers a comprehensive solution for all your entertainment needs. Whether you are a casual viewer or a dedicated enthusiast, the TechniSat HD S2X is an excellent investment for elevating your viewing experience.
Top Page Image Contents