TechniSat HD S2X EPGplus programme overview, Displaying the EPGplus overview for other channels

Page 39

programme automatically from the EPGplus data. Both the starting and the ending time of the programme will be taken over correct to the nearest minute. However, it frequently happens that the selected programme starts a little earlier or a little later than scheduled. In this case the start or the end of the programme may be missing from the recording. To overcome this problem, you can enter a pre- or post-run time for the timer, in steps of one minute at a time. The timer will then start earlier and end later than given in the EPGplus data by the entered pre-run and post-run times.

>Press the red function key Timer to open a selection window.

>Use the arrow keys up/down to mark the line Timer settings.

>Confirm by pressing OK.

A menu will be displayed allowing you to enter the pre-and post-run times.

>Now use the arrow keys up/down to mark the line Timer pre-run time and Timer post-run time.

>Use the numeric keys to enter the desired pre- or post-run time in minutes.

>Press the green function key Accept to save the setting and return to the previous EPGplus table.

7.16.7.3 EPGplus programme overview

You can use the EPGplus programme overview to display a table with the whole day's listings for an individual channel. Proceed as follows:

>Press the EPG key.

If you have selected the start category Overview, see Point 9.2.3, the “Now” EPGplus table will appear.

>While the “Now” EPGplus table is displayed, press the green function key to switch directly to the channel listings.

or

>press the blue function key EPG Menu.

>In the selection window, use the arrow keys up/down to mark the line

Programmes.

>Confirm by pressing OK.

The day’s overview of the selected channel will now be displayed.

>You can use the arrow keys to move the marker to the desired programme or time.

The individual days of the week are displayed along the lower edge of the screen. If information is available for the following days, the appropriate fields will be marked.

>To display the programme content of a specific day, press the corresponding numeric key.

Displaying the EPGplus overview for other channels

>Press the yellow function key Programmes. A list of EPGplus programmes will be displayed.

>You can now proceed to mark the desired channel using the arrow keys.

>Press the OK key to display the EPG overview of the marked channel.

7.16.7.4 EPGplus overview by type of programme (genre)

7

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents DiSEqC DigiCorder HD S2X P V RContents Hard drive operation OperationChanging basic programming Illustrations Remote controlBack of unit Front of unitUse with a rotating antenna DiSEqC Dear customer Please read this first Disposal adviceSafety notes When not in use Important notes on operationImportant note on data security VCR Connecting the DVB receiverMains power connection External unitConnection to a television set USB-Buchse Video cassette recorder VCRHiFi/Surround Sound amplifier Serial interface RSOperating language Initial installationCountry setting Antenna signalsContinue Antenna configurationSoftware updating Programme/channel search/ISIPROLoading EPGplus data Ending the installation assistantCountry SettingsBasic settings Operating languagePicture settings Use the up/down arrow keys to mark the line Sound Settings Sound settingsHdmi resolution TV Scart modeDolby Digital Antenna settingsAudio speech Sub-title languageMulti-tenna Switching DiSEqC on and offPress the OK key. Example 1 2 satellites Twin-LNBs Setting the switching matrixTest-Transponder Additional settings/LNB propertiesSystem examples LNB TypeSpecial functions Rotating antennaSeveral Favourites lists Radio background picture Network settingsDisplay time Information Banner CI dual decodingPage Switching on and off OperationProgramme selection Receiving encrypted programmes Calling up blocked programmesInfobox Simultaneous reception of two encrypted programmes Special functionsOption channels Selecting a starting timeVolume control TV/Radio switchingSelecting a different language Transponder information Return to last programme previously selectedDisplay clock and programme information Additional programme informationVideotext Subtitles PIP function picture in pictureCall up PIP operation Change PIP pictures Switch off PIP operationZoom picture EPGplus Electronic Programme GuideCalling up the Electronic Programme Guide Interrupting the download procedureNow Table with current programme contents Downloading EPGplus dataEPGplus Info NextMore EPGplus functionsUse the up/down arrow keys to select the line Delete timer EPGplus Timer programmingDeleting the EPGplus timer event Timer settings pre- and post-run timeEPGplus overview by type of programme genre Use the arrow keys up/down to mark the line Timer settingsEPGplus programme overview Displaying the EPGplus overview for other channelsEnding EPGplus mode Sleep TimerInstant recording Timer-controlled recordingHard drive operation RecordingInstant recording Starting a recording manually Option Ending a recording manuallyEnd recording automatically Option Timer recordings Manual programming of timer Programming a new Timer event Timer overviewChanging Timer programming Delete Timer programmingTime Timeshift functionRecording information Setting markers while recordingPlayback function Playing back recordings Reproducing hard drive recordingsSlow motion Pause/Freeze frameFast forward and rewind Jogshuttle functionEnd playback session Setting markersCreate Picture Jumping to markersPause Switching folder levelsOn-screen controls Skipping titlesLanguage select key 2.3 MP3 playback modesPlaylist To draw up a play list To display playlistFunction Display Screen Replay Lists with the up/down arrow keys To delete titles from the playlistTo delete a playlist Viewing picturesPlaylist To draw up a playlist Show next/previous pictureRotate picture Slide showReplay lists How to delete pictures from the playlistParental control Managing the hard driveManaging recordings DeleteDeleting a marker Setting a markerGoing to any spot of the recording FunctionsDeleting a section Extracting a sectionLine rename mark Renaming a recording Splitting a recordingEnlarging a video Managing music/picturesReduce video Copy CopyingMarking blocks MovingUse the arrow keys up/down to mark the line Copy recordings Sampling MP3 files/showing picture filesCopying recordings ExportingPreview Hard drive informationPreview Hard drive maintenance Checking the hard driveFormatting the hard drive Select a Favourites list Configuring the Favourites listChanging the basic programming Calling up the programme list managerAdding programmes to the Favourites list Sorting programmes Deleting from the Total listStart category Programming the electronic programme guideUpdating Updating timeSelecting TV channels/programmes EPG channelSelecting radio channels/programmes Start updatePIN query mode Parental controlProgramme search/scan Satellite scan Automatic scanSatellite Use the arrow keys up/down to mark the line Search modeUse the arrow keys up/down to mark the line Symbol rate Transponder scanManual search During the searchAfter the search Back Service settingsActivate factory default setting Delete all programmesStart availability test manually Update programme list automaticallyUpdating the programme list Isipro Isipro channelAdding a TV or radio programme Update programme list manuallyAdapting programmes Deleting programmesUpdating software Software channelNew software available Manual initialisation of the CI-Modules System configurationCopying settings Encryption systemDeleting existing limits Setting the East limitUse with a rotating antenna DiSEqC East and West limitsGeo-positioning Setting the West limitSetting a user-defined satellite position User satellite Setting a satellite positionPositioning antenna manually Adjusting the satellite antennaTest transponder/LNB configuration Automatic fine adjustment AutofocusActions Current satellite listSaving a satellite position Turning to a satellite positionReference position Deleting a satellite positionCard-reader Technical dataDBS-Tuner Common InterfaceOutput digital Audio decodingAudio parameters Output analogue Input analogueMains jack LNB power supplyTimer HDMI-outputRemote control Power supplyGeneral Problem Possible cause Solution Troubleshooting guideProblem Possible cause Solution For everyday use

HD S2X specifications

The TechniSat HD S2X is a versatile satellite receiver designed for high-definition viewing. This compact device combines advanced technology and user-friendly features to deliver an exceptional entertainment experience. Offering unmatched image quality, the HD S2X supports 4K Ultra HD resolution, ensuring that every detail and color comes to life on your screen.

One of the standout features of the TechniSat HD S2X is its ability to receive various satellite signals. With support for DVB-S2 and DVB-S standards, it can easily tune into a wide range of channels and services without hassle. This versatility allows users to access both standard and high-definition programming, making it a great choice for those who want to explore diverse entertainment options.

Equipped with a powerful multi-core processor, the HD S2X ensures fast channel switching and smooth navigation through menus. Its intuitive user interface is designed to provide easy access to all features, including channel lists, settings, and viewing history. Additionally, the device comes with a user-friendly remote control, which allows for convenient operation from the comfort of your sofa.

The TechniSat HD S2X also features built-in Wi-Fi capability, enabling users to connect to the internet effortlessly. This connectivity allows for online streaming and access to various applications. Users can enjoy additional content beyond traditional satellite channels, including catch-up TV services and online video platforms.

Another remarkable aspect of the HD S2X is its support for multi-room functionality. This means you can connect multiple HDMI-enabled devices within your home and enjoy your favorite shows in different rooms without interruption. Furthermore, it supports recording capabilities, enabling users to save their favorite programs for later viewing directly onto an external hard drive.

The device also comes with an Integrated Conditional Access Module (CI+) slot, allowing for secure access to pay-TV services. Its compatibility with various media formats ensures that users can enjoy a wide range of video files, music, and photos.

In conclusion, the TechniSat HD S2X stands out in the satellite receiver market. With its full HD capabilities, easy-to-use interface, internet connectivity, and versatile recording options, it offers a comprehensive solution for all your entertainment needs. Whether you are a casual viewer or a dedicated enthusiast, the TechniSat HD S2X is an excellent investment for elevating your viewing experience.
Top Page Image Contents