TechniSat HD S2X manual Problem Possible cause Solution

Page 91

Problem

Possible cause

 

Solution

 

 

 

Time not shown in standby mode

Time not acquired

Set to major channel e.g. ZDF for

 

 

approx.30 seconds

 

 

 

 

Receiver cannot be operated

Unit blocked

>

Press and hold On/standby key

 

 

 

on unit or remote control for

 

 

 

approx. 5 seconds.

 

 

 

Unit cannot be switched on or

Unit blocked

Perform Flash reset: Note!

operated

 

All personal settings will be lost.

 

 

>

Pull out mains plug.

 

 

>

Press and hold Standby and

 

 

 

Programme up keys on the

 

 

 

unit simultaneously.

 

 

>

Keeping the Standby and

 

 

 

Programme up keys held in,

 

 

 

put mains plug back in.

 

 

>

Hold keys in for approx.

 

 

 

5 seconds and then let them

 

 

 

go. The message “AutoInstall”

 

 

 

appears in the display.

 

 

 

USB device not recognised

USB device is formatted in the

Format USB device in FAT32 file

 

wrong file system

system

 

 

 

No more hard drive recordings are

Hard drive is full

Delete existing recording(s)

possible

 

 

 

 

 

 

Deleting hard drive recordings not

Damaged hard drive file system

Check hard drive (Point 8.3.5)

possible

 

 

 

 

 

 

Second encrypted programme

The two programmes selected are

Select two programmes located on

cannot be viewed.

not located on the same transponder

the same transponder

 

 

 

 

CI dual decoding is not switched on

Switch on dual decoding

 

 

(see Point 6.5.3)

 

 

 

The CI module is not compatible with Use a module with “Dual<Decrypt”

 

“Dual Decrypt”

compatibility

13

91

Image 91
Contents DiSEqC DigiCorder HD S2X P V RContents Hard drive operation OperationChanging basic programming Illustrations Remote controlBack of unit Front of unitUse with a rotating antenna DiSEqC Dear customer Please read this first Disposal adviceSafety notes Important notes on operation When not in useImportant note on data security VCR Connecting the DVB receiverExternal unit Mains power connectionConnection to a television set USB-Buchse Video cassette recorder VCRHiFi/Surround Sound amplifier Serial interface RSOperating language Initial installationCountry setting Antenna signalsContinue Antenna configurationSoftware updating Programme/channel search/ISIPROLoading EPGplus data Ending the installation assistantCountry SettingsBasic settings Operating languagePicture settings Use the up/down arrow keys to mark the line Sound Settings Sound settingsHdmi resolution TV Scart modeDolby Digital Antenna settingsAudio speech Sub-title languageMulti-tenna Switching DiSEqC on and offPress the OK key. Example 1 2 satellites Twin-LNBs Setting the switching matrixTest-Transponder Additional settings/LNB propertiesSystem examples LNB TypeRotating antenna Special functionsSeveral Favourites lists Radio background picture Network settingsDisplay time Information Banner CI dual decodingPage Operation Switching on and offProgramme selection Calling up blocked programmes Receiving encrypted programmesInfobox Simultaneous reception of two encrypted programmes Special functionsOption channels Selecting a starting timeTV/Radio switching Volume controlSelecting a different language Transponder information Return to last programme previously selectedDisplay clock and programme information Additional programme informationVideotext PIP function picture in picture SubtitlesCall up PIP operation Change PIP pictures Switch off PIP operationZoom picture EPGplus Electronic Programme GuideCalling up the Electronic Programme Guide Interrupting the download procedureNow Table with current programme contents Downloading EPGplus dataEPGplus Info NextMore EPGplus functionsUse the up/down arrow keys to select the line Delete timer EPGplus Timer programmingDeleting the EPGplus timer event Timer settings pre- and post-run timeEPGplus overview by type of programme genre Use the arrow keys up/down to mark the line Timer settingsEPGplus programme overview Displaying the EPGplus overview for other channelsEnding EPGplus mode Sleep TimerInstant recording Timer-controlled recordingHard drive operation RecordingEnding a recording manually Instant recording Starting a recording manually OptionEnd recording automatically Option Timer recordings Manual programming of timer Programming a new Timer event Timer overviewChanging Timer programming Delete Timer programmingTime Timeshift functionRecording information Setting markers while recordingPlayback function Playing back recordings Reproducing hard drive recordingsSlow motion Pause/Freeze frameFast forward and rewind Jogshuttle functionEnd playback session Setting markersCreate Picture Jumping to markersPause Switching folder levelsOn-screen controls Skipping titlesLanguage select key 2.3 MP3 playback modesTo display playlist Playlist To draw up a play listFunction Display Screen Replay Lists with the up/down arrow keys To delete titles from the playlistTo delete a playlist Viewing picturesPlaylist To draw up a playlist Show next/previous pictureRotate picture Slide showReplay lists How to delete pictures from the playlistParental control Managing the hard driveManaging recordings DeleteDeleting a marker Setting a markerGoing to any spot of the recording FunctionsExtracting a section Deleting a sectionLine rename mark Renaming a recording Splitting a recordingManaging music/pictures Enlarging a videoReduce video Copy CopyingMarking blocks MovingUse the arrow keys up/down to mark the line Copy recordings Sampling MP3 files/showing picture filesCopying recordings ExportingHard drive information PreviewPreview Checking the hard drive Hard drive maintenanceFormatting the hard drive Select a Favourites list Configuring the Favourites listChanging the basic programming Calling up the programme list managerAdding programmes to the Favourites list Sorting programmes Deleting from the Total listStart category Programming the electronic programme guideUpdating Updating timeSelecting TV channels/programmes EPG channelSelecting radio channels/programmes Start updatePIN query mode Parental controlProgramme search/scan Satellite scan Automatic scanSatellite Use the arrow keys up/down to mark the line Search modeUse the arrow keys up/down to mark the line Symbol rate Transponder scanDuring the search Manual searchAfter the search Back Service settingsActivate factory default setting Delete all programmesStart availability test manually Update programme list automaticallyUpdating the programme list Isipro Isipro channelAdding a TV or radio programme Update programme list manuallyAdapting programmes Deleting programmesSoftware channel Updating softwareNew software available Manual initialisation of the CI-Modules System configurationCopying settings Encryption systemDeleting existing limits Setting the East limitUse with a rotating antenna DiSEqC East and West limitsGeo-positioning Setting the West limitSetting a user-defined satellite position User satellite Setting a satellite positionPositioning antenna manually Adjusting the satellite antennaTest transponder/LNB configuration Automatic fine adjustment AutofocusActions Current satellite listSaving a satellite position Turning to a satellite positionReference position Deleting a satellite positionCard-reader Technical dataDBS-Tuner Common InterfaceOutput digital Audio decodingAudio parameters Output analogue Input analogueMains jack LNB power supplyTimer HDMI-outputPower supply Remote controlGeneral Problem Possible cause Solution Troubleshooting guideProblem Possible cause Solution For everyday use

HD S2X specifications

The TechniSat HD S2X is a versatile satellite receiver designed for high-definition viewing. This compact device combines advanced technology and user-friendly features to deliver an exceptional entertainment experience. Offering unmatched image quality, the HD S2X supports 4K Ultra HD resolution, ensuring that every detail and color comes to life on your screen.

One of the standout features of the TechniSat HD S2X is its ability to receive various satellite signals. With support for DVB-S2 and DVB-S standards, it can easily tune into a wide range of channels and services without hassle. This versatility allows users to access both standard and high-definition programming, making it a great choice for those who want to explore diverse entertainment options.

Equipped with a powerful multi-core processor, the HD S2X ensures fast channel switching and smooth navigation through menus. Its intuitive user interface is designed to provide easy access to all features, including channel lists, settings, and viewing history. Additionally, the device comes with a user-friendly remote control, which allows for convenient operation from the comfort of your sofa.

The TechniSat HD S2X also features built-in Wi-Fi capability, enabling users to connect to the internet effortlessly. This connectivity allows for online streaming and access to various applications. Users can enjoy additional content beyond traditional satellite channels, including catch-up TV services and online video platforms.

Another remarkable aspect of the HD S2X is its support for multi-room functionality. This means you can connect multiple HDMI-enabled devices within your home and enjoy your favorite shows in different rooms without interruption. Furthermore, it supports recording capabilities, enabling users to save their favorite programs for later viewing directly onto an external hard drive.

The device also comes with an Integrated Conditional Access Module (CI+) slot, allowing for secure access to pay-TV services. Its compatibility with various media formats ensures that users can enjoy a wide range of video files, music, and photos.

In conclusion, the TechniSat HD S2X stands out in the satellite receiver market. With its full HD capabilities, easy-to-use interface, internet connectivity, and versatile recording options, it offers a comprehensive solution for all your entertainment needs. Whether you are a casual viewer or a dedicated enthusiast, the TechniSat HD S2X is an excellent investment for elevating your viewing experience.