TechniSat HD S2X manual Initial installation, Operating language, Country setting, Picture format

Page 15

5 Initial installation

After you have read the safety notes and connected the unit as described in Chapter 4, switch the unit on as described in Chapter 7.

When switching on the receiver for the first time, the starting window of the installation assistant AutoInstall will be displayed. The installation assistant allows you to make the most important settings of your digital receiver in the simplest way possible.

At each step of the installation there will be an explanation as to which settings can be made.

You can interrupt the initial installation by pressing the red function key in the starting window of the installation assistant.

In the following steps of the installation, you can then confirm the settings made by pressing the green function key; you will then be taken to the next step of the installation procedure.

If you press the red function key you will be taken to the previous step of the installation, thus giving you an opportunity to correct errors at any time.

If the initial installation is not performed, or if it is aborted, the receiver will commence operation with a standard pre-programmed procedure.

The initial installation process shown here serves merely as an example. The exact process of the initial installation will depend on the settings you select. Please therefore follow all instructions displayed on screen carefully

Operating language

>When starting the installation assistant, the first selection window to be displayed will be that for the Operating language.

>Using the arrow keys, select the desired operating language.

>Confirm by pressing the green function key Accept.

Country setting

>Using the arrow keys, select the country in which the unit is being used. The selection made here will result in the time zone being set, and will affect the sorting of the programme list.

>Using the green function key confirm Accept in order to accept the selection of the picture format.

Picture format

>Using the arrow keys right/left adjust the picture format of the connected TV set. Depending on your selection the automatic alignment of the picture to the TV set will take place.

>To accept the selection and to gain access to the selection of antenna signals confirm with OK.

Antenna signals

Here you must select how many antenna signals are connected to the receiver.

>Using the right/left arrow keys select whether you have connected one or two antenna signals.

5

15

Image 15
Contents DiSEqC DigiCorder HD S2X P V RContents Hard drive operation OperationChanging basic programming Illustrations Remote controlBack of unit Front of unitUse with a rotating antenna DiSEqC Dear customer Please read this first Disposal adviceSafety notes When not in use Important notes on operationImportant note on data security VCR Connecting the DVB receiverMains power connection External unitConnection to a television set USB-Buchse Video cassette recorder VCRHiFi/Surround Sound amplifier Serial interface RSOperating language Initial installationCountry setting Antenna signalsContinue Antenna configurationSoftware updating Programme/channel search/ISIPROLoading EPGplus data Ending the installation assistantCountry SettingsBasic settings Operating languagePicture settings Use the up/down arrow keys to mark the line Sound Settings Sound settingsHdmi resolution TV Scart modeDolby Digital Antenna settingsAudio speech Sub-title languageMulti-tenna Switching DiSEqC on and offPress the OK key. Example 1 2 satellites Twin-LNBs Setting the switching matrixTest-Transponder Additional settings/LNB propertiesSystem examples LNB TypeSpecial functions Rotating antennaSeveral Favourites lists Radio background picture Network settingsDisplay time Information Banner CI dual decodingPage Switching on and off OperationProgramme selection Receiving encrypted programmes Calling up blocked programmesInfobox Simultaneous reception of two encrypted programmes Special functionsOption channels Selecting a starting timeVolume control TV/Radio switchingSelecting a different language Transponder information Return to last programme previously selectedDisplay clock and programme information Additional programme informationVideotext Subtitles PIP function picture in pictureCall up PIP operation Change PIP pictures Switch off PIP operationZoom picture EPGplus Electronic Programme GuideCalling up the Electronic Programme Guide Interrupting the download procedureNow Table with current programme contents Downloading EPGplus dataEPGplus Info NextMore EPGplus functionsUse the up/down arrow keys to select the line Delete timer EPGplus Timer programmingDeleting the EPGplus timer event Timer settings pre- and post-run timeEPGplus overview by type of programme genre Use the arrow keys up/down to mark the line Timer settingsEPGplus programme overview Displaying the EPGplus overview for other channelsEnding EPGplus mode Sleep TimerInstant recording Timer-controlled recordingHard drive operation RecordingInstant recording Starting a recording manually Option Ending a recording manuallyEnd recording automatically Option Timer recordings Manual programming of timer Programming a new Timer event Timer overviewChanging Timer programming Delete Timer programmingTime Timeshift functionRecording information Setting markers while recordingPlayback function Playing back recordings Reproducing hard drive recordingsSlow motion Pause/Freeze frameFast forward and rewind Jogshuttle functionEnd playback session Setting markersCreate Picture Jumping to markersPause Switching folder levelsOn-screen controls Skipping titlesLanguage select key 2.3 MP3 playback modesPlaylist To draw up a play list To display playlistFunction Display Screen Replay Lists with the up/down arrow keys To delete titles from the playlistTo delete a playlist Viewing picturesPlaylist To draw up a playlist Show next/previous pictureRotate picture Slide showReplay lists How to delete pictures from the playlistParental control Managing the hard driveManaging recordings DeleteDeleting a marker Setting a markerGoing to any spot of the recording FunctionsDeleting a section Extracting a sectionLine rename mark Renaming a recording Splitting a recordingEnlarging a video Managing music/picturesReduce video Copy CopyingMarking blocks MovingUse the arrow keys up/down to mark the line Copy recordings Sampling MP3 files/showing picture filesCopying recordings ExportingPreview Hard drive informationPreview Hard drive maintenance Checking the hard driveFormatting the hard drive Select a Favourites list Configuring the Favourites listChanging the basic programming Calling up the programme list managerAdding programmes to the Favourites list Sorting programmes Deleting from the Total listStart category Programming the electronic programme guideUpdating Updating timeSelecting TV channels/programmes EPG channelSelecting radio channels/programmes Start updatePIN query mode Parental controlProgramme search/scan Satellite scan Automatic scanSatellite Use the arrow keys up/down to mark the line Search modeUse the arrow keys up/down to mark the line Symbol rate Transponder scanManual search During the searchAfter the search Back Service settingsActivate factory default setting Delete all programmesStart availability test manually Update programme list automaticallyUpdating the programme list Isipro Isipro channelAdding a TV or radio programme Update programme list manuallyAdapting programmes Deleting programmesUpdating software Software channelNew software available Manual initialisation of the CI-Modules System configurationCopying settings Encryption systemDeleting existing limits Setting the East limitUse with a rotating antenna DiSEqC East and West limitsGeo-positioning Setting the West limitSetting a user-defined satellite position User satellite Setting a satellite positionPositioning antenna manually Adjusting the satellite antennaTest transponder/LNB configuration Automatic fine adjustment AutofocusActions Current satellite listSaving a satellite position Turning to a satellite positionReference position Deleting a satellite positionCard-reader Technical dataDBS-Tuner Common InterfaceOutput digital Audio decodingAudio parameters Output analogue Input analogueMains jack LNB power supplyTimer HDMI-outputRemote control Power supplyGeneral Problem Possible cause Solution Troubleshooting guideProblem Possible cause Solution For everyday use

HD S2X specifications

The TechniSat HD S2X is a versatile satellite receiver designed for high-definition viewing. This compact device combines advanced technology and user-friendly features to deliver an exceptional entertainment experience. Offering unmatched image quality, the HD S2X supports 4K Ultra HD resolution, ensuring that every detail and color comes to life on your screen.

One of the standout features of the TechniSat HD S2X is its ability to receive various satellite signals. With support for DVB-S2 and DVB-S standards, it can easily tune into a wide range of channels and services without hassle. This versatility allows users to access both standard and high-definition programming, making it a great choice for those who want to explore diverse entertainment options.

Equipped with a powerful multi-core processor, the HD S2X ensures fast channel switching and smooth navigation through menus. Its intuitive user interface is designed to provide easy access to all features, including channel lists, settings, and viewing history. Additionally, the device comes with a user-friendly remote control, which allows for convenient operation from the comfort of your sofa.

The TechniSat HD S2X also features built-in Wi-Fi capability, enabling users to connect to the internet effortlessly. This connectivity allows for online streaming and access to various applications. Users can enjoy additional content beyond traditional satellite channels, including catch-up TV services and online video platforms.

Another remarkable aspect of the HD S2X is its support for multi-room functionality. This means you can connect multiple HDMI-enabled devices within your home and enjoy your favorite shows in different rooms without interruption. Furthermore, it supports recording capabilities, enabling users to save their favorite programs for later viewing directly onto an external hard drive.

The device also comes with an Integrated Conditional Access Module (CI+) slot, allowing for secure access to pay-TV services. Its compatibility with various media formats ensures that users can enjoy a wide range of video files, music, and photos.

In conclusion, the TechniSat HD S2X stands out in the satellite receiver market. With its full HD capabilities, easy-to-use interface, internet connectivity, and versatile recording options, it offers a comprehensive solution for all your entertainment needs. Whether you are a casual viewer or a dedicated enthusiast, the TechniSat HD S2X is an excellent investment for elevating your viewing experience.