TechniSat HD S2X manual Special functions, Rotating antenna, Several Favourites lists

Page 25

Polarisation

>Use the up/down arrow keys to enter the desired polarisation plane (horizontal or vertical).

Symbol rate

The symbol rate indicates the volume of data broadcast per second. This figure could be shown as, for example, 27500 (27500 symbols per second).

>Use the numeric keys to enter the correct symbol rate.

User LNB

If you have entered User LNB under the heading DiSEqC type, you can make further settings:

LOF low band

LOF (Local Oscillator Frequency) is the frequency at which an LNB converts the received frequency into what is known as the 1st intermediate frequency, which can then be received by the digital receiver. So-called Universal LNBs work with 2 LOFs, in order to convert the full frequency range of 10.7 to 11.8 GHz (low-band) and 11.7 to 12.75 GHz (high-band).

>In this line use the numeric keys to enter the LOF of the low band of your LNB.

LOF high band

>In this line use the numeric keys to enter the LOF of the high band of your LNB.

LOF transition

>In this line use the numeric keys to enter the frequency at which your LNB switches from the low band to the high band.

Signal level/quality

If you have entered the details of the test transponder correctly, the signal strength and quality will be indicated in these lines

6.5.6 Rotating antenna

If you are operating your digital receiver in conjunction with a rotating antenna equipped with a DiSEqC motor (Level 1.2), switch the DiSEqC control (Point 6.4.1) on and please note Point 4.2.3 and Point 10 of the operating manual.

6.6 Special functions

This menu allows you to make the settings for CI dual decoding, as well as for the duration for which the Infobox will be displayed, in addition to the function required to switch several Favourites lists on or off.

>Press the Menu key to call up the Main Menu.

>Use the arrow keys up/down to mark the line Settings and confirm by pressing OK.

>Now use the arrow keys up/down to mark the line Special functions.

>Confirm by pressing OK.

The menu Special functions will be displayed.

>Use the arrow keys up/down to mark the entry you wish to change.

6.6.1 Several Favourites lists

>Use the arrow keys left/right to switch the function for several Favourites lists on resp. off.

6

25

Image 25
Contents DiSEqC DigiCorder HD S2X P V RContents Hard drive operation OperationChanging basic programming Illustrations Remote controlBack of unit Front of unitUse with a rotating antenna DiSEqC Dear customer Please read this first Disposal adviceSafety notes Important notes on operation When not in useImportant note on data security VCR Connecting the DVB receiverExternal unit Mains power connectionConnection to a television set HiFi/Surround Sound amplifier Video cassette recorder VCRSerial interface RS USB-BuchseCountry setting Initial installationAntenna signals Operating languageSoftware updating Antenna configurationProgramme/channel search/ISIPRO ContinueLoading EPGplus data Ending the installation assistantBasic settings SettingsOperating language CountryPicture settings Hdmi resolution Sound settingsTV Scart mode Use the up/down arrow keys to mark the line Sound SettingsAudio speech Antenna settingsSub-title language Dolby Digital Multi-tenna Switching DiSEqC on and offPress the OK key. Example 1 2 satellites Twin-LNBs Setting the switching matrixSystem examples Additional settings/LNB propertiesLNB Type Test-TransponderRotating antenna Special functionsSeveral Favourites lists Display time Information Banner Network settingsCI dual decoding Radio background picturePage Operation Switching on and offProgramme selection Calling up blocked programmes Receiving encrypted programmesInfobox Option channels Special functionsSelecting a starting time Simultaneous reception of two encrypted programmesTV/Radio switching Volume controlSelecting a different language Display clock and programme information Return to last programme previously selectedAdditional programme information Transponder informationVideotext PIP function picture in picture SubtitlesCall up PIP operation Zoom picture Switch off PIP operationEPGplus Electronic Programme Guide Change PIP picturesNow Table with current programme contents Interrupting the download procedureDownloading EPGplus data Calling up the Electronic Programme GuideMore NextEPGplus functions EPGplus InfoDeleting the EPGplus timer event EPGplus Timer programmingTimer settings pre- and post-run time Use the up/down arrow keys to select the line Delete timerEPGplus programme overview Use the arrow keys up/down to mark the line Timer settingsDisplaying the EPGplus overview for other channels EPGplus overview by type of programme genreEnding EPGplus mode Sleep TimerHard drive operation Timer-controlled recordingRecording Instant recordingEnding a recording manually Instant recording Starting a recording manually OptionEnd recording automatically Option Timer recordings Manual programming of timer Changing Timer programming Timer overviewDelete Timer programming Programming a new Timer eventTime Timeshift functionPlayback function Setting markers while recordingPlaying back recordings Reproducing hard drive recordings Recording informationFast forward and rewind Pause/Freeze frameJogshuttle function Slow motionCreate Picture Setting markersJumping to markers End playback sessionOn-screen controls Switching folder levelsSkipping titles PauseLanguage select key 2.3 MP3 playback modesTo display playlist Playlist To draw up a play listFunction Display Screen To delete a playlist To delete titles from the playlistViewing pictures Replay Lists with the up/down arrow keysRotate picture Show next/previous pictureSlide show Playlist To draw up a playlistReplay lists How to delete pictures from the playlistManaging recordings Managing the hard driveDelete Parental controlGoing to any spot of the recording Setting a markerFunctions Deleting a markerExtracting a section Deleting a sectionLine rename mark Renaming a recording Splitting a recordingManaging music/pictures Enlarging a videoReduce video Marking blocks CopyingMoving CopyCopying recordings Sampling MP3 files/showing picture filesExporting Use the arrow keys up/down to mark the line Copy recordingsHard drive information PreviewPreview Checking the hard drive Hard drive maintenanceFormatting the hard drive Changing the basic programming Configuring the Favourites listCalling up the programme list manager Select a Favourites listAdding programmes to the Favourites list Sorting programmes Deleting from the Total listUpdating Programming the electronic programme guideUpdating time Start categorySelecting TV channels/programmes EPG channelPIN query mode Start updateParental control Selecting radio channels/programmesProgramme search/scan Satellite scan Automatic scanUse the arrow keys up/down to mark the line Symbol rate Use the arrow keys up/down to mark the line Search modeTransponder scan SatelliteDuring the search Manual searchAfter the search Activate factory default setting Service settingsDelete all programmes BackUpdating the programme list Isipro Update programme list automaticallyIsipro channel Start availability test manuallyAdapting programmes Update programme list manuallyDeleting programmes Adding a TV or radio programmeSoftware channel Updating softwareNew software available Copying settings System configurationEncryption system Manual initialisation of the CI-ModulesUse with a rotating antenna DiSEqC Setting the East limitEast and West limits Deleting existing limitsGeo-positioning Setting the West limitSetting a user-defined satellite position User satellite Setting a satellite positionTest transponder/LNB configuration Adjusting the satellite antennaAutomatic fine adjustment Autofocus Positioning antenna manuallySaving a satellite position Current satellite listTurning to a satellite position ActionsReference position Deleting a satellite positionDBS-Tuner Technical dataCommon Interface Card-readerAudio parameters Output analogue Audio decodingInput analogue Output digitalTimer LNB power supplyHDMI-output Mains jackPower supply Remote controlGeneral Problem Possible cause Solution Troubleshooting guideProblem Possible cause Solution For everyday use