Thermador PRD48 Installing Anti-Tip Device, Tools Needed for Installation of Anti-Tip Device

Step 5: Installing Anti-Tip Device

WARNING — RANGE TIPPING HAZARD:

•To prevent accidental tipping of the range, attach it to the floor by installing the Anti-Tip Device supplied.

•A risk of tip-over may exist and injury can result if the appliance is not installed in accordance with these instructions. For all ranges an anti-tip device must be installed as per these instructions.

•If the range is pulled away from the wall for cleaning, service or for any other reason, ensure that the Anti- Tip Device is properly re-engaged when the range is pushed back against the wall. In the event of abnormal usage (such as a person standing, sitting, or leaning on an open door), failure to take this precaution can result in tipping of the range. Personal injury might result from spilled hot liquids or from the range itself.

WARNING — ELECRICAL SHOCK HAZARD:

• Use extreme caution when drilling holes into the wall or floor as there may be concealed electrical wires.

•Identify the electrical circuits that could be affected by the installation of the Anti-Tip Device, then turn off power to these circuits.

•Failure to follow these instructions may result in electrical shock or other personal injury.

Tools Needed for Installation of Anti-Tip Device:

•Screwdriver, Phillips

•Drill, electric or hand

•Measuring tape or ruler

•1/8” (3.17mm) drill bit (wood or metal; wall or floor)

•3/16” (4.76mm) carbide-tipped masonry drill bit (concrete or concrete block wall or floor)

•3/16” (4.76mm) anchors, drywall or concrete, 4 each (not required if mounting bracket is being attached to solid wood or metal)

•Hammer

•Pencil or other marker

WARNING

--A child or adult can tip the range and be killed.

--Verify the anti-tip device has been properly installed and engaged as per installation instructions.

--Ensure the anti-tip device is re- engaged when the range is moved. --Do not operate the range without the anti-tip device in place and engaged. --Failure to do so can result in death or serious burns to children or adults. --See further Installation Instructions.

ATTENTION — PROPERTY DAMAGE:

•Contact a qualified installer or contractor to determine the proper method for drilling holes through the wall or floor material (such as ceramic tile, hardwood, etc.)

•Do not slide the range across an unprotected floor.

•Failure to follow these instructions may result in damage to wall or floor coverings.

THERMADOR	Qty	Description
Service Part No.
415078	4	Screw, Phillips, #10 x 11/2”
		(38.1mm)
655355	1	Anti-Tip Bracket

English 12