Wire Connection, Permanent Connection Hard Wiring

Installer — show the owner the location of the circuit breaker or fuse. Mark it for easy reference.

Figure 12: Terminal Block

PERMANENT CONNECTION (HARD WIRING) —

Units may be hard wired to the power supply. The installer must provide approved flexible aluminum conduit, 3/4” (19mm) trade size, maximum 6ft (1.8m) long. Locate the terminal block on the rear of the unit and remove cover (refer to Figure 11). The conduit must be installed to the terminal block using an approved conduit connector. The free end of the conduit must be connected to a junction box provided in the electrical supply zone, as shown in Figure 3 on page 7.

Mount a strain relief (not provided) into the 1" (25.4mm) diameter hole located below the terminal block (see Figure 13). Wiring for the unit is to be brought into the terminal block through the conduit and through the strain relief. The ends of the wiring must have 1/4” faston closed- loop lugs attached, preferably soldered in place. Make the connections to the terminal block provided (see Figure 12).

If aluminum supply wiring exists in the installation, splice the aluminum house wiring with appropriate-thickness gauge copper wire for adapting to the range, using special connectors designed and certified for joining copper and aluminum wire. Follow the connector manufacturer’s recommended installation procedure.

WARNING:

Improper connection of aluminum house wiring can result in a fire or shock hazard. Use only connectors designed and certified for connecting to aluminum wire.

Terminal Block

Strain Relief

Figure 13: Strain Relief Location

4-CONDUCTOR CORD— NORMALLY, A UNIT MUST BE CONNECTED TO THE POWER SUPPLY WITH A 3- POLE, 4-CONDUCTOR CORD KIT RATED 125/250

VOLTS, 50 AMPERES, AND MARKED FOR USE WITH RANGES.

The cord kit must be attached to the range terminal block with a strain relief which will fit a 1" (25.4mm) diameter hole. If not already equipped, the cord must also have 1/4” (6mm) faston closed-loop lugs attached to the free ends of the individual conductors, preferably soldered in place.

4-Wire Connection

1.Remove upper nuts only from the terminal block studs. Do not remove lower nuts which secure range internal wiring leads.

2.Mount strain relief (not provided with range) into the 1" (25.4mm) diameter hole in the back panel located below the terminal block (see Figure 13 and

Figure 12). Route wires up through strain relief.

3.Secure the neutral, grounded wire of the supply circuit, to the center stud of the terminal block with nut (see Figure 14).

4.Secure the L1 (black) and L2 (red) power leads to the outside terminal studs (brass colored) with nuts.

5.Remove green ground screw located beneath the terminal block. Discard white wire.

6.Secure the bare copper ground lead to the range chassis using the ground screw previously used for the white wire. Be sure that neutral and ground terminals do not touch.

English 17

PRD36, PRD48 specifications

Thermador, a brand synonymous with premium kitchen appliances, offers a remarkable array of professional-style ranges, including the PRD48, PRD36, and PRD30 models. Each of these ranges embodies the brand's commitment to quality, performance, and innovation, making them ideal for both professional chefs and passionate home cooks.

Starting with the Thermador PRD48, this impressive range is equipped with a true simmer feature, allowing for precision cooking of delicate sauces or chocolates. With its 48-inch width, it boasts a spacious cooking surface that includes six powerful burners, including two Dual Fuel Burners that can deliver up to 22,000 BTUs for intense heat. The PRD48 also features a infrared broiler, which provides high heat for searing meats to perfection. Its Star Burner technology ensures even heat distribution, reducing cold spots and ensuring consistent cooking results. Furthermore, the patented Where to Buy element allows users to choose between ovens and griddles, promoting versatility in meal preparation.

The Thermador PRD36 is designed for those looking for a balance between size and functionality. This 36-inch range comes with four powerful burners, and like its larger counterpart, it features the patented Star Burner design. Both models are equipped with the ExtraLow feature, which enables ultra-low simmering for delicate dishes. The PRD36 also includes a high-performance oven with a generous capacity, perfect for baking and roasting. The sleek stainless-steel exterior not only provides durability but also enhances the aesthetic of any modern kitchen.

Lastly, the PRD30 is the most compact option in the series, measuring 30 inches. Despite its smaller size, it doesn't compromise on power or performance. The range offers four burners with the Star Burner technology, ensuring superior heat distribution. The PRD30’s oven includes convection technology, promoting even cooking results by circulating hot air throughout the oven. This model is perfect for urban kitchens where space is at a premium yet does not skimp on the features that professional chefs demand.

Overall, Thermador’s PRD series ranges, whether it be the PRD48, PRD36, or PRD30, stand out for their exceptional design, innovative technology, and unmatched performance. Each model is built to meet the needs of culinary enthusiasts, making them the centerpiece of any modern kitchen. From their powerful burners to their versatile cooking options, these ranges are built to inspire creativity and deliver outstanding results in the kitchen.