GE 200D9366P016 Replacing the light bulbs, Instructions Operating, Refrigerator Lights

Page 15

Replacing the light bulbs.

GEAppliances.com

Turning the control to the 0 (off) position does not remove power to the light circuit.

Safety

Refrigerator Lights

CAUTION: Light bulbs may be hot.

Unplug the refrigerator.

To remove the lightshield, grasp the shield at the back and pull out to release the tabs at the back.

Rotate the shielddown and then forward

to release the tabs at the front of the shield.

After replacing with an appliance bulb of the same or lower wattage, replace the shield.

Plug the refrigerator back in.

NOTE: Appliance bulbs may be ordered from GE Parts and Accessories, 800.626.2002.

Instructions Operating

Freezer Light

CAUTION: Lightbulbs may be hot.

Unplug the refrigerator.

Remove the freezer basket for access. The bulbis located at the rear of the freezer inside a light shield.

Appearance may vary

To remove, graspthe shield at the top and pullout to release the tabsat the bottom.

After replacing with an appliance bulb of the same or lower wattage, replace the shield and freezer basket.

Plug the refrigerator back in.

Instructions

Instructions

Installation

Middle Lights

CAUTION: Light bulbs may be hot.

Unplug the refrigerator.

The bulbs are located behind the crisper drawers. To remove the drawers, lift up slightly while pullingthe drawerpastthe

Lightsare behind

stop location.

 

crisperdrawers

Replace the bulbs with appliancebulbs

 

 

Light Bulbs

 

of the same or lower wattage.

 

 

Replace crisper drawersby sliding them

 

 

gently back onto the trackswhile lifting

 

 

up slightly.

 

 

Plug the refrigerator backin.

 

15

Troubleshooting Tips Consumer Support

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Write the model and serial numbers here Model # Serial # GEAppliances.comRefrigerator or Freezer Operating Instructions InstallationConsumer Support Troubleshooting Tips Before You Throw Away Your OldGEAppliances.com Operating InstructionsChanging the Temperature About the controls with temperature settingsInstallation Instructions Tips Consumer Support TroubleshootingHow it Works SafetyAbout Door Alarm on some models About TurboCool. on some modelsFilter Bypass Plug When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeDo not overtighten About the water filter. on 20 models onlyConsumer Support Installation InstructionsTroubleshooting Tips About the shelves and binsShelf Saver Rack on some models About the additionalfeaturesAdjustable Bins on the Door Instructions Operating Non-Adjustable Bins on the DoorFruit and Vegetable Crisper Adjustable Humidity Crisper on some modelsAdjustable Temperature Deli Pan About the crispersand pansBasket Removal Instructions InstallationAbout the freezer Freezer Shelves and BasketsAutomatic Icemaker on some models Accessing Ice and Reaching the Power SwitchIcemaker Accessory Kit About the automatic icemakerCare and cleaning of the refrigerator Cleaning the OutsideCleaning the Inside Preparing to Move Care and cleaningof the refrigerator.Behind the Refrigerator Preparing for VacationFreezer Light Replacing the light bulbsInstructions Operating Refrigerator LightsRead these instructions completely and carefully Before YOU BeginPreparation Tools YOU MAY NeedConnecting the Refrigerator To the House Water Line Refrigerator LocationClearances PUT the Refrigeratorin Place Icemaker-Installed ModelsTurn on the Water Supply Plug in the RefrigeratorStainless steel and plastic handles Remove the Fresh Food Door HandleStainless steel on Some models Plastic handle on some modelsAttach the Fresh Food Door Handle Stainless steel handlePlastic handle SET the Controls Leveling legs have 2 purposesRefrigerator, counterclockwise to lower it Remove the Base Grille Remove the BasketTwo people may be required to complete this procedure Replace the Freezer BasketAttach and Secure the Drawer Front to the Slides Tools YOU will Need Important NotesRemove Center Hinge Installcenter HingeRehang Refrigeratordoor Install the Logo BadgeRemoving the DOORSDouble Door Refrigerator Models only Remove Freezer Drawer Remove Opposite DoorReplace Freezer Drawer Rehang RefrigeratordoorsReplace Opposite Door Align Double DoorsWhat YOU will Need Installing the Waterline Icemaker ModelsTake care not to allow water to drain into the drill Shut OFF the Main Water SupplyChoose the Valve Location Drill the Hole for the ValveFlush OUT the Tubing Fasten the Shutoff ValveTighten the Pipe Clamp Route the TubingBefore you callfor service… Safety Instructions Operating Instructions InstallationNormal operatingsounds Safety Instructions Before you call for service…Odor to refrigerator Pops open when Open, the freezer door/drawerIce cubes have Food transmitting odor/taste Slow ice cube freezing Door left openOperating Instructions Safety Instructions Installation When opening or Light remains red Be resetRefrigerator beeping This is the door alarm Control setting isInstructions Ownership Registration Page Safety Instructions Operating Instructions For The Period GE Will ReplaceWhat GE Will Not Cover Customer Warranty Special Notices Performance Data SheetOperating Specifications General Installation/Operation/Maintenance RequirementsStandardNo Aesthetic Effects Water Treatment Device Water Treatment Device Certificate Number

200D9366P016 specifications

The GE 200D9366P016 is a notable component within General Electric's (GE) expansive portfolio, particularly recognized for its application in industrial environments requiring robust and reliable performance. This function-oriented device is often employed in various sectors, including power generation, oil and gas, and manufacturing, where operational efficiency and precision are paramount.

One of the primary features of the GE 200D9366P016 is its exceptional durability. Constructed to withstand harsh operating conditions, it is engineered with high-quality materials that resist wear and tear. This durability not only extends the lifespan of the component but also reduces maintenance needs, allowing for longer intervals between service checks, thus saving both time and money for users.

The GE 200D9366P016 incorporates advanced technologies designed to enhance efficiency. It is often embedded with smart sensing capabilities that facilitate real-time monitoring of operational parameters. This feature enables users to track performance metrics, detect potential failures before they escalate, and optimize operational workflows.

In addition to its advanced sensing technologies, the GE 200D9366P016 is designed for seamless integration with a wide range of industrial systems. This interoperability is crucial for facilities that utilize various GE products or require compatibility with third-party systems. The component's design ensures that it can be easily adapted to different configurations, thereby enabling users to customize solutions based on specific operational requirements.

The product’s user-friendly interface is another significant characteristic, allowing operators to easily interact with the device and access critical data and controls. Clear displays, coupled with intuitive controls, enable quick and efficient operation, minimizing the learning curve for new users.

Moreover, the GE 200D9366P016 is backed by extensive technical support and documentation from GE, enhancing user confidence in installation and operation. Clients benefit from a wealth of resources, including troubleshooting guides and user manuals, ensuring that they can maximize the utility of the component.

Overall, the GE 200D9366P016 stands out for its robust construction, advanced technological integration, seamless compatibility, and user-centric design, making it a preferred choice for industries that prioritize reliability and efficiency in their operations.
Top Page Image Contents