GE 200D9366P016 operating instructions StandardNo Aesthetic Effects

Page 44

Performance Data Sheet

SmartWater Filtration System

GSWF Cartridge

This system has been tested according to NSF/ANSI 42/53 for reduction of the substances listed below.

The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53.*

(100% safety factors built in for unmetered usage)

StandardNo. 42: Aesthetic Effects

Parameter

USEPA

Influent

InfluentChallenge

Effluent

% Reduction

Min. Required

 

MCL

Average

Concentration

Average

Maximum

Average

Minimum

Reduction

Chlorine

—

1.845mg/L

2.0 mg/L+10%

< 0.05mg/L

0.05mg/L

> 97.29%

96.43%

> 50%

T & O

—

—

—

—

—

—

—

—

Particulate**

—

143,333#/mL

at least 10,000 particles/mL

29.83#/mL

140 #/mL

99.98%

99.91%

> 85%

StandardNo. 53: HealthEffects

Parameter

USEPA

Influent

Influent Challenge

Effluent

% Reduction

Min. Required

 

MCL

Average

Concentration

Average

Maximum

Average

Minimum

Reduction

Turbidity

1 NTU***

10.3NTU***

1+1 NTU***

0.106NTU

0.14NTU

98.97%

98.61%

0.5 NTU

 

 

 

 

 

 

 

 

 

Cysts

99.95% Reduction

200,000#/L

Minimum 50,000 L

0

0

> 99.99%

> 99.99%

> 99.95%

 

 

 

 

 

 

 

 

 

Leadat pH 6.5

0.015mg/L

0.15mg/L

0.15mg/L+10%

< 0.001mg/L

< 0.001mg/L

> 99.33%

> 99.33%

0.010mg/L

Leadat pH 8.5

0.015mg/L

0.14mg/L

0.15mg/L+10%

0.001mg/L

0.003mg/L

> 99.29%

97.86%

0.010mg/L

 

 

 

 

 

 

 

 

 

Lindane

0.0002mg/L

0.0216mg/L

0.002mg/L+10%

< 0.00002 mg/L

< 0.00002mg/L

99.07%

98.75%

0.0002mg/L

 

 

 

 

 

 

 

 

 

Atrazine

0.003 mg/L

0.008mg/L

0.009mg/L+10%

< 0.002mg/L

< 0.002mg/L

> 76.12%

> 66.67%

0.003mg/L

*Tested using a flow rate of 0.5 gpm; pressure of 60 psig; pH of 7.5 ± 0.5; temp. of 68° ± 5°F (20° ± 3°C) ** Measurement in Particles/ml. Particles used were 0.5-1 microns

*** NTU=Nephelometric Turbidity units

Operating Specifications

■Capacity:certified for up to 750 gallons (2,838 l); up to six months

■Pressure requirement: 40–120 psi (2.8–8.2 bar)

■Temperature: 33–100ºF (0.6–38ºC)

■Flow rate: 0.5 gpm (1.9 lpm)

General Installation/Operation/Maintenance Requirements

■Flush new cartridge at full flow for 3 minutes to purge out trapped air.

■Replace cartridge when flow becomes too slow.

Special Notices

■Installation instructions, parts and service availability, and standard warranty are included with the product when shipped.

■This drinking water system must be maintained according to manufacturer’s instructions, including replacement of filter cartridges.

■Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.

■The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.

■Check for compliance with the state and local laws and regulations.

■Note that while the testing was performed under standard laboratory conditions, actual performance may vary. Systems must be installed and operated in accordance with manufacturer’s recommended procedures and guidelines.

System tested and certified by NSF International against Standard 42 for the reduction of chlorine, taste and odor, particulate Class I and Standard 53 for the reduction of cyst, lead, Lindane, Atrazine and turbidity.

NSF®

Manufactured for: General Electric Company, Louisville, KY 40225

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents GEAppliances.com Write the model and serial numbers here Model # Serial #Operating Instructions Installation Consumer Support Troubleshooting TipsBefore You Throw Away Your Old Refrigerator or FreezerOperating Instructions GEAppliances.comAbout the controls with temperature settings Installation Instructions TipsConsumer Support Troubleshooting Changing the TemperatureSafety About Door Alarm on some modelsAbout TurboCool. on some models How it WorksWhen to Replace the Filter Installing the Filter CartridgeWater Filter Cartridge Filter Bypass PlugAbout the water filter. on 20 models only Do not overtightenInstallation Instructions Troubleshooting TipsAbout the shelves and bins Consumer SupportAbout the additionalfeatures Adjustable Bins on the DoorInstructions Operating Non-Adjustable Bins on the Door Shelf Saver Rack on some modelsAdjustable Humidity Crisper on some models Adjustable Temperature Deli PanAbout the crispersand pans Fruit and Vegetable CrisperInstructions Installation About the freezerFreezer Shelves and Baskets Basket RemovalAccessing Ice and Reaching the Power Switch Icemaker Accessory KitAbout the automatic icemaker Automatic Icemaker on some modelsCleaning the Inside Care and cleaning of the refrigeratorCleaning the Outside Care and cleaningof the refrigerator. Behind the RefrigeratorPreparing for Vacation Preparing to MoveReplacing the light bulbs Instructions OperatingRefrigerator Lights Freezer LightBefore YOU Begin PreparationTools YOU MAY Need Read these instructions completely and carefullyClearances Connecting the Refrigerator To the House Water LineRefrigerator Location Icemaker-Installed Models Turn on the Water SupplyPlug in the Refrigerator PUT the Refrigeratorin PlaceRemove the Fresh Food Door Handle Stainless steel on Some modelsPlastic handle on some models Stainless steel and plastic handlesPlastic handle Attach the Fresh Food Door HandleStainless steel handle Refrigerator, counterclockwise to lower it SET the ControlsLeveling legs have 2 purposes Remove the Basket Remove the Base GrilleAttach and Secure the Drawer Front to the Slides Two people may be required to complete this procedureReplace the Freezer Basket Important Notes Tools YOU will NeedInstallcenter Hinge Remove Center HingeInstall the Logo Badge Rehang RefrigeratordoorRemoving the DOORSDouble Door Refrigerator Models only Remove Opposite Door Remove Freezer DrawerRehang Refrigeratordoors Replace Opposite DoorAlign Double Doors Replace Freezer DrawerInstalling the Waterline Icemaker Models What YOU will NeedShut OFF the Main Water Supply Choose the Valve LocationDrill the Hole for the Valve Take care not to allow water to drain into the drillFasten the Shutoff Valve Tighten the Pipe ClampRoute the Tubing Flush OUT the TubingNormal operatingsounds Before you callfor service…Safety Instructions Operating Instructions Installation Before you call for service… Safety InstructionsPops open when Open, the freezer door/drawer Ice cubes have Food transmitting odor/tasteSlow ice cube freezing Door left open Odor to refrigeratorOperating Instructions Safety Instructions Installation Light remains red Be reset Refrigerator beeping This is the door alarmControl setting is When opening orInstructions Ownership Registration Page What GE Will Not Cover Safety Instructions Operating InstructionsFor The Period GE Will Replace Customer Warranty Performance Data Sheet Operating SpecificationsGeneral Installation/Operation/Maintenance Requirements Special NoticesStandardNo Aesthetic Effects Water Treatment Device Water Treatment Device Certificate Number

200D9366P016 specifications

The GE 200D9366P016 is a notable component within General Electric's (GE) expansive portfolio, particularly recognized for its application in industrial environments requiring robust and reliable performance. This function-oriented device is often employed in various sectors, including power generation, oil and gas, and manufacturing, where operational efficiency and precision are paramount.

One of the primary features of the GE 200D9366P016 is its exceptional durability. Constructed to withstand harsh operating conditions, it is engineered with high-quality materials that resist wear and tear. This durability not only extends the lifespan of the component but also reduces maintenance needs, allowing for longer intervals between service checks, thus saving both time and money for users.

The GE 200D9366P016 incorporates advanced technologies designed to enhance efficiency. It is often embedded with smart sensing capabilities that facilitate real-time monitoring of operational parameters. This feature enables users to track performance metrics, detect potential failures before they escalate, and optimize operational workflows.

In addition to its advanced sensing technologies, the GE 200D9366P016 is designed for seamless integration with a wide range of industrial systems. This interoperability is crucial for facilities that utilize various GE products or require compatibility with third-party systems. The component's design ensures that it can be easily adapted to different configurations, thereby enabling users to customize solutions based on specific operational requirements.

The product’s user-friendly interface is another significant characteristic, allowing operators to easily interact with the device and access critical data and controls. Clear displays, coupled with intuitive controls, enable quick and efficient operation, minimizing the learning curve for new users.

Moreover, the GE 200D9366P016 is backed by extensive technical support and documentation from GE, enhancing user confidence in installation and operation. Clients benefit from a wealth of resources, including troubleshooting guides and user manuals, ensuring that they can maximize the utility of the component.

Overall, the GE 200D9366P016 stands out for its robust construction, advanced technological integration, seamless compatibility, and user-centric design, making it a preferred choice for industries that prioritize reliability and efficiency in their operations.
Top Page Image Contents