GE 200D9366P016 Remove the Fresh Food Door Handle, Stainless steel on Some models

Page 19

Installation Instructions

6

REMOVE THE FRESH FOOD

DOOR HANDLE

(For placement in the installation location or reversal of the handles – on some models)

Stainless steel (on

 

some models):

 

A REMOVING

 

THE DOOR

 

HANDLE: Loosen

Badge

the set screws

with the 3/32″

A

Allen wrench

 

and remove

 

the handle.

B

NOTE: For

 

Double Door

Mounting

models follow

Fasteners

the same

(appearance may vary)

procedure on

 

the opposite door.

 

Plastic handle (on some models):

AREMOVING THE DOOR HANDLE: Depress the tab on the underside of the handle and slide the handle up and off of the mounting fasteners.

REVERSING THE

 

DOOR HANDLE

 

(on some

B

models):

 

• Remove

Badge

the handle

 

mounting

A

fasteners with

a 3/16″ Allen

 

wrench and

Mounting

transfer

Fasteners

the handle

 

mounting

(appearance may vary)

fasteners to

 

the right side.

 

•Remove the logo badge.

•Remove and transfer the plug button to the left side of the fresh food door. NOTE: Use a flat plastic edge to prevent damaging the door. Remove any adhesive on the door with a mild detergent. Remove the paper covering on the adhesive backing on

the logo badge prior to carefully attaching the badge to the door.

7REMOVE THE FREEZER DOOR HANDLE

Stainless steel and plastic handles:

ALoosen the set screws located on the″ underside of the handle with the 1/8 Allen wrench and remove the handle.

NOTE: If the handle mounting fasteners″need to be tightened or removed, use a 3/16 Allen wrench.

A

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Write the model and serial numbers here Model # Serial # GEAppliances.comRefrigerator or Freezer Operating Instructions InstallationConsumer Support Troubleshooting Tips Before You Throw Away Your OldGEAppliances.com Operating InstructionsChanging the Temperature About the controls with temperature settingsInstallation Instructions Tips Consumer Support TroubleshootingHow it Works SafetyAbout Door Alarm on some models About TurboCool. on some modelsFilter Bypass Plug When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeDo not overtighten About the water filter. on 20 models onlyConsumer Support Installation InstructionsTroubleshooting Tips About the shelves and binsShelf Saver Rack on some models About the additionalfeaturesAdjustable Bins on the Door Instructions Operating Non-Adjustable Bins on the DoorFruit and Vegetable Crisper Adjustable Humidity Crisper on some modelsAdjustable Temperature Deli Pan About the crispersand pansBasket Removal Instructions InstallationAbout the freezer Freezer Shelves and BasketsAutomatic Icemaker on some models Accessing Ice and Reaching the Power SwitchIcemaker Accessory Kit About the automatic icemakerCleaning the Outside Care and cleaning of the refrigeratorCleaning the Inside Preparing to Move Care and cleaningof the refrigerator.Behind the Refrigerator Preparing for VacationFreezer Light Replacing the light bulbsInstructions Operating Refrigerator LightsRead these instructions completely and carefully Before YOU BeginPreparation Tools YOU MAY NeedRefrigerator Location Connecting the Refrigerator To the House Water LineClearances PUT the Refrigeratorin Place Icemaker-Installed ModelsTurn on the Water Supply Plug in the RefrigeratorStainless steel and plastic handles Remove the Fresh Food Door HandleStainless steel on Some models Plastic handle on some modelsStainless steel handle Attach the Fresh Food Door HandlePlastic handle Leveling legs have 2 purposes SET the ControlsRefrigerator, counterclockwise to lower it Remove the Base Grille Remove the BasketReplace the Freezer Basket Two people may be required to complete this procedureAttach and Secure the Drawer Front to the Slides Tools YOU will Need Important NotesRemove Center Hinge Installcenter HingeRehang Refrigeratordoor Install the Logo BadgeRemoving the DOORSDouble Door Refrigerator Models only Remove Freezer Drawer Remove Opposite DoorReplace Freezer Drawer Rehang RefrigeratordoorsReplace Opposite Door Align Double DoorsWhat YOU will Need Installing the Waterline Icemaker ModelsTake care not to allow water to drain into the drill Shut OFF the Main Water SupplyChoose the Valve Location Drill the Hole for the ValveFlush OUT the Tubing Fasten the Shutoff ValveTighten the Pipe Clamp Route the TubingSafety Instructions Operating Instructions Installation Before you callfor service…Normal operatingsounds Safety Instructions Before you call for service…Odor to refrigerator Pops open when Open, the freezer door/drawerIce cubes have Food transmitting odor/taste Slow ice cube freezing Door left openOperating Instructions Safety Instructions Installation When opening or Light remains red Be resetRefrigerator beeping This is the door alarm Control setting isInstructions Ownership Registration Page For The Period GE Will Replace Safety Instructions Operating InstructionsWhat GE Will Not Cover Customer Warranty Special Notices Performance Data SheetOperating Specifications General Installation/Operation/Maintenance RequirementsStandardNo Aesthetic Effects Water Treatment Device Water Treatment Device Certificate Number

200D9366P016 specifications

The GE 200D9366P016 is a notable component within General Electric's (GE) expansive portfolio, particularly recognized for its application in industrial environments requiring robust and reliable performance. This function-oriented device is often employed in various sectors, including power generation, oil and gas, and manufacturing, where operational efficiency and precision are paramount.

One of the primary features of the GE 200D9366P016 is its exceptional durability. Constructed to withstand harsh operating conditions, it is engineered with high-quality materials that resist wear and tear. This durability not only extends the lifespan of the component but also reduces maintenance needs, allowing for longer intervals between service checks, thus saving both time and money for users.

The GE 200D9366P016 incorporates advanced technologies designed to enhance efficiency. It is often embedded with smart sensing capabilities that facilitate real-time monitoring of operational parameters. This feature enables users to track performance metrics, detect potential failures before they escalate, and optimize operational workflows.

In addition to its advanced sensing technologies, the GE 200D9366P016 is designed for seamless integration with a wide range of industrial systems. This interoperability is crucial for facilities that utilize various GE products or require compatibility with third-party systems. The component's design ensures that it can be easily adapted to different configurations, thereby enabling users to customize solutions based on specific operational requirements.

The product’s user-friendly interface is another significant characteristic, allowing operators to easily interact with the device and access critical data and controls. Clear displays, coupled with intuitive controls, enable quick and efficient operation, minimizing the learning curve for new users.

Moreover, the GE 200D9366P016 is backed by extensive technical support and documentation from GE, enhancing user confidence in installation and operation. Clients benefit from a wealth of resources, including troubleshooting guides and user manuals, ensuring that they can maximize the utility of the component.

Overall, the GE 200D9366P016 stands out for its robust construction, advanced technological integration, seamless compatibility, and user-centric design, making it a preferred choice for industries that prioritize reliability and efficiency in their operations.
Top Page Image Contents