GE 200D9366P016 operating instructions Important Notes, Tools YOU will Need

Page 24

Installation Instructions

REVERSINGTHE DOORSWING (Single Door Refrigerator Models only)

IMPORTANT NOTES

When reversing the door swing:

NOTE: Door swing is not reversible on stainless steel models.

•Read the instructions all the way through before starting.

•Parts are included in the door hinge kit.

•Handle parts carefully to avoid scratching paint.

•Set screws down by their related parts to avoid using them in the wrong places.

•Provide a non-scratching work surface for the doors.

IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from the right side to the left side—if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right.

•Once door swing is finalized, ensure the logo badge is properly aligned and permanently secured to the door by removing the adhesive cover on the back side. NOTE: A replacement logo badge is included in the hinge kit.

Unplug the refrigerator from its electrical outlet.

Empty all door shelves, including the dairy compartment.

TOOLS YOU WILL NEED

Adjustable Wrench

5/16″ Socket

Ratchet/Driver

 

Masking Tape

Thin-blade Screwdriver

Phillips Screwdriver

 

Torx T-20 Driver

 

 

 

24

1REMOVE THE REFRIGERATOR DOOR

ATape the door shut with masking tape.

BRemove the hinge cover on top of the refrigerator door by carefully prying it up with a putty knife, if necessary.

CUsing a 5/16″ socket ratchet/driver, remove the bolts securing the top hinge to the cabinet. Then lift the hinge straight up to free the hinge pin from the socket in the top of the door.

DCarefully remove the door thimble from inside the socket. This will be used again when reinstalling the door on the other side.

Hinge Cover

Top Hinge

Door Thimble

ERemove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin. Ensure that the plastic hinge pin thimble remains on the hinge pin or inside door hinge pin hole located in the bottom of the door.

FSet the door on a non-scratching surface with the inside up.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents GEAppliances.com Write the model and serial numbers here Model # Serial #Operating Instructions Installation Consumer Support Troubleshooting TipsBefore You Throw Away Your Old Refrigerator or FreezerOperating Instructions GEAppliances.comAbout the controls with temperature settings Installation Instructions TipsConsumer Support Troubleshooting Changing the TemperatureSafety About Door Alarm on some modelsAbout TurboCool. on some models How it WorksWhen to Replace the Filter Installing the Filter CartridgeWater Filter Cartridge Filter Bypass PlugAbout the water filter. on 20 models only Do not overtightenInstallation Instructions Troubleshooting TipsAbout the shelves and bins Consumer SupportAbout the additionalfeatures Adjustable Bins on the DoorInstructions Operating Non-Adjustable Bins on the Door Shelf Saver Rack on some modelsAdjustable Humidity Crisper on some models Adjustable Temperature Deli PanAbout the crispersand pans Fruit and Vegetable CrisperInstructions Installation About the freezerFreezer Shelves and Baskets Basket RemovalAccessing Ice and Reaching the Power Switch Icemaker Accessory KitAbout the automatic icemaker Automatic Icemaker on some modelsCare and cleaning of the refrigerator Cleaning the OutsideCleaning the Inside Care and cleaningof the refrigerator. Behind the RefrigeratorPreparing for Vacation Preparing to MoveReplacing the light bulbs Instructions OperatingRefrigerator Lights Freezer LightBefore YOU Begin PreparationTools YOU MAY Need Read these instructions completely and carefullyConnecting the Refrigerator To the House Water Line Refrigerator LocationClearances Icemaker-Installed Models Turn on the Water SupplyPlug in the Refrigerator PUT the Refrigeratorin PlaceRemove the Fresh Food Door Handle Stainless steel on Some modelsPlastic handle on some models Stainless steel and plastic handlesAttach the Fresh Food Door Handle Stainless steel handlePlastic handle SET the Controls Leveling legs have 2 purposesRefrigerator, counterclockwise to lower it Remove the Basket Remove the Base GrilleTwo people may be required to complete this procedure Replace the Freezer BasketAttach and Secure the Drawer Front to the Slides Important Notes Tools YOU will NeedInstallcenter Hinge Remove Center HingeInstall the Logo Badge Rehang RefrigeratordoorRemoving the DOORSDouble Door Refrigerator Models only Remove Opposite Door Remove Freezer DrawerRehang Refrigeratordoors Replace Opposite DoorAlign Double Doors Replace Freezer DrawerInstalling the Waterline Icemaker Models What YOU will NeedShut OFF the Main Water Supply Choose the Valve LocationDrill the Hole for the Valve Take care not to allow water to drain into the drillFasten the Shutoff Valve Tighten the Pipe ClampRoute the Tubing Flush OUT the TubingBefore you callfor service… Safety Instructions Operating Instructions InstallationNormal operatingsounds Before you call for service… Safety InstructionsPops open when Open, the freezer door/drawer Ice cubes have Food transmitting odor/tasteSlow ice cube freezing Door left open Odor to refrigeratorOperating Instructions Safety Instructions Installation Light remains red Be reset Refrigerator beeping This is the door alarmControl setting is When opening orInstructions Ownership Registration Page Safety Instructions Operating Instructions For The Period GE Will ReplaceWhat GE Will Not Cover Customer Warranty Performance Data Sheet Operating SpecificationsGeneral Installation/Operation/Maintenance Requirements Special NoticesStandardNo Aesthetic Effects Water Treatment Device Water Treatment Device Certificate Number

200D9366P016 specifications

The GE 200D9366P016 is a notable component within General Electric's (GE) expansive portfolio, particularly recognized for its application in industrial environments requiring robust and reliable performance. This function-oriented device is often employed in various sectors, including power generation, oil and gas, and manufacturing, where operational efficiency and precision are paramount.

One of the primary features of the GE 200D9366P016 is its exceptional durability. Constructed to withstand harsh operating conditions, it is engineered with high-quality materials that resist wear and tear. This durability not only extends the lifespan of the component but also reduces maintenance needs, allowing for longer intervals between service checks, thus saving both time and money for users.

The GE 200D9366P016 incorporates advanced technologies designed to enhance efficiency. It is often embedded with smart sensing capabilities that facilitate real-time monitoring of operational parameters. This feature enables users to track performance metrics, detect potential failures before they escalate, and optimize operational workflows.

In addition to its advanced sensing technologies, the GE 200D9366P016 is designed for seamless integration with a wide range of industrial systems. This interoperability is crucial for facilities that utilize various GE products or require compatibility with third-party systems. The component's design ensures that it can be easily adapted to different configurations, thereby enabling users to customize solutions based on specific operational requirements.

The product’s user-friendly interface is another significant characteristic, allowing operators to easily interact with the device and access critical data and controls. Clear displays, coupled with intuitive controls, enable quick and efficient operation, minimizing the learning curve for new users.

Moreover, the GE 200D9366P016 is backed by extensive technical support and documentation from GE, enhancing user confidence in installation and operation. Clients benefit from a wealth of resources, including troubleshooting guides and user manuals, ensuring that they can maximize the utility of the component.

Overall, the GE 200D9366P016 stands out for its robust construction, advanced technological integration, seamless compatibility, and user-centric design, making it a preferred choice for industries that prioritize reliability and efficiency in their operations.
Top Page Image Contents