GE 20-27 owner manual Operating, Tips, Instructions Installation

Page 17

Connect the Tubing to the Refrigerator

Safety

Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

One of the illustrations below will look like the connection on your refrigerator.

Instructions

We recommend installing a water filter if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator.

1 Remove the plastic flexible cap from the water valve (refrigerator connection).

2 Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown.

3 Insert the end of the copper tubing into the water valve refrigerator connection as far as possible. While holding the tubing, tighten the

1/4Copper

Tubing

Remove screws and fold back access cover.

OR

Tubing Clamp

1/4Compression Nut

Ferrule

(sleeve)

Refrigerator

Connection

Operating

fitting.

4 Fasten the copper tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Tubing Clamp

1/4Compression Nut

Ferrule (sleeve)

Refrigerator

Connection

1/4Copper

Tubing

Instructions Installation

Turn the Water On at the Shutoff Valve

 

 

Tighten any connections that leak.

 

 

Replace the access cover and screws (on some

1

 

2

 

 

 

 

 

models).

 

 

 

 

Plug In the Refrigerator

 

 

 

Arrange the coil of copper tubing so that it does not

Push the refrigerator back to the wall.

vibrate against the back of the refrigerator or against

 

 

 

the wall.

 

 

 

Instructions Troubleshooting

Start the Icemaker

Set the icemaker feeler arm to the ON (down) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically if the icemaker feeler arm is in the ON (down) position.

NOTE: The icemaker may double-cycle when it first starts, causing some water spillage from the icemaker into the ice bucket. This is normal and should not happen again.

Tips

Customer Service

17

Image 17
Contents Models Manuel d’utilisationManual del propietario Congratulations You Are Now Part of the GE Family GE & You, a Service PartnershipCustomer Service Troubleshooting Tips Safety InstructionsOperating Instructions Installation Instructions Before You Throw Away Your Old Refrigerator or FreezerOperatingInstructions TroubleshootingTipsCustomerService How To Test Temperatures Control SettingsAbout the controls on the refrigerator Freezer ControlInstalling the Filter Cartridge InstallationInstructions Operating InstructionsAbout the water filter cartridge About the refrigerator shelves and binsOperating Instructions Installation Instructions Troubleshooting TipsRearranging the Shelves Spillproof ShelvesAbout the storage drawers About the additional featuresService SafetyAbout storage drawer removal About the automatic icemakerOperating Instructions InstallationInstructionsAbout the ice and water dispenser Cleaning the Outside Care and cleaning of the refrigeratorCleaning the Inside SafetyPreparing to Move TroubleshootingTips CustomerServiceBehind the Refrigerator Safety Instructions Operating Instructions InstallationReplacing the light bulbs Fresh Food Compartment-Upper LightSafetyInstructions Preparing to install the refrigeratorRefrigerator Location ClearancesPower drill Installing the water lineBefore You Begin What You Will NeedOperatingInstructions Shut Off the Main Water SupplyInstructions Tips Instructions InstallationOperating Tips InstallationInstructions OperatingInstructions Before you call for service…Problem Possible Causes What To Do Normal operating soundsCompartment too warm Fresh food or freezerFrost or ice crystals On frozen foodWater dispenser does Water in first glass isWater spurting from DispenserService Instructions Troubleshooting TipsSafety Instructions Operating Instructions Installation Hot air from bottomCustomer Service OperatingInstructions SafetyInstructionsGE Will Replace What GE Will Not CoverSpecial Notices Operating SpecificationsGeneral Installation/Operation/Maintenance Requirements Water Treatment Device We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Page Félicitations Désormais vous faites partie de la famille GE GE et vous, un partenariat de serviceSe débarrasser du CFC Conseils de dépannage ServiceLa clientèle Conseils de dépannage Service à la clientèleMesures de sécurité Réglage des commandes Les commandes du réfrigérateurConseils de dépannage Service à la clientèle Mesures de sécuritéService à la clientèle Installation DépannageLa cartouche du filtre à eau Les clayettes et les balconnets du réfrigérateurMesures de SécuritéLes bacs de rangement Installation Conseils de dépannageAutres caractéristiques Machine à glaçons automatique Enlèvement des bacs de rangementLe distributeur d’eau et de glaçons Service à la clientèle Conseils de dépannagePour utiliser le distributeur Bac à glaçonsNettoyage de l’intérieur Entretien et nettoyage du réfrigérateurNettoyage de l’extérieur Mesures de Service à la clientèle Conseils deConseils de dépannage Service à la clientèle Remplacement des ampoulesMesures de Compartiment réfrigérateur-lampe supérieureInstallation Emplacement du réfrigérateurPréparation DégagementsAvant de commencer Installation de la conduite d’eauMatériel nécessaire Perceuse électriqueDe dépannage Installez le robinet d’arrêtConseils Ouvrez le robinet et rincez le tuyauMesures Dépannage Service à la clientèleConseils de Service à la clientèle Conseils de Fonctionnement InstallationBruits de fonctionnement normaux Avant d’appeler un réparateur…Métallique une légère Causes possibles Correctifs Vibration ou bruitVibration est normale Le moteur fonctionne Pendant de longuesFonctionnement Mesures de sécurité Fonctionnement Installation Garantie DU Client Pour les besoins particuliers Aux États-Unis Numéros de serviceUn service satisfaisant Avis spéciaux Exigences générales d’installation/opération/entretienSpécifications d’opération Conseils de dépannage GE y usted, una asociación de servicio ¡Felicidades Ahora usted es parte de la familia GEAl consumidor SeguridadAntes de deshacerse de su viejo refrigerador o congelador Deshacerse del CFCInstalación Solucionar problemasServicio al consumidor Los controles del refrigerador Solucionar problemas Servicio al consumidorEl ajuste de los controles SeguridadEl cartucho del filtro de agua Instalación ProblemasLos entrepaños y recipientes del refrigerador SolucionarArreglar los entrepaños SeguridadEntrepaños a prueba de derramamientos Compartimientos de la puerta del congeladorGavetas para guardar Instalación Solucionar problemasCaracterísticas adicionales Sacar la gaveta para guardar Solucionar problemas ServicioEl dispositivo automático para hacer hielo Como sacar las gavetasServicio al consumidor Solucionar El dispensador de agua y de hieloPara usar el dispensador El recipiente de almacenamiento de hieloLimpiar el exterior Cuidado y limpieza del refrigeradorLimpiar el interior No lave partes plásticas del refrigerador en el lavaplatosEn caso de mudanza Servicio al consumidor SolucionarAtrás del refrigerador Reemplazo de bombillas Solucionar problemas Servicio al consumidorCompartimiento de alimentos frescos-Luz superior CongeladorUbicación del refrigerador Preparación para instalar el refrigeradorEspacios libres InstalaciónAntes de que empiece Instalación de la línea de aguaLo que se necesita Seguridad OperaciónHaga pasar el tubo de cobre y conéctelo a la llave de paso Corte el paso de agua del abastecimiento principalInstale la llave de paso Abra el agua en la llave de paso Conecte el tubo de cobre al refrigeradorEnchufe el cable eléctrico del refrigerador Arranque el dispositivo para hacer hieloSonidos normales de la operación Servicio al consumidor Solucionar problemasAntes de solicitar un servicio… Operación InstalaciónOperación SeguridadSabor/olor malo El agua tiene unEn algunos modelos El agua en el primer Vaso está tibiaSeguridad Operación Instalación Garantidor General Electric Company. Louisville, KY Durante GE reemplazaráLo que GE no cubrirá Números de servicio Avisos Especiales Especificaciones de OperaciónServicio al consumidor Solucionar problemasNotas Service Satisfaction Service Telephone Numbers

20-27 specifications

The GE 20-27 is a groundbreaking innovation in the realm of gas turbine technology, designed to meet the increasing energy demands with unparalleled efficiency and sustainability. This turbine model exemplifies the commitment of General Electric to deliver power solutions that not only drive economic growth but also align with environmental stewardship.

One of the main features of the GE 20-27 is its high efficiency in power generation. The turbine operates within a combined-cycle power plant environment, integrating both gas and steam turbines to maximize energy output from the same fuel input. This method significantly raises the overall efficiency, often exceeding 60%, which is a benchmark in modern power generation.

Technologically, the GE 20-27 employs advanced materials and components that enhance its durability and performance. The turbine blades are made from high-strength alloys and ceramic matrix composites, designed to withstand extreme temperatures and stresses. This focus on materials science not only improves the longevity of the turbine but also enhances its performance, allowing it to operate under a wide range of conditions.

The turbine incorporates cutting-edge aerodynamic design principles to increase airflow and optimize combustion efficiency. With its innovative combustion system, the GE 20-27 achieves lower emissions, contributing to cleaner power production. This aspect is particularly vital in a world increasingly concerned with climate change and pollution. The reduced nitrogen oxides (NOx) and carbon emissions make the GE 20-27 a viable option for utilities looking to enhance their environmental profile.

Additionally, the GE 20-27 features advanced digital capabilities through GE's Digital Wind Farm initiatives. This integration allows operators to monitor performance in real-time, utilizing data analytics to predict maintenance needs and optimize operational efficiency. The predictive maintenance capability transforms the way operators manage power generation, leading to reduced downtime and increased reliability.

Another characteristic worth noting is the flexibility of the GE 20-27 to run on various fuels, including natural gas and renewable sources. This versatility allows operators to adapt to changing market conditions and regulatory environments without significant investments in new infrastructure.

In conclusion, the GE 20-27 turbine model showcases a harmonious blend of efficiency, technology, and environmental responsibility. Through advanced design and materials, coupled with digital innovation, it stands as a hallmark of modern energy solutions, capable of addressing both the present and future needs of the global energy landscape.