Fresh food or freezer, Compartment too warm, Feels warm

Problem	Possible Causes	What To Do

Safety

Motor operates for long periods or cycles on and off frequently. (Modern refrigerators with more storage space and a larger freezer require more operating time. They start and stop often to maintain even temperatures.)

Normal when refrigerator	• Wait 24 hours for the refrigerator to completely
is first plugged in.	cool down.
Often occurs when large	• This is normal.
amounts of food are
placed in refrigerator.

Door left open.	• Check to see if package is holding door open.

Hot weather or frequent	• This is normal.
door openings.

Temperature controls	• See About the controls.
set at the coldest setting.

Grille and condenser	•See Care and cleaning.
need cleaning.

Instructions Operating

Fresh food or freezer	Temperature control not set	• See About the controls.
compartment too warm	cold enough.

	Warm weather or frequent	• Set the temperature control one step colder.
	door openings.	See About the controls.
	Door left open.	•Check to see if package is holding door open.

Frost or ice crystals	Door left open.	• Check to see if package is holding door open.
on frozen food
on frozen food	Too frequent or too long
(frost within package	Too frequent or too long
(frost within package	door openings.
is normal)	door openings.
is normal)

Divider between fresh	Automatic energy saver	•This helps prevent condensation on the outside.
food and freezer	system circulates warm
compartments	liquid around front edge
feels warm	of freezer compartment.

Automatic icemaker	Icemaker feeler arm in	• Move the feeler arm to the ON (down) position.
does not work	the STOP (up) position.	• Cubes may have fused to the side of the mold. Move
(on some models)		• Cubes may have fused to the side of the mold. Move
(on some models)		the feeler arm to the STOP (up) position then remove
		the feeler arm to the STOP (up) position then remove
		these cubes.

	Water supply turned off or	• See Installing the water line.
	not connected.
	Freezer compartment	• Wait 24 hours for the refrigerator to completely
	too warm.	cool down.
	Piled up cubes in the storage	•Level cubes by hand.
	bin cause the icemaker
	to shut off.

Ice cubes have	Ice storage bin needs cleaning.	• Empty and wash bin. Discard old cubes.
odor/taste
odor/taste	Food transmitting odor/taste	• Wrap foods well.
	Food transmitting odor/taste	• Wrap foods well.
	to ice cubes.

	Interior of refrigerator	•See Care and cleaning.
	needs cleaning.

Small or hollow cubes	Water filter clogged.	•Replace filter cartridge with new cartridge or with plug.

Slow ice cube freezing	Door left open.	• Check to see if package is holding door open.

	Temperature control not set	•See About the controls.
	cold enough.

Door not closing	Door gasket on hinge side	•Apply petroleum jelly on face of gasket.
properly	sticking or folding over.

Orange glow in	Defrost heater is on.	• This is normal.
the freezer		19
		19

Instructions Installation Instructions Troubleshooting Tips

Customer Service

20-27 specifications

The GE 20-27 is a groundbreaking innovation in the realm of gas turbine technology, designed to meet the increasing energy demands with unparalleled efficiency and sustainability. This turbine model exemplifies the commitment of General Electric to deliver power solutions that not only drive economic growth but also align with environmental stewardship.

One of the main features of the GE 20-27 is its high efficiency in power generation. The turbine operates within a combined-cycle power plant environment, integrating both gas and steam turbines to maximize energy output from the same fuel input. This method significantly raises the overall efficiency, often exceeding 60%, which is a benchmark in modern power generation.

Technologically, the GE 20-27 employs advanced materials and components that enhance its durability and performance. The turbine blades are made from high-strength alloys and ceramic matrix composites, designed to withstand extreme temperatures and stresses. This focus on materials science not only improves the longevity of the turbine but also enhances its performance, allowing it to operate under a wide range of conditions.

The turbine incorporates cutting-edge aerodynamic design principles to increase airflow and optimize combustion efficiency. With its innovative combustion system, the GE 20-27 achieves lower emissions, contributing to cleaner power production. This aspect is particularly vital in a world increasingly concerned with climate change and pollution. The reduced nitrogen oxides (NOx) and carbon emissions make the GE 20-27 a viable option for utilities looking to enhance their environmental profile.

Additionally, the GE 20-27 features advanced digital capabilities through GE's Digital Wind Farm initiatives. This integration allows operators to monitor performance in real-time, utilizing data analytics to predict maintenance needs and optimize operational efficiency. The predictive maintenance capability transforms the way operators manage power generation, leading to reduced downtime and increased reliability.

Another characteristic worth noting is the flexibility of the GE 20-27 to run on various fuels, including natural gas and renewable sources. This versatility allows operators to adapt to changing market conditions and regulatory environments without significant investments in new infrastructure.

In conclusion, the GE 20-27 turbine model showcases a harmonious blend of efficiency, technology, and environmental responsibility. Through advanced design and materials, coupled with digital innovation, it stands as a hallmark of modern energy solutions, capable of addressing both the present and future needs of the global energy landscape.

Problem

Safety

Instructions Operating