Wall Mount Installation

Note: see below if cabinet installation is preferred

3.After the hood installation height has been determined draw a horizontal line at a distance above the cooktop equal to the desired hood installation height plus 7- 1/2”. See also Figure 4a.

4.Find the centerline of the cooktop. Draw a vertical line along this centerline up to the hori- zontal line drawn in step 1 and draw a vertical line right and left at a distance of12-5/8” to determine the mounting locationof the mounting hooks shipped with the hood.

5.Fit two mounting hooks on the wall to hang the hood through the provided slots (2 wall anchors + 2 hooks + 2 screws 5x35).

6.Run 10” Duct, long enough to reach the transition once the hood has been installed plus 1 1/2” inch to connect ductwork. Fix Duct to transition with screws and seal withtape.

7.Remove 1 of 2 knockouts and install 1/2” conduit connector in j-box.

8.Hang the hood and adjust its position through the screws on the hooks.

9.Fix the hood to 4 additional point, 2 on upperside, 2 on lower side (use 4 wall anchors

+4washers + 4 screws 5x35.

Cabinet Installation:

Note: See above if wall mount installation is preferred

Note: Distances on Table. 3.3

Find the centerline of the cabinet bottom. Draw a line along this centerline from rear to front of the cabinet. See also Figure 4b.

4.Draw two lines, one at a K distance from thewall, the other one at a Z distance from theprevious line. Mark 4 points, two along each line at a distance of half W from the center line, to determine the screw locations.

5.Fit 4 screws on cabinet bottom do not tighten completely but leave a space of about 1/2” from cabinet bottom surface and head screws.

6.Run 10” Duct, long enough to reach the transition once the hood has been installed plus1 1/2” inch for connect ductwork.

7.Remove 1 of 2 knockouts and install 1/2”conduit connector in j-box.

8.Hang the hood on screws through side slots provided on hood top.Tighten the four screws. Note: If possible fix the hood on the wall at 4 additional point (2 on upper side, 2 on lowerside).

9.From the inside of the cabinet attach the transition on upper outlet.

HOO D W IDTH	DIM. "W "	DIM. "K "		DIM. "Z"
30"	29 - 1/8"	2	- 1/2"	7	- 1/16"
36"	35 - 1/16"	2	- 1/2"	7	- 1/16"
48"	47 - 1/16"	2 - 1/2"		7 - 1/16"

Table 3

Figure 4a	Side slot x 4
	Center Hole

Figure 4b

HPWB36, HPWB30, HPWB48 specifications

The Thermador HPWB48, HPWB30, and HPWB36 are premium wall hoods that redefine kitchen ventilation, combining performance and artistry to enhance your cooking experience. Each model brings its unique dimensions while sharing remarkable features and advanced technologies designed for discerning home chefs.

The HPWB48, with its 48-inch width, is perfect for spacious kitchens and offers powerful ventilation capabilities to handle even the most intense cooking sessions. The HPWB30 and HPWB36 are ideal for more compact spaces, measuring 30 inches and 36 inches, respectively. Despite their varying sizes, all three models exude the same sophisticated design and cutting-edge functionality.

One of the standout features of these hoods is the powerful ventilation system, which includes a heavy-duty motor that ensures efficient removal of smoke, odors, and grease. The hoods offer multiple fan speeds, allowing users to adjust the airflow according to their cooking needs, providing the right balance between noise levels and performance.

Thermador's advanced Ducted and Ductless options give homeowners flexibility in installation, catering to different kitchen layouts. The hoods are engineered to be quiet while operating, with a sound-absorbing design that minimizes noise levels, thus making for a more pleasant cooking environment.

A key technology that sets these models apart is the exclusive Star-Sapphire Lighting, which provides brilliant illumination over the cooking surface. This feature not only enhances visibility but also adds a sophisticated touch to the kitchen ambiance. In addition, these hoods are equipped with a stainless steel baffle filter system that is both effective and easy to clean, ensuring longevity and optimal performance.

The hoods also integrate seamlessly with Theramador's other kitchen appliances, thanks to their elegant design and modern aesthetics. The smooth stainless-steel surface is not only beautiful but also resistant to fingerprints and stains, ensuring that the hoods remain easy to maintain.

Furthermore, the Thermador HPWB series is equipped with convenient controls that allow for easy operation, including a remote control option for added convenience. Whether you are simmering, sautéing, or grilling, the Thermador HPWB48, HPWB30, and HPWB36 hoods offer a combination of power, style, and functionality that truly enhances the culinary experience.