Thermador HPWB30, HPWB48, HPWB36 installation manual Electrical requirements

Page 4

IMPORTANT SAFETY INSTRUCTIONS

Read All Instructions Before Using the Appliance.

READ AND SAVE THESE INSTRUCTIONS

Electrical requirements

IMPORTANT

Observe all governing codes and ordinances.

It is the customer’s responsibility:

To contact a qualified electrical installer.

To assure that the electrical installation is adequat e and in conformance with National Electrical Code,

ANSI/NFPA 70 — latest edition*, or CSA

Standards

C22.1-94, Canadian Electrical Code, Part

1 and

C22.2

No.0-M91 - latest edition** and all local

codes

and ordinances.

 

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure range hood is properly grounded.

Do not have a fuse in the neutral or ground circuit.

IMPORTANT

Save Installation Instructions for electrical inspector’s use.

The range hood must be connected with copper wire only.

The range hood should be connected directly to the fused disconnect (or circuit breaker) box through metal electrical conduit.

Wire sizes must conform to the requirements of the National Electrical Code ANSI/NFPA 70 —latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code Part 1 and C22.2 No. 0-M91 - latest edition** and all local codes and ordinances.

A U.L. - or C.S.A.- listed conduit connector must be provided at each end of the power supply conduit (at the range hood and at the junction box).

Copies of the standards listed may be obtained from:

*National Fire Protection Association Batterymarch Park Quincy, Massachusetts 02269

**CSA International 8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575

4

Image 4
Contents Installation Manual Page Important Safety Instructions Read and Save These InstructionsElectrical requirements Installing the Hood Typical installation Choose vent optionsVentilator performance calculation Transition Screws Wall Mount Installation For both installation method Importantes Instructions DE Sécurité Veuillez Lire ET Conservez Soigneusement CES InstructionsSpécifications pour l’installation élec- trique Importantes Instructions DE SecuritéAccessoires optionnels Etapes de l’installationInstallation typique Exemples de possibles types d’extraction/evacuationAjustage/dimensions Tabla 1. Calcul de performances de ventilationVisses Installation SUR MUR Nota euillez consultez les distance sur la tableDernière étape d’installation FiguraAdvertencia Instrucciones Importantes DE SeguridadInstrucciones DE Seguridad Importantes Requerimientos eléctricosAccesorios opcionales Pasos de instalaciónEjemplos de posible intalación Tabla 1. Cálculo de funcionamiento de Ventilación Transición Tornillos Instalación en gabinete Instalación a paredNota vea abajo si se prefiere instalación en gabinete Para ambos métodos de instalación Figura

HPWB36, HPWB30, HPWB48 specifications

The Thermador HPWB48, HPWB30, and HPWB36 are premium wall hoods that redefine kitchen ventilation, combining performance and artistry to enhance your cooking experience. Each model brings its unique dimensions while sharing remarkable features and advanced technologies designed for discerning home chefs.

The HPWB48, with its 48-inch width, is perfect for spacious kitchens and offers powerful ventilation capabilities to handle even the most intense cooking sessions. The HPWB30 and HPWB36 are ideal for more compact spaces, measuring 30 inches and 36 inches, respectively. Despite their varying sizes, all three models exude the same sophisticated design and cutting-edge functionality.

One of the standout features of these hoods is the powerful ventilation system, which includes a heavy-duty motor that ensures efficient removal of smoke, odors, and grease. The hoods offer multiple fan speeds, allowing users to adjust the airflow according to their cooking needs, providing the right balance between noise levels and performance.

Thermador's advanced Ducted and Ductless options give homeowners flexibility in installation, catering to different kitchen layouts. The hoods are engineered to be quiet while operating, with a sound-absorbing design that minimizes noise levels, thus making for a more pleasant cooking environment.

A key technology that sets these models apart is the exclusive Star-Sapphire Lighting, which provides brilliant illumination over the cooking surface. This feature not only enhances visibility but also adds a sophisticated touch to the kitchen ambiance. In addition, these hoods are equipped with a stainless steel baffle filter system that is both effective and easy to clean, ensuring longevity and optimal performance.

The hoods also integrate seamlessly with Theramador's other kitchen appliances, thanks to their elegant design and modern aesthetics. The smooth stainless-steel surface is not only beautiful but also resistant to fingerprints and stains, ensuring that the hoods remain easy to maintain.

Furthermore, the Thermador HPWB series is equipped with convenient controls that allow for easy operation, including a remote control option for added convenience. Whether you are simmering, sautéing, or grilling, the Thermador HPWB48, HPWB30, and HPWB36 hoods offer a combination of power, style, and functionality that truly enhances the culinary experience.