Thermador HPWB30, HPWB48, HPWB36 installation manual For both installation method

Page 10

Fix Duct to transition and seal with tape.

For both installation method:

10.Wiring the HOOD:

WARNING:

To Avoid Electrical Shock Hazard Turn off power at the service panel before wiring this unit.

120 VAC, 15 or 20 Amp circuit required.

ELECTRICAL GROUNDING INSTRUCTIONS THIS APPLIANCE IS FITTED WITH AN ELECTRICAL JUNCTION BOX WITH 3 WIRES, ONE OF WHICH (GREEN/YELLOW) SERVES TO GROUND THE APPLIANCE.

WARNING:

TO PROTECT

YOU AGAINST ELECTRIC

SHOCK,

THE GREEN AND YELLOW WIRE

MUST

BE

CONNECTED TO THE GROUNDING

WIRE

IN

YOUR HOME

ELECTRICAL SYSTEM, AND IT MUST

UNDER NO CIRCUNSTANCES BE CUT OR REMOVED.

Failure to do so can result in death or electrical shock.

Remove the j-box cover as shown in Figure 5.

If not already done, install 1/2” conduit connector in j-box.

Run black, white, and green wires (#14 AWG) according to the National Electrical Code or CSA Standards and local codes and ordinances .

Connect black, white, and green wires from power supply to black, white, and green/ yellow wires in j-box respectively.

Close j-box cover.

Final installation steps

11.Install grease filters, lamps and drip trays as described in the Care & Use section of this manual .

Note: Lamps are not supplied, use ONLY 120 Volt, 50 Watt (maximum) 50° halogen light made for a GU10 base, suitable for use in open luminarie.

Turn power on at service panel.

From control panel

Figure 5

10

Image 10
Contents Installation Manual Page Important Safety Instructions Read and Save These InstructionsElectrical requirements Installing the Hood Typical installation Choose vent optionsVentilator performance calculation Transition Screws Wall Mount Installation For both installation method Importantes Instructions DE Sécurité Veuillez Lire ET Conservez Soigneusement CES InstructionsSpécifications pour l’installation élec- trique Importantes Instructions DE SecuritéAccessoires optionnels Etapes de l’installationInstallation typique Exemples de possibles types d’extraction/evacuationAjustage/dimensions Tabla 1. Calcul de performances de ventilationVisses Installation SUR MUR Nota euillez consultez les distance sur la tableDernière étape d’installation FiguraAdvertencia Instrucciones Importantes DE SeguridadInstrucciones DE Seguridad Importantes Requerimientos eléctricosAccesorios opcionales Pasos de instalaciónEjemplos de posible intalación Tabla 1. Cálculo de funcionamiento de Ventilación Transición Tornillos Instalación en gabinete Instalación a paredNota vea abajo si se prefiere instalación en gabinete Para ambos métodos de instalación Figura

HPWB36, HPWB30, HPWB48 specifications

The Thermador HPWB48, HPWB30, and HPWB36 are premium wall hoods that redefine kitchen ventilation, combining performance and artistry to enhance your cooking experience. Each model brings its unique dimensions while sharing remarkable features and advanced technologies designed for discerning home chefs.

The HPWB48, with its 48-inch width, is perfect for spacious kitchens and offers powerful ventilation capabilities to handle even the most intense cooking sessions. The HPWB30 and HPWB36 are ideal for more compact spaces, measuring 30 inches and 36 inches, respectively. Despite their varying sizes, all three models exude the same sophisticated design and cutting-edge functionality.

One of the standout features of these hoods is the powerful ventilation system, which includes a heavy-duty motor that ensures efficient removal of smoke, odors, and grease. The hoods offer multiple fan speeds, allowing users to adjust the airflow according to their cooking needs, providing the right balance between noise levels and performance.

Thermador's advanced Ducted and Ductless options give homeowners flexibility in installation, catering to different kitchen layouts. The hoods are engineered to be quiet while operating, with a sound-absorbing design that minimizes noise levels, thus making for a more pleasant cooking environment.

A key technology that sets these models apart is the exclusive Star-Sapphire Lighting, which provides brilliant illumination over the cooking surface. This feature not only enhances visibility but also adds a sophisticated touch to the kitchen ambiance. In addition, these hoods are equipped with a stainless steel baffle filter system that is both effective and easy to clean, ensuring longevity and optimal performance.

The hoods also integrate seamlessly with Theramador's other kitchen appliances, thanks to their elegant design and modern aesthetics. The smooth stainless-steel surface is not only beautiful but also resistant to fingerprints and stains, ensuring that the hoods remain easy to maintain.

Furthermore, the Thermador HPWB series is equipped with convenient controls that allow for easy operation, including a remote control option for added convenience. Whether you are simmering, sautéing, or grilling, the Thermador HPWB48, HPWB30, and HPWB36 hoods offer a combination of power, style, and functionality that truly enhances the culinary experience.