Cleveland Range OGS-6.20, OGB-6.20 manual Cleveland Range OGB 6.20/10.10 Sequence of Operations

Page 73

CLEVELAND RANGE OGB 6.20/10.10

SEQUENCE OF OPERATIONS

When using these instructions refer to the OGB 6.20/10.10 wiring schematic.

1When 120 VAC is applied to the combi, it is sent through the line filter (Z1) to the Power Control Switch (S1).

2When the Power Control Switch (S1) is closed a The red light in the switch is energized.

b 120 VAC is sent through the 7 amp fuse (F10) to terminal 1 of connector X11 on the Motor Drive (U10)

c 120vac is sent through the 2 amp fuse (F1.1) to

•The primary of the Hot Air 24v Transformer (T1)

◊24 VAC is sent from the secondary of the transformer to the Hot air Burner Control (N20)

•The primary of the Steam 24v Transformer (T2)

◊24 VAC is sent from the secondary of the transformer to the Steam Burner Control (N21)

•To terminal 12 of connector X1 on the Hot Air Burner Control (N20)

•To terminal 12 of connector X1 on the Steam Burner Control (N21)

•The 12 VDC Power Supply (G1)

◊12 VDC is sent to terminals 1 and 2 of connector X20 on the Gas Board (A20)

◊12 VDC is sent to terminal 3 and 4 of connector X10 on the Control Board (A10)

•To terminal 2 of connector X1 on the Hot Air Power Burner and Fan Control (U20)

•To terminal 2 of connector X1 on the Steam Power Burner and Fan Control (U21)

•To terminal 1 of connector X12 on the Control Board (A10)

dWith 120 VAC to the Control Board (A10) The Operation Board (A11) is energized

•An alarm will sound for one second

•All the LED’s and the display will energize one at a time.

•“STARTING” will be displayed for 3 seconds

•“Please wait” will be displayed

•The international model number will be displayed

•The time and date will be displayed and this will continue until the on/off switch is depressed.

3When the ON/OFF is depressed with the combi in the steam mode

a After a date change (the first time the combi is turned on) the display will ask “Generator Flush?”. If no answer is given in 10 seconds or a yes is indicated the flush will begin.

66

Image 73

Contents Service & Parts Manual Table of Contents Service Parts Maintenance For the Installer Cleveland Statement of Policies General Information about Combis Installation Instructions Installation of the Combi General Instructions Page Cleveland Range, LLC Advanced Closed System offers the following advantages GAS Fired Boilerless TOP View Model χ OGB-6.20 Saves energy Model χ OGS-6.20 Optional Plate Rack holds 42 plates Control Panel Basic Operation Control Panel Detail View Function Indicators AT the END of the DAY or Shift Avoid scratching the oven chamber or engaging frame Page Semi-Automatic Cleaning of the Oven Chamber Page CONVOClean Automatic Cleaning System optional Page Descale Steam Generator General Safety for Descaling Page Light Gasket C6015020 Condensate Box o-ring C6015000 GAS Generator W CleaningQTY Part N0 Description GAS INJ W Cleaning ASSY, Control PANEL, SPRITZER, with Picto GAS GEN W Cleaning ASSEMBLY/WELDMENT, Intermediate TOP, 6.20/10.20 Spray Handle Shut Off Valve C6014003 ASSEMBLY, Intake PLATE, Gas OGB 6.20 & 10.10 Models Component Panel ASSEMBLY, GASGAS Panel ASSEMBLY, ModelsOGS 6.20 & 10.10 Models ALL Models ASSEMBLY, Control PANEL, with PictoBASE, GAS Injector With Cleaning OGS 10.10 Models BASE, GAS Injector No Cleaning OGS 10.10 Models BASE, GAS Generator With Cleaning OGB 6.20 Models BASE, GAS GENERATOR, no Cleaning OGB 6.20 Models OGS 6.20 Models BASE, GAS Injector With CleaningPage ASSEMBLY, Water Hose SYSTEM, Condenser ALL GAS 10.10 Models ASSEMBLY, Water ValveModels ASSEMBLY, Water VALVE, INJECTOR, GAS OEB & OGB 6.20 Models ASSEMBLY, Water SUPPLY, Generator W/CLEANING SystemALL GAS 6.20 Models Push Button SWITCH, INJ, CHANGE-OVER Contact OGB 6.20 Models ASSEMBLY, Steam GENERATOR, GASALL GAS Models PUMP, Steam GENERATOR, GASVenturi 40 KW ASSEMBLY, Burner INSERT, Steam GENERATOR, NAT GASBurner INSERT, HL, PRE-MOUNTED Burner INSERT, HL, PRE-MOUNTED, 6.10/6.20 ASSEMBLY, Burner INSERT, AIR, LP & NAT GASOES 6.20 & 10.10 Models Door 6.20 CompleteALL 6.20 &10.10 Models Sliding PLATE, CompleteALL 6.20 & 10.10 Models Exterior Sheeting 10 & 10.10 Models STAND, ASSEMBLY, Closed BasePage Page Page Page 20 on 6.20 or 10 on 6.10 or ASSEMBLY, Stacking KIT, GAS ModelsPIPE, Steam EXHAUST, ELECTRIC, Stacking KIT ASSEMBLY, Stacking KIT, Electric ModelsCleveland Range OGB 6.20/10.10 Sequence of Operations Page Page Page Page Page Page Page Cleveland RANGE, LLC Wiring Diagram X12GND X23 X10 N20 N21 IVE Ladderdiagram Ladder DI RAM Cleveland Range OGS 6.20/10.10 Sequence of Operations Page Page Page Page Page OGS 6.20/10.10 Preliminary X39 A12 Preliminary Ladder Diagram Ladder