1010 GAS INJ W CLEANING
C6012001
ITEM | QTY | PART N0. | DESCRIPTION |
1 | 1 | C2115483 | ASSEMBLY, PANEL, RIGHT SIDE, 10.10 |
2 | 1 | C2114824 | ASSEMBLY/WELDMENT, INTERMEDIATE TOP, 6.10/10.10 |
3 | 1 | C2115490 | ASSEMBLY, CORNER, FRONT, RIGHT, 10.10/10.20 |
4 | 1 | C2114452 | WELDMENT, FACE PLATE, LOWER, 6.10/10.10 |
5 | 1 | C2114719 | WELDMENT, REINFORCEMENT, DOOR LATCH, 10.10/10.20 |
6 | 1 | C2114688 | ASSEMBLY, SLIDE BAR, DISAPPEARING DOOR, 6.10/10.10 |
7 | 1 | C2114743 | ASSEMBLY, PANEL, REAR, ELECTRIC & GAS INJ, 10.10 |
8 | 1 | C2114783 | ASSEMBLY, PANEL, LEFT SIDE, 10.10 |
9 | 1 | C2115375 | WELDMENT, CHANNEL, FRONT, 6.10/10.10 |
10 | 1 | C2115443 | FRONT PIECE, |
11 | 1 | C6010001 | WHEEL, BLOWER, 350mm OD X 110mm WIDE, TYPE 304 SST, |
|
|
| 6.20 & 10.10 COMBI |
12 | 1 | C2114292 | AIR OUTLET CONECTING PIECE 20.20 GEN. 6.20/10.10/20.20 INJ. |
13 | 1 | C22141901 | PAN RACK,LEFT, ELECTROPOLISHED, 10.10 |
14 | 1 | C2214191 | WELDMENT, PAN RACK, RIGHT, 10.10 |
15 | 1 | ASSY, CONTROL PANEL, SPRITZER, WITH PICTO | |
16 | 1 | C2214153 | ASSEMBLY, INTAKE PANEL INJ 10.10 |
17 | 1 | C2614841 | CAVITY LIGHT |
18 | 1 | C7011002 | DOOR SEAL, 10.10 |
19 | 1 | C2614802 | ASSEMBLY, SLIDING PLATE VST 10.10/10.20 |
20 | 1 | C2013006 | WELDMENT, HINGE CARRIER, UPPER, DOOR |
21 | 1 | C2614740 | ASSEMBLY, GUIDE CLIP, VST, COUNTERTOP MODEL |
22 | 1 | C26142661 | ASSEMBLY, CONTROLLER |
23 | 1 | C2614263 | ASSEMBLY, CORE TEMPERATURE SENSOR |
24 | 1 | C2514352 | ASSEMBLY, DOOR 10.10 |
25 | 1 | C2216070 | ASSEMBLED, BLOCK |
26 | 1 | C2608962 | ASSEMBLY, NEGATIVE PRESSURE SAFETY VENT |
27 | 1 | C22160801 | ASSEMBLY, HAND SHOWER, 10.10, 6.10 |
28 | 1 | C2114731 | FACEPLATE, UPPER X.10 |
29 | 1 | C2114634 | CORNER, WELDED, REAR, LEFT, 10.10/10.20 |
30 | 1 | 111544 | WASHER, BELLEVILLE, M10, SMOOTH, TYPE 301 SST, |
|
|
| 10.21mm ID X 24mm OD X 1.85mm THICK |
31 | 1 | 111543 | RING, RETAINING, EXTERNAL, 1/4", STAINLESS STEEL, |
|
|
| WALDES |
32 | 1 | 111542 | WASHER, BELLEVILLE, M8, SERRATED BOTH SIDES, SST, |
|
|
| 8.4mm ID X 13mm OD X 0.8mm THICK |
33 | 1 | 111540 | NUT, HEX, M10 X 1.5 (DIN 934), STAINLESS STEEL |
34 | 4 | C8006060 | SCHNORR LOCK WASHER |
35 | 4 | C8005050 | WASHER, 8.4 A2 DIN 125 |
36 | 4 | C8004057 | NUT, HEX, M8 A4 |
37 | 4 | C6015213 | SPACER, MOTOR 1.299 (FAN DISTANCE 2.008in) |
38 | 1 | C6015210 | SHIM, WEARING MOTOR SHAFT SEAL |
39 | 1 | C6015206 | BUSHING, LABYRINTH |
40 | 1 | C6015050 | SPRING, MOTOR SHAFT SEAL |
41 | 1 | C2114140 | MOTOR MOUNTING PLATE |
42 | 2 | C6015021 | SEALING RING, MOTOR SHAFT, VITON, COMBI |
43 | 1 | 111541 | NUT, HEX, |
44 | 1 | C6012009 | GUIDE STRIP, LOWER VST |
45 | 4 | C6012011 | DOORSTOPPER VA VST |
46 | 1 | C2114817 | COVER PANEL VST 10.10/10.20 |
47 | 1 | C6012008 | SUPPORT STRIP RST |
48 | 1 | 19993 | SWITCH, ROCKER, DPDT, ON/OFF 15A, 125V |
49 | 1 | C2017001 | SAFETY RAIL VST 6.10/10.10 |
50 | 1 | C6005427 | DIAPHRAGM GROMMET ø 83 (DG60) FOR VAC. REG. VALVE |
51 | 1 | C6005048 | DIAPHRAGM GROMMET ø 60 mm (DG 48) |
52 | 1 | C2414125 | FINAL ASSEMBLY, CONDENSER |
53 | 1 | C50180211 | MOTOR W/STUD, ALL VOLTAGES, |
|
|
| GAS COMBI |
54 | 1 | C2114535 | BASE, GAS, INJ, 10.10 W/CLEANING |
55 | 1 | C2215041 | WELDMENT, INNER HOUSING, GAS, INJ, 10.10, REI |
56 | 1 | C2614862 | BURNER INSERT,10.10/20.10, HOT AIR, NAT GAS |
57 | 1 | C2010000 | WELDMENT, HEAT EXCHANGER, GAS, 10.10/20.10 |
58 | 1 | 300488 | ASSY., COMP. PANEL, OGS 6.20/10.10 |
59 | 1 | C2115453 | ASSEMBLY, TOP PANEL, GAS INJ, 10.10 |
60 | 1 | C2018000 | DRIP TRAY, 10.10 |
61 | 1 | C2016009 | COVER, BYPASS |
62 | 1 | C2216796 | ASSEMBLY, COVER, DEHUMIDIFYING GUTTER |
31
C3216313 B
0706