Bally Refrigerated Boxes Refrigerators/Freezers/Warmers manual Interior REACH-IN Accessories

Page 20

INTERIOR REACH-IN ACCESSORIES

The standard interior accessory package that is supplied from the factory with your new value line and designer line reach-in consists of standard pilaster strips with pilaster clips (four (4)clips per shelf), three (3) epoxy coated shelves per section, and four (4) epoxy coated shelves per section on glass door models only.

SHELVING INSTALLATION

Pilaster strips which support the shelving are secured to the cabinet walls with special pilaster screws which allow the strips to be readily removed for cleaning without the use of tools. Shelf clips are easily installed by inserting them into the pilasters at the desired shelf location and shelf installation is as simple as placing the shelf on the clips as shown in figure 11. The standard pilaster and clip are shown in figure 11a, and the optional heavy-duty pilaster and clip are shown in figure 11b.

Important Note: When loading shelves with food product, allow space between rows of product for proper air circulation, and do not load product to block back wall (leave at least 2" of air space between product and back wall).

FIGURE 11a

STANDARD PILASTER

- 18 -

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Reach-In and Roll-In Operators Manual Table of Contents Receiving Your NEW Model General Information and Important Operating FactsVentilation Installation and Location ClearancesUncrating Your NEW Model Minimum Clearance Dimensions Floor LoadsMounting ROLL-IN Models in Place and Leveling Installing Legs and Leveling REACH-IN ModelsLEG Installation Installing Casters and Leveling REACH-IN Models Casters Must be Tight to Cabinet BottomInstalling Condensate Evaporator Condensate Evaporator InstallationRemoval of Doors and Door Adjustment Door Adjustment and RemovalInitial Cleaning Procedure Removal of GrillSpecial Voltage Connections START-UP Procedure Electrical ConnectionsVOLT, 60 HZ, 1 Phase Connection START-UP Checklist Remote ApplicationsOperation Thermometer CalibrationCalibration Check Dial ThermometerThermometer Calibration Refrigerator System and Adjustment Refrigerator and Freezer ThermostatFreezer System and Adjustment Defrost OperationDefrost Timer Setting Warmer System and Adjustment Evaporator Assembly LOW-PROFILE,CEILING-MOUNT Evaporator AssemblyPLUG-TYPE,TOP-MOUNT Evaporator Assembly PLUG-TYPE,TOP-MOUNT Evaporator AssemblyInterior REACH-IN Accessories Standard PilasterOptional Interior Accessories Optional HEAVY-DUTY Pilaster Optional Angle PAN SlidesMaintenance Periodic Cleaning Procedure Safety PrecautionsGeneral Preventative Maintenance Sliding and Hinged GlassParts and Service Condensing unit will Problem Probable Cause Correction But short cycles onProduct zone Wiring Diagrams Page Page Page Page Page Page

Refrigerators/Freezers/Warmers specifications

Bally Refrigerated Boxes is a prominent name in the realm of commercial refrigeration, specializing in high-quality refrigerators, freezers, and warmers designed for a variety of food service environments. With a commitment to innovation and efficiency, Bally’s products cater to the needs of restaurants, catering businesses, and food retailers, ensuring that perishable goods are stored at optimal temperatures while maintaining quality.

One of the standout features of Bally Refrigerated Boxes is their versatility. Their product line includes reach-in refrigerators and freezers, undercounter units, and pass-through models, allowing businesses to choose the best fit for their kitchen layout and operational requirements. This versatility is complemented by a variety of sizes and configurations, enabling users to maximize storage space while keeping products accessible.

Energy efficiency is a central focus of Bally’s design philosophy. Many models are equipped with advanced insulation technology and energy-efficient compressors, which significantly reduce energy consumption without compromising performance. This not only leads to lower operational costs but also aligns with modern sustainability goals, helping businesses minimize their environmental footprint.

Bally Refrigerated Boxes also incorporate state-of-the-art temperature control systems. These units often feature digital temperature displays, which allow for precise monitoring and easy adjustments. Some models are equipped with smart technology that can send alerts in case of temperature fluctuations, ensuring that products are always kept within safe limits.

Durability is another hallmark of Bally products. Constructed from high-quality stainless steel, both the interiors and exteriors are designed to withstand the rigorous demands of commercial kitchens. This material not only enhances the longevity of the units but also makes them easy to clean, promoting hygiene in food storage environments.

Moreover, user-friendly designs are a priority, with thoughtfully arranged interior shelving options that cater to various product sizes and shapes. The user experience is enhanced with features such as LED lighting, which provides excellent visibility while being energy-efficient.

In conclusion, Bally Refrigerated Boxes' refrigerators, freezers, and warmers are built to deliver on performance, efficiency, and durability. With a wide range of options tailored to commercial needs, their innovative technology and design characteristics make them a reliable choice for any food service operation. Professionals in the industry can trust Bally to not only meet but exceed their refrigeration and warming requirements, ensuring that food safety and quality remain paramount.
Top Page Image Contents