Bally Refrigerated Boxes Refrigerators/Freezers/Warmers manual Problem Probable Cause Correction

Page 26

PROBLEM

PROBABLE CAUSE

CORRECTION

 

Condensing unit runs,

1.OVERLOAD PROTECTOR.

1.SEE PROBLEM # 3.

 

 

but short cycles on:

2.THERMOSTAT.

2.DIFFERENTIAL MUST BE WIDENED.

 

 

3.HIGH PRESSURE CUT-OUT DUE TO:

3.

 

 

 

 

(a) INSUFFICIENT AIR SUPPLY.

(a) CHECK AIR SUPPLY TO CONDENSER.

 

 

(B) OVERCHARGE.

(b) EVACUATE AND RE-CHARGE.

 

 

(c) AIR IN SYSTEM.

(c) EVACUATE AND RE-CHARGE.

 

 

4.LOW PRESSURE CUT-OUT DUE TO:

4.

 

 

 

 

(a) VALVE LEAK.

(a) REPLACE, EVACUATE AND RE-

 

 

 

CHARGE.

 

 

 

 

(b) UNDERCHARGE.

(b) EVACUATE AND RE-CHARGE.

 

 

(c) RESTRICTION IN EXPANSION DEVICE.

(c) REPLACE EXPANSION DEVICE.

 

 

 

 

 

Condensing unit runs,

1.SHORTAGE OF REFRIGERANT.

1.FIX LEAK,EVACUATE AND RE-CHARGE.

 

but for prolonged

2.CONTROL CONTACTS STUCK CLOSED.

2.CLEAN CONTACTS OR REPLACE

 

periods or continuous.

3.EXCESSIVE HEAT LOAD PLACED INTO

CONTROL.

 

 

 

 

3.ALLOW UNIT SUFFICIENT TIME FOR

 

 

CABINET.

REMOVAL OF LATENT HEAT.

 

 

 

4.PROLONGED OR TOO FREQUENT DOOR

4.PLAN OR ORGANIZE SCHEDULE TO

 

 

OPENINGS.

CORRECT CONDITION.

 

 

 

5.EVAPORATOR COIL ICED.

5.DEFROST EVAPORATOR COIL.

 

 

 

6.RESTRICTION IN REFRIGERATION SYSTEM.

6.DETERMINE LOCATION AND REMOVE.

 

 

7.DIRTY CONDENSER.

7.CLEAN CONDENSER COIL.

 

 

 

8.FILTER DRIER CLOGGED.

8.REPLACE,EVACUATE AND RE-CHARGE.

 

 

 

 

 

Start capacitor open,

1.RELAY CONTACT NOT OPENING PROPERLY.

1.CLEAN CONTACTS OR REPLACE RELAY.

 

shorted or blown.

2.PROLONGED OPERATION ON START CYCLE:

2.

 

 

 

 

(a) LOW VOLTAGE TO UNIT.

(a) DETERMINE REASON AND CORRECT.

 

 

(b) IMPROPER RELAY.

(b) REPLACE WITH CORRECT RELAY.

 

 

(c) STARTING LOAD TOO HIGH.

(c) CORRECT BY USING PUMP DOWN.

 

 

3.EXCESSIVE SHORT CYCLING.

3.DETERMINE REASON FOR

SHORT

 

 

 

CYCLE,

(SEE PROBLEM

#5) AND

 

 

4.IMPROPER CAPACITOR.

CORRECT.

 

 

 

 

4.DETERMINE CORRECT SIZE AND

 

 

 

REPLACE.

 

 

 

Run capacitor open,

1.IMPROPER CAPACITOR.

1.CHECK SIZE AND REPLACE.

 

 

shorted or blown.

2.EXCESSIVELY HIGH LINE VOLTAGE, OVER

2.DETERMINE REASON AND CORRECT.

 

 

110% OF RATED MAXIMUM.

 

 

 

 

 

 

 

 

 

Relay defective or

1.INCORRECT RELAY.

1.CHECK RELAY AND REPLACE.

 

 

blown out.

2.INCORRECT MOUNTING ANGLE.

2.REMOUNT RELAY IN CORRECT

 

 

 

POSITION.

 

 

 

 

3.VOLTAGE TOO LOW OR TOO HIGH.

3.DETERMINE REASON AND CORRECT.

 

 

4.EXCESSIVE SHORT CYCLING.

4.DETERMINE REASON AND CORRECT

 

 

 

(SEE PROBLEM # 5).

 

 

 

5.LOOSE OR VIBRATING MOUNTING POSITION

5.REMOUNT RIGIDLY.

 

 

 

6.INCORRECT RUN CAPACITOR.

6.REPLACE WITH PROPER CAPACITOR.

 

 

7.LOOSE WIRING ON RELAY OR OVERLOAD.

7.TIGHTEN ALL WIRING SCREWS.

- 24 -

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Reach-In and Roll-In Operators Manual Table of Contents Receiving Your NEW Model General Information and Important Operating FactsVentilation Installation and Location ClearancesUncrating Your NEW Model Minimum Clearance Dimensions Floor LoadsMounting ROLL-IN Models in Place and Leveling Installing Legs and Leveling REACH-IN ModelsLEG Installation Installing Casters and Leveling REACH-IN Models Casters Must be Tight to Cabinet BottomInstalling Condensate Evaporator Condensate Evaporator InstallationRemoval of Doors and Door Adjustment Door Adjustment and RemovalInitial Cleaning Procedure Removal of GrillSpecial Voltage Connections START-UP Procedure Electrical ConnectionsVOLT, 60 HZ, 1 Phase Connection START-UP Checklist Remote ApplicationsCalibration Check OperationThermometer Calibration Dial ThermometerThermometer Calibration Refrigerator System and Adjustment Refrigerator and Freezer ThermostatFreezer System and Adjustment Defrost OperationDefrost Timer Setting Warmer System and Adjustment Evaporator Assembly LOW-PROFILE,CEILING-MOUNT Evaporator AssemblyPLUG-TYPE,TOP-MOUNT Evaporator Assembly PLUG-TYPE,TOP-MOUNT Evaporator AssemblyInterior REACH-IN Accessories Standard PilasterOptional Interior Accessories Optional HEAVY-DUTY Pilaster Optional Angle PAN SlidesMaintenance Periodic Cleaning Procedure Safety PrecautionsGeneral Preventative Maintenance Sliding and Hinged GlassParts and Service Condensing unit will Problem Probable Cause Correction But short cycles onProduct zone Wiring Diagrams Page Page Page Page Page Page

Refrigerators/Freezers/Warmers specifications

Bally Refrigerated Boxes is a prominent name in the realm of commercial refrigeration, specializing in high-quality refrigerators, freezers, and warmers designed for a variety of food service environments. With a commitment to innovation and efficiency, Bally’s products cater to the needs of restaurants, catering businesses, and food retailers, ensuring that perishable goods are stored at optimal temperatures while maintaining quality.

One of the standout features of Bally Refrigerated Boxes is their versatility. Their product line includes reach-in refrigerators and freezers, undercounter units, and pass-through models, allowing businesses to choose the best fit for their kitchen layout and operational requirements. This versatility is complemented by a variety of sizes and configurations, enabling users to maximize storage space while keeping products accessible.

Energy efficiency is a central focus of Bally’s design philosophy. Many models are equipped with advanced insulation technology and energy-efficient compressors, which significantly reduce energy consumption without compromising performance. This not only leads to lower operational costs but also aligns with modern sustainability goals, helping businesses minimize their environmental footprint.

Bally Refrigerated Boxes also incorporate state-of-the-art temperature control systems. These units often feature digital temperature displays, which allow for precise monitoring and easy adjustments. Some models are equipped with smart technology that can send alerts in case of temperature fluctuations, ensuring that products are always kept within safe limits.

Durability is another hallmark of Bally products. Constructed from high-quality stainless steel, both the interiors and exteriors are designed to withstand the rigorous demands of commercial kitchens. This material not only enhances the longevity of the units but also makes them easy to clean, promoting hygiene in food storage environments.

Moreover, user-friendly designs are a priority, with thoughtfully arranged interior shelving options that cater to various product sizes and shapes. The user experience is enhanced with features such as LED lighting, which provides excellent visibility while being energy-efficient.

In conclusion, Bally Refrigerated Boxes' refrigerators, freezers, and warmers are built to deliver on performance, efficiency, and durability. With a wide range of options tailored to commercial needs, their innovative technology and design characteristics make them a reliable choice for any food service operation. Professionals in the industry can trust Bally to not only meet but exceed their refrigeration and warming requirements, ensuring that food safety and quality remain paramount.
Top Page Image Contents