Bally Refrigerated Boxes Refrigerators/Freezers/Warmers Casters Must be Tight to Cabinet Bottom

Page 7

Important Note: It is extremely important that your new reach-in or roll-in model is perfectly level for proper operation. If it is not level, the following adverse conditions will become apparent:

1.The door(s) will not be properly aligned and consequently will not provide a good seal. Roll-in door wiper(s) may bind.

2.Your model will run excessively due to improper door seal(s).

3.An excessive amount of ice will accumulate inside the cabinet, around the door opening(s) and especially on the finned evaporator coil. If allowed to continue,

ice will eventually block the coil and the model will fail. This will

result in the

loss of all food stored within the cabinet.

 

4.Defrost water will fail to drain properly and will overflow the evaporator coil drain pan and into the cabinet of both refrigerator and freezer models.

INSTALLING CASTERS AND LEVELING REACH-IN MODELS

If you wish to install casters on your new reach-in model, follow the steps above for "installing legs" to install the casters, making sure again that the casters are tightened extremely well (see figure 3). If the casters are not installed tightly, the cabinet will sway or rock with each opening or closing of the doors, possibly causing damage to the case bottom.

To assure that your cabinet is level, caster cups must be installed under the casters which need leveling. Caster cups are not provided with your new model but can be purchased at most hardware or furniture stores. Do not attempt to level casters by unscrewing them from the case bottom as this will cause damage to the cabinet bottom and leg hole threads, voiding all warranties.

FIGURE 3

CASTERS MUST BE TIGHT TO CABINET BOTTOM

- 5 -

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Reach-In and Roll-In Operators Manual Table of Contents General Information and Important Operating Facts Receiving Your NEW ModelUncrating Your NEW Model Installation and Location ClearancesVentilation Floor Loads Minimum Clearance DimensionsLEG Installation Installing Legs and Leveling REACH-IN ModelsMounting ROLL-IN Models in Place and Leveling Casters Must be Tight to Cabinet Bottom Installing Casters and Leveling REACH-IN ModelsCondensate Evaporator Installation Installing Condensate EvaporatorDoor Adjustment and Removal Removal of Doors and Door AdjustmentRemoval of Grill Initial Cleaning ProcedureVOLT, 60 HZ, 1 Phase Connection START-UP Procedure Electrical ConnectionsSpecial Voltage Connections Remote Applications START-UP ChecklistDial Thermometer OperationThermometer Calibration Calibration CheckThermometer Calibration Refrigerator and Freezer Thermostat Refrigerator System and AdjustmentDefrost Operation Freezer System and AdjustmentDefrost Timer Setting Warmer System and Adjustment LOW-PROFILE,CEILING-MOUNT Evaporator Assembly Evaporator AssemblyPLUG-TYPE,TOP-MOUNT Evaporator Assembly PLUG-TYPE,TOP-MOUNT Evaporator AssemblyStandard Pilaster Interior REACH-IN AccessoriesOptional HEAVY-DUTY Pilaster Optional Angle PAN Slides Optional Interior AccessoriesSafety Precautions Maintenance Periodic Cleaning ProcedureSliding and Hinged Glass General Preventative MaintenanceParts and Service Condensing unit will But short cycles on Problem Probable Cause CorrectionProduct zone Wiring Diagrams Page Page Page Page Page Page

Refrigerators/Freezers/Warmers specifications

Bally Refrigerated Boxes is a prominent name in the realm of commercial refrigeration, specializing in high-quality refrigerators, freezers, and warmers designed for a variety of food service environments. With a commitment to innovation and efficiency, Bally’s products cater to the needs of restaurants, catering businesses, and food retailers, ensuring that perishable goods are stored at optimal temperatures while maintaining quality.

One of the standout features of Bally Refrigerated Boxes is their versatility. Their product line includes reach-in refrigerators and freezers, undercounter units, and pass-through models, allowing businesses to choose the best fit for their kitchen layout and operational requirements. This versatility is complemented by a variety of sizes and configurations, enabling users to maximize storage space while keeping products accessible.

Energy efficiency is a central focus of Bally’s design philosophy. Many models are equipped with advanced insulation technology and energy-efficient compressors, which significantly reduce energy consumption without compromising performance. This not only leads to lower operational costs but also aligns with modern sustainability goals, helping businesses minimize their environmental footprint.

Bally Refrigerated Boxes also incorporate state-of-the-art temperature control systems. These units often feature digital temperature displays, which allow for precise monitoring and easy adjustments. Some models are equipped with smart technology that can send alerts in case of temperature fluctuations, ensuring that products are always kept within safe limits.

Durability is another hallmark of Bally products. Constructed from high-quality stainless steel, both the interiors and exteriors are designed to withstand the rigorous demands of commercial kitchens. This material not only enhances the longevity of the units but also makes them easy to clean, promoting hygiene in food storage environments.

Moreover, user-friendly designs are a priority, with thoughtfully arranged interior shelving options that cater to various product sizes and shapes. The user experience is enhanced with features such as LED lighting, which provides excellent visibility while being energy-efficient.

In conclusion, Bally Refrigerated Boxes' refrigerators, freezers, and warmers are built to deliver on performance, efficiency, and durability. With a wide range of options tailored to commercial needs, their innovative technology and design characteristics make them a reliable choice for any food service operation. Professionals in the industry can trust Bally to not only meet but exceed their refrigeration and warming requirements, ensuring that food safety and quality remain paramount.
Top Page Image Contents