Bally Refrigerated Boxes Refrigerators/Freezers/Warmers manual LEG Installation

Page 6

INSTALLING LEGS AND LEVELING REACH-IN MODELS

Your new reach-in model is supplied with adjustable type legs for leveling purposes. Each single and two section model has four leg mounting holes on its case bottom, and three section models have six leg mounting holes. Legs are packed in the accessory carton from which they must be removed and installed on the cabinet case bottom (see figure 2). In order to install the legs, carefully tip the cabinet rearward adding four (4) 2" wood blocks underneath and simply screw the threaded leg studs into the case bottom front leg holes. Repeat this procedure by tilting the cabinet in the opposite direction and install the remaining legs. Make sure the legs are tightened extremely well or the entire model will sway or rock with each opening or closing of the doors, possibly causing damage to the case bottom. This procedure should be performed close to the final installation site and allow access to the rear of the cabinet for condensate evaporator installation (see "condensate evaporator installation" under installation and location section).

To assure your cabinet is level, all legs are equipped with bullet-type leveling bolts. These bolts can be turned by hand or by wrench, clockwise or counterclockwise to level the cabinet.

FIGURE 2

LEG INSTALLATION

MOUNTING ROLL-IN MODELS IN PLACE AND LEVELING

Your new roll-in model is designed and constructed to be mounted directly on the floor without legs or casters. The floor must be level and the base of the cabinet should be sealed to the floor around its entire perimeter. If the floor is not level, it must be made level prior to mounting your roll-in model.

Your roll-in model comes with one cart ramp per door opening. To install the ramp(s), simply open the cabinet door and position the ramp slots onto the screws located along the cabinet bottom front. If the door wiper rubs along the ramp to the extreme where the door will not self-close, you will need to adjust the door (see "door adjustment" section) or level the cabinet as explained above.

- 4 -

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Reach-In and Roll-In Operators Manual Table of Contents Receiving Your NEW Model General Information and Important Operating FactsInstallation and Location Clearances Uncrating Your NEW ModelVentilation Minimum Clearance Dimensions Floor LoadsInstalling Legs and Leveling REACH-IN Models LEG InstallationMounting ROLL-IN Models in Place and Leveling Installing Casters and Leveling REACH-IN Models Casters Must be Tight to Cabinet BottomInstalling Condensate Evaporator Condensate Evaporator InstallationRemoval of Doors and Door Adjustment Door Adjustment and RemovalInitial Cleaning Procedure Removal of GrillSTART-UP Procedure Electrical Connections VOLT, 60 HZ, 1 Phase ConnectionSpecial Voltage Connections START-UP Checklist Remote ApplicationsCalibration Check OperationThermometer Calibration Dial ThermometerThermometer Calibration Refrigerator System and Adjustment Refrigerator and Freezer ThermostatFreezer System and Adjustment Defrost OperationDefrost Timer Setting Warmer System and Adjustment Evaporator Assembly LOW-PROFILE,CEILING-MOUNT Evaporator AssemblyPLUG-TYPE,TOP-MOUNT Evaporator Assembly PLUG-TYPE,TOP-MOUNT Evaporator AssemblyInterior REACH-IN Accessories Standard PilasterOptional Interior Accessories Optional HEAVY-DUTY Pilaster Optional Angle PAN SlidesMaintenance Periodic Cleaning Procedure Safety PrecautionsGeneral Preventative Maintenance Sliding and Hinged GlassParts and Service Condensing unit will Problem Probable Cause Correction But short cycles onProduct zone Wiring Diagrams Page Page Page Page Page Page

Refrigerators/Freezers/Warmers specifications

Bally Refrigerated Boxes is a prominent name in the realm of commercial refrigeration, specializing in high-quality refrigerators, freezers, and warmers designed for a variety of food service environments. With a commitment to innovation and efficiency, Bally’s products cater to the needs of restaurants, catering businesses, and food retailers, ensuring that perishable goods are stored at optimal temperatures while maintaining quality.

One of the standout features of Bally Refrigerated Boxes is their versatility. Their product line includes reach-in refrigerators and freezers, undercounter units, and pass-through models, allowing businesses to choose the best fit for their kitchen layout and operational requirements. This versatility is complemented by a variety of sizes and configurations, enabling users to maximize storage space while keeping products accessible.

Energy efficiency is a central focus of Bally’s design philosophy. Many models are equipped with advanced insulation technology and energy-efficient compressors, which significantly reduce energy consumption without compromising performance. This not only leads to lower operational costs but also aligns with modern sustainability goals, helping businesses minimize their environmental footprint.

Bally Refrigerated Boxes also incorporate state-of-the-art temperature control systems. These units often feature digital temperature displays, which allow for precise monitoring and easy adjustments. Some models are equipped with smart technology that can send alerts in case of temperature fluctuations, ensuring that products are always kept within safe limits.

Durability is another hallmark of Bally products. Constructed from high-quality stainless steel, both the interiors and exteriors are designed to withstand the rigorous demands of commercial kitchens. This material not only enhances the longevity of the units but also makes them easy to clean, promoting hygiene in food storage environments.

Moreover, user-friendly designs are a priority, with thoughtfully arranged interior shelving options that cater to various product sizes and shapes. The user experience is enhanced with features such as LED lighting, which provides excellent visibility while being energy-efficient.

In conclusion, Bally Refrigerated Boxes' refrigerators, freezers, and warmers are built to deliver on performance, efficiency, and durability. With a wide range of options tailored to commercial needs, their innovative technology and design characteristics make them a reliable choice for any food service operation. Professionals in the industry can trust Bally to not only meet but exceed their refrigeration and warming requirements, ensuring that food safety and quality remain paramount.
Top Page Image Contents