(4)Attachment of Overlay Panel to Door
1)Fasten the sheet metal bracket to the overlay panel using the two M4×8 truss head screws provided. Snug the screws, but do not tighten. See Fig. 13.
2)Temporarily fasten the overlay panel to the door using 2 of the M4×25 pan head screws provided. See Fig. 14.
Overlay Panel
Snug the screws, but do not tighten.
Sheet Metal Bracket
Fig. 13
Screws |
Fig. 14
3)Adjust the sheet metal bracket so that it is flush with the bottom of the door. See Fig. 15.
4)Remove the overlay panel from the door and tighten the two M4×8 truss head screws securing the sheet metal bracket to the overlay panel. See Fig. 16.
Door |
Sheet Metal Bracket
Fig. 15
Overlay Panel
Tighten the screws.
Sheet Metal Bracket
Fig. 16
5)Fasten the overlay panel to the door using the four M4×25 pan head screws provided. Snug the screws, but do not tighten. See Fig. 17.
6)Fasten the sheet metal bracket to the bottom of the door with the three T2 screws provided. Tighten the screws to the door. See Fig. 18.
Snug the screws, |
but do not tighten. |
Fig. 17 |
DoorScrews
Overlay Panel | Sheet Metal Bracket |
Fig. 18
18