D.Setup
1)Position the icemaker in the selected permanent location.
2)Level the icemaker from
E.Electrical Connection
WARNING
1.Electrical connection must meet national, state, and local electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious injury, fire, or severe damage to equipment.
2.This unit requires an independent power supply. See the nameplate for proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse can result in a tripped breaker, blown fuse, or damage to existing wiring. This could lead to heat generation or fire.
3.THIS APPLIANCE MUST BE GROUNDED: This unit is equipped with a
4.Do not use an extension cord.
5.Make sure the control switch is in the "OFF" position before plugging in or unplugging the unit to reduce the risk of electric shock.
6.Do not use a unit with a damaged power cord. The power cord should not be altered, jerked, bundled, weighed down, pinched, or tangled. Such actions could result in electric shock or fire. To unplug the unit, be sure to pull the plug, not the cord, and do not jerk the cord.
7.To reduce the risk of electric shock, do not touch the plug or control switch with damp hands.
8.The GREEN ground wire in the
•Usually an electrical permit and services of a licensed electrician are required.
•The maximum allowable voltage variation is ±10 percent of the nameplate rating.
•For optional drain pump installation, refer to the instruction manual included with the pump.
20