INTEGRATING CABINETRY
Overlay Panels - side by side install
The overlay design line allows decorative panels to cover the door trim for a more seamless appear- ance that blends with the design of the room. To achieve this look, the most common way is to work
with three panels, the decorative overlay panel, a 3/32" (2.5 mm) spacer panel and a 1/4" (6.4 mm) backer panel.
Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or, more likely, three different panels.
|
|
|
|
| W |
|
|
| 1 Overlay Panel |
| = |
|
|
| 2 Spacer Panel |
|
|
|
|
| 3 Backer Panel |
|
|
|
|
| Approx. 3/4" |
|
|
|
|
| (19.1mm) |
|
|
|
|
| 3/32" (2.5mm) |
|
|
|
|
| 1/4" (6.4mm) |
| = |
|
|
|
|
| |
|
|
|
|
| Window cutout |
| W | H - Winecooler H - Freezer |
| = | |
|
|
| |||
1 Overlay | 38" |
|
| ||
Panel | (592 mm) | (854 mm) | (965 mm) |
|
|
2 Spacer |
|
| |||
Panel | (553 mm) | (800 mm) | (921 mm) | (9mm) | = |
|
|
| 3/8" |
| |
3 Backer |
| = | |||
Panel | (578 mm) | (828 mm) | (947 mm) |
| |
Window | max |
|
|
| |
cutout | (445 mm) | (648 mm) |
|
|
|
| IMPORTANT |
|
|
| |
If you are replacing the factory air vents with an |
|
| |||
overlay, DO NOT restrict the air flow. The air flow |
| = | |||
must be the same or greater than the factory air |
| ||||
|
| ||||
vents of 31 square inches (200 cm²). |
|
| |||
The door handles must be installed on the | Side |
| |||
overlay panels before the screw covers are |
| ||||
installed. If you fail to install the handles on | Handle |
| |||
you can damage the covers. The screw covers |
| ||||
the overlay panels before the screw covers , |
|
| |||
are taped to the unit doors during shipping. |
|
| |||
Use care when removing covers. |
|
| |||
The door panel weight must not exceed |
|
| |||
25 lb (11,3 kg). |
|
| (9mm) | = | |
|
|
| 3/8" | ||
|
|
|
| ||
=
=
= H Freezer
SideHinge
H | Winecooler |
A delight in freshness | 3/16" |
(4.7mm) |
10 | WFI1051 / EWTN 2956 |