REVERSING DOOR HINGES
The door hinges can be changed from one side to the other if required.
1. Figure 10: Top: Unscrew the hinge pin (2) and remove the screw (5) with the eccentric.
2. Swivel out the door at the top, ensuring that you do not lose the stop (7) and bushing (8); lift off the door and place it on the floor.
3.Center: Pull out the hinge pin (9) with its washer.
4.Swivel out the lower door, lift it out and place it on the floor. Take care not to lose the stop (7) and washers (8).
5.Unscrew all the door fittings (14, 15, 16, 17).
6.Figure 11: Unscrew all the door change frames and exchange them with one another (6 with 8, 4 with 7 and handle - remove cover 1). Secure them in position using the same screws.
7.Ensure that the door change frames are cor- rectly positioned and mitered.
!WARNING
Make sure the corners of the door change frames are positioned correctly. Sharp edges will be exposed if they are not mitered or positioned correctly.
Figure 11
A delight in freshness
8
8
LBR027
Figure 10
14 | WFI1051 / EWTN 2956 |