INTEGRATING CABINETRY
Overlay Panels - single install - Figure 6
The overlay design line allows decorative panels to cover the door trim for a more seamless appear- ance that blends with the design of the room. To achieve this look, the most common way is to work
with three panels, the decorative overlay panel, a 3/32" (2.5 mm) spacer panel and a 1/4" (6.4 mm) backer panel.
Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or, more likely, three different panels.
|
| W |
1 | Overlay Panel | = |
2 | Spacer Panel |
|
3 Backer Panel Approx. 3/4" (19.1mm)
3/32" (2.5mm)
1/4" (6.4mm)
=
Window cutout
=
W | H - Winecooler H - Freezer |
1 Overlay | 38" |
|
|
| ||
Panel | (592 mm) | (854 mm) | (965 mm) |
|
|
|
2 Spacer |
|
| = | |||
Panel | (553 mm) | (800 mm) | (921 mm) | 3/8" | (9mm) | |
|
|
|
|
| ||
3 Backer |
|
| = | |||
Panel | (576 mm) | (828 mm) | (947 mm) |
|
| |
|
|
| ||||
Window | max |
|
|
|
| |
cutout | (445 mm) | (648 mm) |
|
|
|
|
| IMPORTANT |
|
|
|
| |
If you are replacing the factory air vents with an |
|
|
| |||
overlay, DO NOT restrict the air flow. The air flow |
|
| = | |||
must be the same or greater than the factory air |
|
|
| |||
vents of 31 square inches (200 cm²). |
|
|
| |||
The door handles must be installed on the |
|
|
| |||
overlay panels before the screw covers are |
|
|
| |||
installed. If you fail to install the handles on |
|
|
| |||
the overlay panels before the screw covers , |
|
|
| |||
you can damage the covers. The screw covers |
|
|
| |||
are taped to the unit doors during shipping. |
|
|
| |||
Use care when removing covers. |
|
|
|
| ||
The door panel weight must not exceed |
|
|
| |||
25 lb (11,3 kg). |
|
| 3/8" | (9mm) | = | |
|
|
|
| |||
|
| Figure 6 |
|
| ||
|
|
|
|
| = | |
|
|
|
|
|
| |
=
=
= H Freezer
=
H | Winecooler |
A delight in freshness
WFI1051 / EWTN 2956 | 9 |