Liebherr BGEN/es 2956, BF/BFI 1051 Unpacking, Disposal of Carton, Safety Regulations

Page 8

UNPACKING

!CAUTION

To avoid risk of personal injury or property damage, have two people unpack and move this appliance into place.

!CAUTION

Protect the finished floor surface before you uncrate the unit.

Avoid placing the appliance in direct sunlight or near the stove, range top, radiators and similar heat sources. DO NOT place microwave ovens, toaster ovens or other heat-emitting appliances on top of this unit.

The floor under the appliance should be flat and level.

Keep the appliance out of the weather. The ventilation grilles should not be obstructed. Always ensure there is good ventilation all around the appliance.

As soon as you uncrate the unit:

•Examine the unit and packaging for shipping damage. Contact the carrier immediately if you suspect there is any damage.

•Note the type (model number), index, serial number, date of purchase and where purchased on the spaces provided in the back of this manual.

Disposal of Carton

The packaging is designed to protect the appliance and individual components during moving and is made of recyclable materials.

•Corrugated board/board

•Molded polystyrene (foamed, CFC-free polystyrene)

•Polythene bags and sheets

•Polypropylene straps

!WARNING

Keep packaging materials away from children. Polythene sheets and bags can cause suffocation!

•Please take the packaging material to your local recycling facility.

Safety Regulations

The appliance complies with UL250 and is designed to cool, freeze and store food and to make ice (if equipped). It is designed as a household appliance. If used commercially, the relevant regulations on commercial use must be observed.

The appliance is set to operate within specific ambient temperature limits according to its climate rating. These temperature limits should not be exceeded. The correct climate rating for your appliance is indicated on the model plate.

This is explained as follows:

Climate

 

Rating

Set for Ambient Temperatures of

 

 

SN

50°F to 90°F (10°C to 32°C)

N

61°F to 90°F (16°C to 32°C)

ST

65°F to 100°F (18°C to 38°C)

T65°F to 109°F (18°C to 43°C)

SN-T 50°F to 109°F (10°C to 43°C)

-The refrigerant circuit has been tested for leaks.

-The appliance complies with current safety regulations UL250 and CSA C22.2 #63.

We recommend cleaning the appliance before turning it ON for the first time. See Cleaning. Turn ON the appliance several hours before loading

it with frozen food for the first time. Do not load with frozen food until the temperature shows approximately 0°F (-18°C).

!WARNING

Do not allow children to play with the appliance. Children must not climb, sit or stand on the shelves, drawers or door.

4

BF/BFI 1051

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use Care Manual Additional benefits Table of Contents BF/BFI Features Operating and Control Elements FigureDisposal of Old Appliance SafetyImportant Safety Information IceMaker if equipped Electrical SafetySafety Instructions Disposal of Carton Safety RegulationsUnpacking Setting the Temperature Figure To reduce the temperatureTo increase the temperature OperationAdditional Features Temperature Display FigureAudible Warning Signal Figure Display will flashAudible Door Alarm For BioFresh Audible/Visual TemperaturePower Failure/Frost-Control SuperFrost FigureBiofresh Compartment BioFresh CompartmentHumidity Selection Figure Storage TimesHumid setting Vegetables, salad FruitArranging Food Figure Shelf Arrangement To install the drawers Interior Light FigureTo remove the drawers Bulb dataFreezer Compartment Freezing, Storage FigureFreezing with SuperFrost Figure Information System FigureRemoving and Installing the Shelves Freezing and StorageRemoving Drawers Do Not FreezeTo Start the IceMaker Figure To Clean the IceMaker FigureIcemaker DEFROSTING/CLEANING Cleaning FigureTo clean the storage shelves To clean the BioFresh drawersLong vacations Vacation TipsShort vacations Troubleshooting Problem Possible Cause and RemedyNormal Sounds Failure/Frost-Control DisplayAppliance Information WarrantyCustomer Service Figure Liebherr Warranty Plan

BF/BFI 1051, BGEN/es 2956 specifications

The Liebherr BGEN/es 2956 and BF/BFI 1051 are two innovative products from the renowned Liebherr Group, known for its cutting-edge technology and exceptional engineering in the construction and building industries. Both units exemplify Liebherr's commitment to quality, efficiency, and user-friendly operation.

The Liebherr BGEN/es 2956 is a powerful and versatile tower crane that has gained popularity in the construction sector. It boasts a maximum lifting capacity of 25 tons and a maximum hook height of over 60 meters, making it suitable for large-scale construction projects. One of its standout features is its innovative counter-jib design, which drastically reduces the crane's footprint, allowing for efficient use of space on crowded job sites. Additionally, the BGEN/es 2956 is equipped with advanced control technology, enabling precise and smooth operation. The crane's transportability is also a key characteristic, allowing for easy assembly and disassembly without compromising structural integrity.

On the other hand, the Liebherr BF/BFI 1051 series represents a modern take on concrete batching technology. These powerful concrete mixing plants are designed for high output and efficiency, providing a consistent quality of concrete at various production scales. The BF/BFI 1051 plants incorporate state-of-the-art automation systems, making it possible to monitor and control the mixing process remotely. This feature enhances operational efficiency and minimizes downtime. The system’s modular design also allows for easy customization, enabling users to adapt the equipment to different production requirements.

Both the BGEN/es 2956 and BF/BFI 1051 exemplify Liebherr's dedication to sustainability. The crane integrates energy-saving technologies, significantly reducing its overall carbon footprint. Meanwhile, the concrete plants are designed to optimize resource usage, ensuring minimal waste during operation.

In conclusion, the Liebherr BGEN/es 2956 and BF/BFI 1051 offer impressive features and technologies that meet the demands of modern construction and concrete production. With their robust engineering, advanced automation, and focus on sustainability, they are valuable assets for any construction project. Liebherr continues to set standards in the industry, providing innovative solutions that enhance productivity and efficiency in various applications.
Top Page Image Contents