Liebherr BF/BFI 1051 Interior Light Figure, To remove the drawers, To install the drawers

Page 15

BIOFRESH COMPARTMENT

Drawer - Figure 5

Figure 5

To remove the drawers:

Pull the drawer straight out, grip at the back and lift out.

To install the drawers:

Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.

Interior Light - Figure 6

This turns OFF automatically after the door has been opened for approximately 15 minutes. If it does not turn ON when the door is opened briefly, but the temperature display is working, the bulb may be defective.

Bulb data:

120 V, Maximum wattage - 25 W Bulb fitting - E14

Current and voltage must agree with details on the model plate.

Replacing the bulb:

!WARNING

To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before replacing the interior light bulb(s) or cleaning the appliance.

!CAUTION

To prevent possible injury due to broken glass, use hand protection when replacing the interior light bulb(s).

Figure 6

•Press the light cover together at the sides (1), lift out and unclip (2).

•Replace the bulb.

•Clip the back end of the cover in and clip the sides into place.

BF/BFI 1051

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Use Care Manual Additional benefits Table of Contents BF/BFI Operating and Control Elements Figure FeaturesSafety Important Safety InformationDisposal of Old Appliance Electrical Safety Safety InstructionsIceMaker if equipped Safety Regulations UnpackingDisposal of Carton Operation Setting the Temperature FigureTo reduce the temperature To increase the temperatureDisplay will flash Additional FeaturesTemperature Display Figure Audible Warning Signal FigureSuperFrost Figure Audible Door Alarm For BioFreshAudible/Visual Temperature Power Failure/Frost-ControlStorage Times Biofresh CompartmentBioFresh Compartment Humidity Selection FigureFruit Humid setting Vegetables, saladArranging Food Figure Shelf Arrangement Bulb data To install the drawersInterior Light Figure To remove the drawersInformation System Figure Freezer CompartmentFreezing, Storage Figure Freezing with SuperFrost FigureDo Not Freeze Removing and Installing the ShelvesFreezing and Storage Removing DrawersTo Clean the IceMaker Figure IcemakerTo Start the IceMaker Figure To clean the BioFresh drawers DEFROSTING/CLEANINGCleaning Figure To clean the storage shelvesVacation Tips Short vacationsLong vacations Failure/Frost-Control Display TroubleshootingProblem Possible Cause and Remedy Normal SoundsWarranty Customer Service FigureAppliance Information Liebherr Warranty Plan

BF/BFI 1051, BGEN/es 2956 specifications

The Liebherr BGEN/es 2956 and BF/BFI 1051 are two innovative products from the renowned Liebherr Group, known for its cutting-edge technology and exceptional engineering in the construction and building industries. Both units exemplify Liebherr's commitment to quality, efficiency, and user-friendly operation.

The Liebherr BGEN/es 2956 is a powerful and versatile tower crane that has gained popularity in the construction sector. It boasts a maximum lifting capacity of 25 tons and a maximum hook height of over 60 meters, making it suitable for large-scale construction projects. One of its standout features is its innovative counter-jib design, which drastically reduces the crane's footprint, allowing for efficient use of space on crowded job sites. Additionally, the BGEN/es 2956 is equipped with advanced control technology, enabling precise and smooth operation. The crane's transportability is also a key characteristic, allowing for easy assembly and disassembly without compromising structural integrity.

On the other hand, the Liebherr BF/BFI 1051 series represents a modern take on concrete batching technology. These powerful concrete mixing plants are designed for high output and efficiency, providing a consistent quality of concrete at various production scales. The BF/BFI 1051 plants incorporate state-of-the-art automation systems, making it possible to monitor and control the mixing process remotely. This feature enhances operational efficiency and minimizes downtime. The system’s modular design also allows for easy customization, enabling users to adapt the equipment to different production requirements.

Both the BGEN/es 2956 and BF/BFI 1051 exemplify Liebherr's dedication to sustainability. The crane integrates energy-saving technologies, significantly reducing its overall carbon footprint. Meanwhile, the concrete plants are designed to optimize resource usage, ensuring minimal waste during operation.

In conclusion, the Liebherr BGEN/es 2956 and BF/BFI 1051 offer impressive features and technologies that meet the demands of modern construction and concrete production. With their robust engineering, advanced automation, and focus on sustainability, they are valuable assets for any construction project. Liebherr continues to set standards in the industry, providing innovative solutions that enhance productivity and efficiency in various applications.
Top Page Image Contents