Troubleshooting, Normal Sounds | Liebherr BF/BFI 1051, BGEN/es 2956

TROUBLESHOOTING

Your appliance is designed and manufactured for a long life and reliable operation.

If a problem occurs during operation, check whether it is due to an operating error. Please note

that even during the warranty period, some repair costs may be your responsibility.

You may be able to correct the following faults by checking the possible causes yourself:

Problem		Possible Cause and Remedy

Appliance does not work,		- Is the appliance turned ON properly?
display is OFF		- Is the power source plug properly inserted in the socket?
		- Is the circuit breaker or fuse in operating condition?

The interior light does		- Is the refrigerator compartment turned ON?
not come ON		- Has the door been open for more than 15 minutes?
		- The bulb is defective. Change the bulb as described in Interior light.

Loud running noise		- Is the appliance standing firmly on the floor, or does the compressor
		cause nearby items of furniture or objects to vibrate? If necessary, move
		the appliance slightly, align by adjusting the adjustable feet, or move
		bottles and containers apart.
		Normal Sounds:
		Flow noises, bubbling or dripping noises are from the refrigerant flowing in
		the refrigerant circuit.
		A short clicking sound can be heard whenever the refrigeration unit
		(the motor) automatically switches ON or OFF. The motor noise will be
		slightly louder for a brief period when the refrigeration unit switches ON.
		The refrigerating capacity will increase when the SuperFrost function is
		activated, fresh food has just been placed in the appliance or the door has
		been left open for a while.
		A low-pitched humming sound is caused by air flow noises in the fan.

Motor seems to		- Is the ambient temperature too hot? See Safety Regulations.
run too long		- Has the appliance been opened too often or left open too long?
		- A large amount of food has been added.
		- Unit is in Supercooling mode. Verify unit is in normal operation mode.

Alarm sounds,		- Is the temperature setting correct? See Setting The Temperature.
the temperature is		- Is the door closed properly?
not cold enough		- Has an excessive amount of fresh food been placed in the appliance?
		- Does a separately installed thermometer show the correct reading?
		- Is the unit ventilated properly? Clean ventilation grilles.
		- Is the appliance set up too close to a heat source?

	appears in the	There has been a power failure; proceed as described in Power
	appears in the
display		Failure/Frost-Control Display.

Icemaker cannot be		Is the combined refrigerator-freezer connected to the electrical outlet?
turned on.

Icemaker is not making		- Is the icemaker turned on?
any ice.		- Is the water supply line open?
		- Is the icemaker drawer closed properly?

		* Depending on model and options

BF/BFI 1051

BF/BFI 1051, BGEN/es 2956 specifications

The Liebherr BGEN/es 2956 and BF/BFI 1051 are two innovative products from the renowned Liebherr Group, known for its cutting-edge technology and exceptional engineering in the construction and building industries. Both units exemplify Liebherr's commitment to quality, efficiency, and user-friendly operation.

The Liebherr BGEN/es 2956 is a powerful and versatile tower crane that has gained popularity in the construction sector. It boasts a maximum lifting capacity of 25 tons and a maximum hook height of over 60 meters, making it suitable for large-scale construction projects. One of its standout features is its innovative counter-jib design, which drastically reduces the crane's footprint, allowing for efficient use of space on crowded job sites. Additionally, the BGEN/es 2956 is equipped with advanced control technology, enabling precise and smooth operation. The crane's transportability is also a key characteristic, allowing for easy assembly and disassembly without compromising structural integrity.

On the other hand, the Liebherr BF/BFI 1051 series represents a modern take on concrete batching technology. These powerful concrete mixing plants are designed for high output and efficiency, providing a consistent quality of concrete at various production scales. The BF/BFI 1051 plants incorporate state-of-the-art automation systems, making it possible to monitor and control the mixing process remotely. This feature enhances operational efficiency and minimizes downtime. The system’s modular design also allows for easy customization, enabling users to adapt the equipment to different production requirements.

Both the BGEN/es 2956 and BF/BFI 1051 exemplify Liebherr's dedication to sustainability. The crane integrates energy-saving technologies, significantly reducing its overall carbon footprint. Meanwhile, the concrete plants are designed to optimize resource usage, ensuring minimal waste during operation.

In conclusion, the Liebherr BGEN/es 2956 and BF/BFI 1051 offer impressive features and technologies that meet the demands of modern construction and concrete production. With their robust engineering, advanced automation, and focus on sustainability, they are valuable assets for any construction project. Liebherr continues to set standards in the industry, providing innovative solutions that enhance productivity and efficiency in various applications.