Kyocera K342 manual Setting sounds for your phone, Adjusting volume

Setting sounds for your phone

You can set your phone to sound tones when you open and close the flip and when you turn the phone on and off. Sounds will not occur during an incoming call, if you are in a call, or if a headset or hands-free car kit is attached to your phone.

Set sound when flip opens

1.Select Menu → Settings → Sounds → Flip Open.

2.Scroll through the list to hear the sounds and

press to select one.

Set sound when flip closes

1.Select Menu → Settings → Sounds → Flip Closed.

2.Scroll through the list to hear the sounds and

press to select one.

Set sound when phone powers on or off

•Select Menu → Settings → Sounds → Pwr On/Off Sound → Enabled.

– To deselect this sound, select Disabled.

Adjusting volume

You can adjust the earpiece, speakerphone, and ringer volume as well as key tones.

Adjusting the earpiece volume

To adjust the earpiece volume manually during a

call, press or up or down. To set the earpiece volume:

1.Select Menu → Settings → Sounds → Earpiece Volume.

2.Press right to increase the volume, or left to decrease the volume.

3.Press to select Save.

Using smart sound

You can set a baseline volume that the phone uses to automatically adjust the earpiece volume when there is a change in the amount of noise around you or the caller’s voice.

•Select Menu → Settings → Sounds → Smart Sound→ Enabled.

Adjusting the ringer volume

1.Select Menu → Settings → Sounds → Ringer Volume.

2.Press right to increase the volume, or left to decrease the volume.

3.Press to select Save.

Adjusting speakerphone volume

1.Select Menu → Settings → Sounds → Spkrphone Volume.

2.Press right to increase the volume, or left to decrease the volume.

User Guide for the Kyocera K342 Phone 35