Rangemaster U109300 - 01 Servicing, To Remove the Control Panel, Contents, To Remove Hotplate

Page 32

WARNING  SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

Servicing

1To Remove the Control Panel

Disconnect from electricity supply.

BEFORE SERVICING ANY GAS CARRYING COMPONENTS. TURN OFF THE GAS SUPPLY

Check the appliance is gas sound after completion of service. When checking for gas leaks do not use washing up liquid - this can corrode. Use a product specifically manufactured for leak detection.

Do not use re-conditioned or unauthorised gas controls.

Disconnect from the electricity supply before commencing servicing, particularly before removing any of the following: - control panel, side panels, hotplate tray or any electrical components or covers.

Before electrical re-connection, check that the appliance is electrically safe.

Note - References to LH and RH oven apply as viewed from the front.

Contents

1

To Remove the Control Panel

32

2.

To Remove Hotplate

32

3.

To Remove Side Panels

33

4.

To Remove Light Switch

33

5

To Change an Ignition Switch

33

6.

To Remove Clock

33

7.

To Remove a Thermostat

33

8.

To Change the Grill Controller

33

9.

To Change Hotplate Taps

33

10. To Change Hotplate Burner Injector

34

11. To Change Hotplate Burner Electrode

34

12

To Remove or Change a Hotplate Burner.

34

13. To Remove an Oven Door

34

14. To Change Main Oven Door Outer Panel

34

15. To Change the Main Oven Door Latch

34

16. To Adjust the Main Oven Door Catch Keep

34

17. To Change Oven Door Seal

34

18. To Change Tall Oven Door Outer Panel

35

19. To Change Tall Oven Door Magnetic Latch

35

20. To Remove Grill Element.

35

21. To Remove Oven Inner Back.

35

22. To Change Fan in Oven.

35

23

To Remove an Oven element Thermal Cut-Out.

35

24. To Remove Oven Element.

35

25. To Remove the Left Hand Oven Bottom & Top Elements 35

26. To change oven light bulb.

36

27

To Adjust the Oven Door Angle

36

Pull off all the control knobs.

Open the grill and right hand oven doors and remove the 4 fixing screws underneath the control panel.

Remove the handrail by removing the 2 end bracket fixing screws.

Remove the 2 cross-headed screws that were hidden by the handrail end brackets.

The control panel should drop down slightly. It is held at the top by two holes in the top edge one at each end that locate on tags on the inner panel.

Clear the holes from the inner panel and pull the control panel forward.

Disconnect the wiring from the rear.

Reassemble in reverse order. When replacing leads refer to the wiring diagram. Check operation of timer.

2.To Remove Hotplate

Disconnect from electricity supply.

Remove the pan supports and burner heads. Remove the screws holding the hotplate burners to the hotplate.

Remove the 6 screws holding the hotplate tray to the cooker.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Installation & Service Instructions U109300 Classic DeluxeInstallation Be safeGas and Electricity on Peculiar smellsContents Hotplate Burners Gas burnersCare and Cleaning Wok cradleGriddle Use Only Dry Oven GlovesUsing the grill Glide-out GrillOvens Left Hand OvenClock Cooking using the timer Both OvensTo activate the key lock To turn off the key lockMulti-function oven functions Rapid ResponseDefrost Fan ovenRight Hand Oven Main Oven shelveOven light HandyrackTall oven shelves Ensure meat and poultry is fully cooked before serving Cooking chart Fan assisted oven functionMulti-function Oven cooking guide Oven Cooking chart Conventional and full Fan oven functions FishSingle ring burners Wok burner Cleaning your cookerHotplate burners Grill Control Panel and DoorsCleaning Table Hotplate Part Finish Recommended Cleaning MethodOutside of cooker OvensTroubleshooting Main OvenPower failure Oven temperature getting hotter as the cooker gets olderHotplate ignition or hotplate burners faulty Food is cooking too slowly, too quickly, or burning0800 111 General Safety InstructionsIf you smell gas Specification of this cooker should not be altered Installation Dear InstallerProvision of Ventilation Location of HotplateYou will also need the following tools Checking the partsMoving the Cooker Positioning the CookerUnpacking the Cooker Levelling Fit the HandlesFitting the splash back optional Conversion to LPFitting a stability bracket Gas ConnectionPressures Pressure testingElectrical Connection Oven check Fitting the plinthCustomer care Thank youTap adjustment Conversion to LP gasInjectors To convert to LP gasStick on label Contents ServicingTo Remove the Control Panel To Remove HotplateTo Remove Light Switch To Change the Grill Controller To Change an Ignition SwitchTo Remove Side Panels To Remove a ThermostatTo Adjust the Main Oven Door Catch Keep To Change Hotplate Burner InjectorTo Change Hotplate Burner Electrode To Remove or Change a Hotplate BurnerTo Change Tall Oven Door Outer Panel To Remove an Oven element Thermal Cut-OutTo Remove Grill Element To Remove Oven Inner BackTo change oven light bulb To Adjust the Oven Door AngleTop Element Technical Data DimensionsThis cooker is category II2H3+ ConnectionsCode Colour Circuit DiagramCode Page 070606

U109300 - 01 specifications

The Rangemaster U109300-01 is a remarkable appliance designed to enhance cooking experiences in modern kitchens. This versatile range cooker blends functionality with aesthetic appeal, making it a popular choice for both amateur cooks and professional chefs.

One of the standout features of the U109300-01 is its dual fuel system. This technology combines the precision of gas cooking with the even heat distribution offered by electric ovens. Home chefs can enjoy the immediate heat response of gas burners on the cooktop alongside the consistent baking results delivered by the electric oven. This dual functionality not only optimizes cooking performance but also provides users with the flexibility to cook a wide variety of dishes with precision.

Another notable characteristic of this model is its spacious oven cavity. The Rangemaster U109300-01 boasts multiple cooking zones, allowing users to prepare multiple dishes simultaneously. It is equipped with multiple shelf positions and a generous capacity, making it ideal for meal prepping, baking, or entertaining guests.

In addition to its cooking power, the U109300-01 features advanced technologies designed to improve user experience and safety. The catalytic liners in the oven are specially designed to break down grease and food particles during cooking, making cleaning effortless. Furthermore, the appliance includes a flame failure device, which automatically shuts off the gas supply if a flame is not detected, ensuring safety in the kitchen.

The design of the Rangemaster U109300-01 is equally impressive. With its sleek finish and professional styling, it adds a touch of elegance to any kitchen decor. Available in a variety of colors, this range cooker can fit seamlessly into diverse kitchen aesthetics.

To enhance user convenience, the U109300-01 comes with a programmable timer and a range of cooking modes. Whether baking, roasting, grilling, or simmering, users can select the appropriate settings to achieve the best results.

In summary, the Rangemaster U109300-01 is a feature-rich range cooker that combines modern technology with a classic design. Its dual fuel system, spacious oven, advanced cleaning technologies, and safety features make it an essential addition to any kitchen, appealing to cooks of all skill levels who value performance and style.
Top Page Image Contents