Rangemaster U109300 - 01 manual Installation, Dear Installer, Provision of Ventilation, Conversion

Page 23

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

Installation

Dear Installer

Before you start your installation, please complete the details BELOW.

If your customer has a problem relating to your installation they will be able to contact you easily.

Installer’s Name

Installer’s Company

Installer’s Telephone number

You must be aware of the following safety requirements & regulations

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.

This appliance shall be installed in accordance with the regulations in force and only in a well ventilated space. Read the instructions before installing or using this appliance.

In the UK:-

The regulations and standards are as follows:-

In your own interest and that of safety, it is law that all gas appliances be installed by competent persons. CORGI registered installers undertake to work to safe and satisfactory standards. Failure to install the appliance correctly could invalidate any warranty or liability claims and lead to prosecution.

This appliance should not be installed in a boat or caravan.

The appliance must be installed in accordance with:-

All relevant British Standards / Codes of Practice, in particular BS 5440 Part 2 2000,

For Natural Gas - BS 6172 : 1990 and BS 6891 : 1998 For LP Gas - BS 5482-1:1994 (when the installation is in a permanent dwelling). This appliance should not be installed in a boat or caravan.

The Gas Safety (Installation and Use) regulations 1998.

The relevant Building / IEE regulations.

Provision of Ventilation

This appliance is not connected to a combustion products evacuation device. Particular attention shall be given to the relevant requirements regarding ventilation.

In the UK

The room containing the hotplate should have an air supply in accordance with BS 5440 Part 2 : 2000. All rooms require an openable window or equivalent, while some rooms require a permanent vent in addition to the openable window. The hotplate should not be installed in a bedsitting room with volume less than 20m3. If it is installed in a room

of volume less than 5m3 an air vent of effective area 100cm2 is required; if it is installed in a room of volume between 5m3 and 10m3, an air vent of effective area 50cm2 is required; while if the volume exceeds 11m3, no air vent is required.

If there are other fuel burning appliances in the same room, BS 5440 Part 2 : 2000 should be consulted to determine the requisite air vent requirements.

Location of Hotplate

The hotplate may be installed in a kitchen/kitchen diner but NOT in a room containing a bath or shower.

NOTE:

An appliance for use on LPG shall not be installed in a room or internal space below ground level. e.g. in a basement.

Conversion

All models are supplied set for use on group H natural gas. A conversion kit for LP gas is included with the appliance. See the instructions that are supplied with the conversion kit. After converting the appliance please attach the Gas Conversion sticker over the appropriate area of the data badge, this will identify the gas type the appliance is now set for.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Classic Deluxe Installation & Service Instructions U109300Peculiar smells InstallationBe safe Gas and Electricity onContents Gas burners Hotplate BurnersWok cradle Care and CleaningUse Only Dry Oven Gloves GriddleGlide-out Grill Using the grillLeft Hand Oven OvensClock To turn off the key lock Cooking using the timerBoth Ovens To activate the key lockFan oven Multi-function oven functionsRapid Response DefrostMain Oven shelve Right Hand OvenOven light HandyrackTall oven shelves Ensure meat and poultry is fully cooked before serving Cooking chart Fan assisted oven functionMulti-function Oven cooking guide Fish Oven Cooking chart Conventional and full Fan oven functionsSingle ring burners Wok burner Cleaning your cookerHotplate burners Control Panel and Doors GrillOvens Cleaning Table HotplatePart Finish Recommended Cleaning Method Outside of cookerMain Oven TroubleshootingFood is cooking too slowly, too quickly, or burning Power failureOven temperature getting hotter as the cooker gets older Hotplate ignition or hotplate burners faulty0800 111 General Safety InstructionsIf you smell gas Specification of this cooker should not be altered Location of Hotplate InstallationDear Installer Provision of VentilationChecking the parts You will also need the following toolsMoving the Cooker Positioning the CookerUnpacking the Cooker Conversion to LP LevellingFit the Handles Fitting the splash back optionalGas Connection Fitting a stability bracketPressures Pressure testingElectrical Connection Thank you Oven checkFitting the plinth Customer careTo convert to LP gas Tap adjustmentConversion to LP gas InjectorsStick on label To Remove Hotplate ContentsServicing To Remove the Control PanelTo Remove a Thermostat To Remove Light SwitchTo Change the Grill Controller To Change an Ignition Switch To Remove Side PanelsTo Remove or Change a Hotplate Burner To Adjust the Main Oven Door Catch KeepTo Change Hotplate Burner Injector To Change Hotplate Burner ElectrodeTo Remove Oven Inner Back To Change Tall Oven Door Outer PanelTo Remove an Oven element Thermal Cut-Out To Remove Grill ElementTo change oven light bulb To Adjust the Oven Door AngleTop Element Connections Technical DataDimensions This cooker is category II2H3+Code Colour Circuit DiagramCode Page 070606

U109300 - 01 specifications

The Rangemaster U109300-01 is a remarkable appliance designed to enhance cooking experiences in modern kitchens. This versatile range cooker blends functionality with aesthetic appeal, making it a popular choice for both amateur cooks and professional chefs.

One of the standout features of the U109300-01 is its dual fuel system. This technology combines the precision of gas cooking with the even heat distribution offered by electric ovens. Home chefs can enjoy the immediate heat response of gas burners on the cooktop alongside the consistent baking results delivered by the electric oven. This dual functionality not only optimizes cooking performance but also provides users with the flexibility to cook a wide variety of dishes with precision.

Another notable characteristic of this model is its spacious oven cavity. The Rangemaster U109300-01 boasts multiple cooking zones, allowing users to prepare multiple dishes simultaneously. It is equipped with multiple shelf positions and a generous capacity, making it ideal for meal prepping, baking, or entertaining guests.

In addition to its cooking power, the U109300-01 features advanced technologies designed to improve user experience and safety. The catalytic liners in the oven are specially designed to break down grease and food particles during cooking, making cleaning effortless. Furthermore, the appliance includes a flame failure device, which automatically shuts off the gas supply if a flame is not detected, ensuring safety in the kitchen.

The design of the Rangemaster U109300-01 is equally impressive. With its sleek finish and professional styling, it adds a touch of elegance to any kitchen decor. Available in a variety of colors, this range cooker can fit seamlessly into diverse kitchen aesthetics.

To enhance user convenience, the U109300-01 comes with a programmable timer and a range of cooking modes. Whether baking, roasting, grilling, or simmering, users can select the appropriate settings to achieve the best results.

In summary, the Rangemaster U109300-01 is a feature-rich range cooker that combines modern technology with a classic design. Its dual fuel system, spacious oven, advanced cleaning technologies, and safety features make it an essential addition to any kitchen, appealing to cooks of all skill levels who value performance and style.
Top Page Image Contents