Rangemaster U109300 - 01 To Change Hotplate Burner Injector, To Change Hotplate Burner Electrode

Page 34

WARNING  SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

10. To Change Hotplate Burner Injector

Remove burner cap and head. Remove old jet. Fit new injector. Reassemble in reverse order. Check appliance is gas sound.

11. To Change Hotplate Burner Electrode

Lift off pan supports, remove burner cap. Remove the screw holding the electrode. Pull electrode vertically up sufficiently to grip the lead between thumb and forefinger. Pull off the electrode, but keep hold of the lead. Fit new electrode to the lead. Fix electrode in burner with screw. Replace burner cap. Check the burner ignition. Replace pan supports.

12 To Remove or Change a Hotplate Burner.

Carefully lift off the outer door panel.

Remove door handle from panel by unscrewing 2 retaining nuts. Fit door handle to new panel

Fit panel to door. Reassemble in reverse order.

Remove the hotplate tray (see 2).

The burners except the right hand wok burner are mounted on support struts. For these burners, disconnect the burner feed pipes at the burner. Remove the screws at the front and rear holding the support struts. Lift the strut and burners clear. The burners are fixed to the support struts with 2 screws. Remove the appropriate burner and fit the new one. Reassemble in reverse order. Check burner operation is satisfactory.

RH Wok burner

Disconnect the burner feed pipes at the burner. Fit the new one and reassemble in reverse order. Check burner operation is satisfactory.

15.To Change the Main Oven Door Latch

Remove outer door panel (see 14). Remove screws ‘B’ holding latch assembly to inner door panel. Fit new catch and reassemble in reverse order.

Check correct door operation.

13. To Remove an Oven Door

Open the oven door. Loosen the two top hinge screws.

Support the weight of the door and remove the screw nearest the hinge pin. Swing the hinge up and away from the hinge pin on the door.

Lift the door away from the bottom hinge.

Re-assemble in reverse order.

When replacing the door ensure that the nylon hinge bush is in position between the hinge pin and the hinge bracket at the both the bottom and top.

14.To Change Main Oven Door Outer Panel

Move the cooker forward to gain access to the sides.

Open the oven door slightly and remove the front panel fixing screws from the door sides (two each side).

16.To Adjust the Main Oven Door Catch Keep

Open oven door, slacken off locknut at base of keep, and screw in or out as required until required fit is obtained. Retighten locking nut.

17.To Change Oven Door Seal

Open oven door. The seal is held in place by small hooks on the rear face. At the corner pull seal diagonally away from the door centre until that hook is released. Proceed to the next hook and release it in a similar way, and so on. Use force if the hooks are stiff, as the old seal will be discarded.

When fitting new seal, position the seal join at the bottom. Hook the new seal in one of the corner holes of the door, and proceed round the door snapping in each hook in turn.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Installation & Service Instructions U109300 Classic DeluxeGas and Electricity on InstallationBe safe Peculiar smellsContents Hotplate Burners Gas burnersCare and Cleaning Wok cradleGriddle Use Only Dry Oven GlovesUsing the grill Glide-out GrillOvens Left Hand OvenClock To activate the key lock Cooking using the timerBoth Ovens To turn off the key lockDefrost Multi-function oven functionsRapid Response Fan ovenRight Hand Oven Main Oven shelveTall oven shelves HandyrackOven light Multi-function Oven cooking guide Cooking chart Fan assisted oven functionEnsure meat and poultry is fully cooked before serving Oven Cooking chart Conventional and full Fan oven functions FishHotplate burners Cleaning your cookerSingle ring burners Wok burner Grill Control Panel and DoorsOutside of cooker Cleaning Table HotplatePart Finish Recommended Cleaning Method OvensTroubleshooting Main OvenHotplate ignition or hotplate burners faulty Power failureOven temperature getting hotter as the cooker gets older Food is cooking too slowly, too quickly, or burningIf you smell gas General Safety Instructions0800 111 Specification of this cooker should not be altered Provision of Ventilation InstallationDear Installer Location of HotplateYou will also need the following tools Checking the partsUnpacking the Cooker Positioning the CookerMoving the Cooker Fitting the splash back optional LevellingFit the Handles Conversion to LPFitting a stability bracket Gas ConnectionElectrical Connection Pressure testingPressures Customer care Oven checkFitting the plinth Thank youInjectors Tap adjustmentConversion to LP gas To convert to LP gasStick on label To Remove the Control Panel ContentsServicing To Remove HotplateTo Remove Side Panels To Remove Light SwitchTo Change the Grill Controller To Change an Ignition Switch To Remove a ThermostatTo Change Hotplate Burner Electrode To Adjust the Main Oven Door Catch KeepTo Change Hotplate Burner Injector To Remove or Change a Hotplate BurnerTo Remove Grill Element To Change Tall Oven Door Outer PanelTo Remove an Oven element Thermal Cut-Out To Remove Oven Inner BackTop Element To Adjust the Oven Door AngleTo change oven light bulb This cooker is category II2H3+ Technical DataDimensions ConnectionsCode Circuit DiagramCode Colour Page 070606

U109300 - 01 specifications

The Rangemaster U109300-01 is a remarkable appliance designed to enhance cooking experiences in modern kitchens. This versatile range cooker blends functionality with aesthetic appeal, making it a popular choice for both amateur cooks and professional chefs.

One of the standout features of the U109300-01 is its dual fuel system. This technology combines the precision of gas cooking with the even heat distribution offered by electric ovens. Home chefs can enjoy the immediate heat response of gas burners on the cooktop alongside the consistent baking results delivered by the electric oven. This dual functionality not only optimizes cooking performance but also provides users with the flexibility to cook a wide variety of dishes with precision.

Another notable characteristic of this model is its spacious oven cavity. The Rangemaster U109300-01 boasts multiple cooking zones, allowing users to prepare multiple dishes simultaneously. It is equipped with multiple shelf positions and a generous capacity, making it ideal for meal prepping, baking, or entertaining guests.

In addition to its cooking power, the U109300-01 features advanced technologies designed to improve user experience and safety. The catalytic liners in the oven are specially designed to break down grease and food particles during cooking, making cleaning effortless. Furthermore, the appliance includes a flame failure device, which automatically shuts off the gas supply if a flame is not detected, ensuring safety in the kitchen.

The design of the Rangemaster U109300-01 is equally impressive. With its sleek finish and professional styling, it adds a touch of elegance to any kitchen decor. Available in a variety of colors, this range cooker can fit seamlessly into diverse kitchen aesthetics.

To enhance user convenience, the U109300-01 comes with a programmable timer and a range of cooking modes. Whether baking, roasting, grilling, or simmering, users can select the appropriate settings to achieve the best results.

In summary, the Rangemaster U109300-01 is a feature-rich range cooker that combines modern technology with a classic design. Its dual fuel system, spacious oven, advanced cleaning technologies, and safety features make it an essential addition to any kitchen, appealing to cooks of all skill levels who value performance and style.
Top Page Image Contents