Clock Functions
1 2 3 4
7 6 5
1Time
2Cook time
3End time
4Countdown
5TIME FUNCTIONS button
6Selection button (Plus)
7Selection button (Minus)
Countdown 
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the functioning of the oven.
Cook time 
To set how long the oven is to be in use.
End time 
To set when the oven is to switch off again.
Time 
To set, change or check the time (See also section “Before Using for the First Time”).
How to use the clock functions
•After a clock function has been selected, the corresponding function flashes for about 5 seconds. During this period, the
desired times can be set or modified using the 
or button.
•When the desired time has been set, the function continues to flash for approx. 5 seconds. After that the function is then lit. The set time begins to run.
•With Countdown the oven must also be switched on in order to set the clock function.
• By pressing 
and at the same time, the time set can be reset.
Checking the time set or remaining Press the Selection button repeatedly, until the appropriate clock function flashes and the time set or remaining is displayed.
Using residual heat with the
Cook time 
and End time
clock functions
When the Cook time 
and End
time 
clock functions are used, the oven switches the heating elements off, when 90% of the time set or calculated has elapsed. The residual heat present is used to continue the cooking process until the time set has elapsed (3 to 20 mins.).
Countdown 
1.Press the "TIME FUNCTIONS" button repeatedly until Countdown 
flashes.
2.Set the desired Countdown using the 
or button.
After about 5 seconds the display shows
the time remaining. Countdown 
lights up. When 90% of the time set has elapsed, an audible signal sounds.
12