•When the desired time has been set, the function continues to flash for approx. 5 seconds. After that the function is then lit. The set time begins to run.
•With Countdown the oven must also be switched on in order to set the clock function.
• By pressing 
and at the same time, the time set can be reset.
Checking the time set or remaining Press the Selection button repeatedly, until the appropriate clock function flashes and the time set or remaining is displayed.
Using residual heat with the
Cook time 
and End time
clock functions
When the Cook time 
and End
time 
clock functions are used, the oven switches the heating elements off, when 90% of the time set or calculated has elapsed. The residual heat present is used to continue the cooking process until the time set has elapsed (3 to 20 mins.).
Countdown 
1.Press the " TIME FUNCTIONS " button repeatedly until Countdown 
flashes.
2.Set the desired Countdown using the 
or button.
After about 5 seconds the display shows
the time remaining. Countdown 
lights up. When 90% of the time set has elapsed, an audible signal sounds.
When the time has elapsed, an audible signal sounds for 1 minute. “00.00” and
Countdown 
flash.
To stop the flashing and the audible signal:
Press any button.
Cook time 
1.Select the oven function and temperature.
2.Press the " TIME FUNCTIONS " button
repeatedly until Cook time 
flashes.
3.Set the desired cooking time using the
or |
| button (max. 09.59 hours). |
|
Cook time 
lights up.
When the time has elapsed, “00.00” and
Cook time 
flash.
An audible signal sounds for 2 minutes. The oven switches itself off.
To stop the flashing and the audible signal: Press any button.
End time 
1.Select the oven function and temperature.
2.Press the " TIME FUNCTIONS " button
repeatedly until End time 
flashes.
3. Using the | or |
| button set the desired |
| |||
|
| ||
End time 
lights up and the cook time calculated is displayed.
When the time has elapsed, “00.00” and
End time 
flash.
An audible signal sounds for 2 minutes. The oven switches itself off.
To stop the flashing and the audible signal: Press any button.
13