hussman ESSS-0303 Wiring Color Code, Electrical Circuit Identification, Ballast Location

Page 8

IGSS-ESS/ESSS-0303

Electrical

WIRING COLOR CODE

GREEN

GROUND

PURPLE

ANTI-SWEAT

ORANGE

LIGHTS

YELLOW

RECEPTACLE

RED / BLACK

T-STAT /SOLENOID230V

BLACK / WHITE

T-STAT / SOLENOID 115V

BROWN

FAN MOTORS

 

 

BEFORE SERVICING

ALWAYS DISCONNECT ELECTRICAL POWER AT THE MAIN DISCONNECT WHEN SERVICING OR REPLACING ANY ELECTRICAL COMPONENT.

This includes (but not limited to) Fans, Heat-

ers, Thermostats, and Lights.

CASE MUST BE GROUNDED

NOTE: Refer to label affixed to case to determine the actual configuration as checked in the “TYPE INSTALLED” boxes.

ELECTRICAL CIRCUIT IDENTIFICATION

Standard lighting for all models will be full length fluores- cent lamps located within the case at the top.

The switch controlling the lights, the plug provided for digital scale, and the thermometer are located at the rear of the case mullion.

The receptacle that is provided on the exterior back of these models is intended for computerized scales with a five amp maximum load, not for large motors or other high wattage appliances. It should be wired to a dedicated circuit.

ELECTRICAL SERVICE RECEPTACLES (When Applicable)

The receptacles located on the exterior of the merchan- diser are intended for scales and lighted displays.They are not intended nor suitable for large motors or other external appliances.

FIELD WIRING & SERIAL PLATE AMPERAGE

Field Wiring must be sized for component amperes printed on the serial plate.Actual ampere draw may be less than specified. Field wiring from the refrigeration control panel to the merchandisers is required for re- frigeration thermostats. Most component amperes are listed in the “Case Specs” section, but always check the serial plate.

BALLAST LOCATION

Ballasts are located within the access panel that runs the length of the rear of the case. See T-stat location for placement, as they are in the same location.1

ODY

 

 

S

 

B

OPTIONAL

S

 

L

OPTIONAL

OPTIONAL

8

Image 8
Contents Esss / ESS This Booklet Contains Information on Shipping DamageApparent Loss or Damage Concealed Loss or DamageCut & Plan Views EsssSetting and Joining Leveling and PlacementUncrating the Stand Exterior LoadingCorner Wedges ESS RefrigeratedDRY Common END Between Unlike Cases and HOT CasesWaste Outlet and P-TRAP Installing Condensate DrainPlumbing Control Settings Access to TX Valves & Drain LinesExpansion Valve Adjustment Refrigerant TypeWiring Color Code Field Wiring & Serial Plate AmperageElectrical Electrical Circuit IdentificationJoint Trim Esss OnlyUser Information StockingCase Cleaning Cleaning Glass & MirrorsCleaning Precautions When Cleaning Plexiglass & Acrylic Care CleaningParts List Antistatic CoatingsPlexiglass Repair InstructionsReplacement Tips & TroubleshootingFor Prompt Service Replacing Fluorescent LampsSpecifications ModelElectrical Schematics 2CaselayoutwithT8Lights0100-04-125 PigtailcaseSingle 0101-04-125 Solenoid Gfci ASC 12CasewithT8Lights Appendix A. Temperature Guidlines Type of Refrigerator Typical Entering Air TemperatureAppendices Appendix B. Application RecommendationsAre the refrigerant controls incorrectly adjusted? Appendix D. Recommendations to userIGSS-ESS/ESSS-0303 Limited Warranty Model Serial Number

IGSS-ESS, ESSS-0303 specifications

The Hussman ESSS-0303 and IGSS-ESS are revolutionary products in the world of commercial refrigeration, known for their ability to deliver energy-efficient performance while ensuring optimal food preservation. These systems feature cutting-edge technology that caters to the needs of supermarkets, convenience stores, and other retail environments where refrigeration is crucial.

One of the primary features of the Hussman ESSS-0303 is its advanced energy management capabilities. The system is equipped with intelligent controls that analyze energy consumption patterns, optimizing performance in real time. This not only helps to reduce operational costs but also contributes to sustainability efforts by minimizing energy waste.

Another significant aspect of the ESSS-0303 is its ability to maintain precise temperature control. This is achieved through a combination of high-quality insulation and advanced refrigeration technology, which ensures that products remain fresh for longer periods. The unit offers temperature ranges specifically designed for various applications, whether it be for dairy products, frozen foods, or fresh produce.

The Hussman IGSS-ESS, on the other hand, is designed to integrate seamlessly with existing refrigeration setups, allowing for a smooth transition to newer technologies. Its modular design allows businesses to easily expand their refrigeration capabilities without the need for extensive renovations. In addition, the IGSS-ESS features remote monitoring capabilities, which enables store managers to track performance and diagnose potential issues from a distance, ensuring minimal downtime.

These systems are also built with user-friendliness in mind. The intuitive control interface allows for easy programming and adjustments, empowering staff to efficiently manage the refrigeration environment. Furthermore, Hussman has made durability a priority; both the ESSS-0303 and IGSS-ESS are constructed from robust materials, ensuring longevity even in high-demand retail settings.

In summary, the Hussman ESSS-0303 and IGSS-ESS offer enhanced energy efficiency, precise temperature control, integration capabilities, remote monitoring, and user-friendly interfaces. These characteristics make them ideal choices for retailers seeking to optimize their refrigeration solutions while maintaining product quality and reducing energy costs. As businesses continue to prioritize sustainability and efficiency, the Hussman range stands out as a reliable partner in commercial refrigeration technology.