Master Bilt TAF-74 ERC2, TAF-48 ERC2, TAF-27 ERC2 manual Con

Minimum	Con	Minimum time that	Range: from 0 to 15 min	2 min.
Compressor		the compressor
On Time		remain turned on
Alarm Delay	ALrd	Time delay before	Range: from 0 to 59 min	30 – for LT
		the alarm goes off		45 – for MT
		after the
		temperature fall
		off the two alarm
		set points
Compressor	CPrn	Time the		12 – for MT
Run Time		compressor runs
		between defrosts
Number of	nodF	Number of defrosts	from 0 to 8 (0 means 1 defrost	N/A – for LT
Defrosts		per day	every 48 hours)	0 – for MT
Defrost Start	dEF1-8	Start time of each		N/A
Time		defrost
Defrost	dEFd	Defrost duration	Range: from 0 min to 4 hours	35 – for LT
Duration		time (back-up for		0 – for MT
		defrost
		termination
		temperature)
Fan Delay	FAnd	Delay time for the	Range: from 0 to 15 min	2 – for LT
		fan after defrost		0 – for MT
		(back-up for fan
		cut-in
		temperature)
Pump Down	Pudn	Pump down duration	Range: from 0 to 59 min	0 min.
Drip Time	driP	Drip time duration	Range: from 0 to 59 min	2 – for LT
				0 – for MT
Setpoint	°	Cut-in temperature	°	°
	diF	differential	Range: from 1 to 25	10 F–for LT
Differential				7oF – for MT
		Note: cut-in is cut-
		out plus differential
Temperature	tdEF	Temperature that	Range: from – 40 to 40°F or – 40 to	N/A
Initiated		will initiate a	4°C
Defrost		defrost cycle
Defrost	dEF°	Temperature in the	Range: from 0 to 75°F or –18 to	50° F
Termination		evaporator that	25°C
Temperature		will terminate the
		defrost cycle
Fan Cut-In	FAn°	Temperature in the	Range: from – 40 to 60°F or – 40 to	30° F–for LT
Temperature		evaporator that	23°C	60oF–for MT
		will turn the fan
		on after defrost
Low	ALLo	Low temperature	°	°
		setpoint that will	Range: from – 40 to 83 F or – 40 to	-40F–for LT
Temperature			23°C	32oF–for MT
Alarm		make the alarm go
		off and the error
		message appear on
		the display
		11