Low Temperature Freezers TAF Models | Master Bilt TAF-74 ERC2

CONDENSATE PAN INSTALLATION FOR TOP MOUNT CABINETS ONLY

1.Before moving cabinet into place, remove the condensate pan from the top unit compartment.

2.Using the two screws supplied with the pan, attach the pan to the back of the cabinet at the two holes near the bottom of the plastic drain line. Be sure pan is NOT located directly under cabinet. When the pan is attached, feed drain line into the open hole in screen and clamp the heater conduit to the back of the cabinet. Due to this condensate pan, this case must be a minimum of 6” from the wall.

3.If cabinet must be located next to wall on legs, the pan can be located under the cabinet. When this is done, steam will accumulate on the bottom

of the cabinet if there is not adequate ventilation, and rusting of the bottom of the cabinet will occur.

Low Temperature Freezers – TAF Models

The TAF - 27 models are cord connected and operate on a 15 amp, 115/60/1 circuit. The TAF – 48 and TAF- 74 models have two junction boxes mounted on top of the cabinet, at the right rear, for permanent connection to power. One junction box is labeled 115v. (black, white and green lead) ; the other is labeled 230v. (black, red and green lead). These boxes should be connected to their respective power source. Check inside the cabinet for the power requirement for each cabinet. The label is located in the upper left hand corner.

ERC 2 – ELECTRONIC REFRIGERATION CONTROL

Programming

To access the pushbuttons on the ERC2, flip up the front cover using the tabs on the side of the cover as shown.

The ERC 2 control initially powers up displaying 12:00 AM otherwise it will show the last configured selection (time or temperature). If a power outage occurs during normal operation, the control will maintain the correct time-of-day using a capacitor (batteries are not required). The time will be maintained for up to 100 hours when the capacitor is fully charged.

TAF-74 ERC2, TAF-27 ERC2, TAF-48 ERC2 specifications

The Master Bilt TAF series, which includes models TAF-48 ERC2, TAF-27 ERC2, and TAF-74 ERC2, represents a substantial advancement in refrigeration technology, specifically designed for food service and commercial kitchens. Each model in this series has been engineered to meet diverse cooling requirements while ensuring energy efficiency and reliability.

The TAF-48 ERC2 is a robust unit with a 48-inch width, making it an ideal choice for establishments that require ample refrigeration space without sacrificing energy efficiency. This model features a digital temperature control system, allowing for precise monitoring and adjustments of internal temperatures. Its front-breathing design enables it to be used in confined spaces, optimizing workflow in busy kitchens. The TAF-48 ERC2 is equipped with LED interior lighting, enhancing visibility for quick access to stored items, and comes with adjustable shelves to accommodate various sizes of products.

In contrast, the TAF-27 ERC2 offers a more compact solution for locations with limited space. With a 27-inch width, it is perfect for smaller kitchens or front-of-house applications. Despite its size, the TAF-27 ERC2 is built with the same quality components as the larger models. This unit also includes a digital control system for easy temperature management and energy-efficiency features that contribute to lower operational costs.

The TAF-74 ERC2 stands out with its impressive 74-inch width, tailored for high-volume operations. It features a powerful compressor and advanced refrigeration technology that ensures fast and consistent cooling, critical for busy environments. This model is particularly suited for establishments like buffets or catering services, where large quantities of food need to be quickly accessed and maintained at safe temperatures.

All models in the Master Bilt TAF series incorporate environmentally friendly refrigerants, reflecting a commitment to sustainability. They are designed for easy cleaning with rounded corners and removable shelves, making maintenance straightforward. Each model boasts a durable construction, ensuring longevity even in the most demanding kitchen settings.

In summary, Master Bilt's TAF-48 ERC2, TAF-27 ERC2, and TAF-74 ERC2 deliver exceptional reliability, energy efficiency, and user-friendly features, making them ideal choices for a variety of commercial refrigeration needs. Each unit is crafted to provide optimal performance while prioritizing ease of use and sustainable practices.