3.Grasp outer edge of stainless frame and firmly press inside edge of glass in while pulling stainless frame in opposite direction.
Pull Frame
Away
Push Glass
In
4.Unhinge frame from door.
Assemble Stainless Frame
1.Prop frame against solid surface, handle side down and away
2.Insert door, logo forward, into frame at a 30° angle. For a right hand hinge the logo should be to your right. For a left hand hinge the logo should be to your left.
Door Orientation Right Hand Hinge
Logo |
Door Orientation Left Hand Hinge
Logo |
3.Swing door into frame.
4.Install screws removed in “Remove Stainless Frame” step 1 to top of door, opposite handle.
5.Install pivot plat to bottom of door, opposite of handle, using hardware removed in “Remove Stainless Frame” step 2. Arrange pivot plate so the flat edge is against the edge of the door.
Door Edge
Pivot Plate
Flat Edge
Orient Hinge
1. Remove existing top hinge (three screws) (2).
1
2
Reinstall hinge to bottom opposite.
1.Install the hinge just removed from the top to the BOTTOM opposite side of the cabinet (three screws) (2).
2.Remove the two door closer inserts (4) from the preexisting bottom hinge.
4
4
3.Install door closer inserts as shown on the new bottom hinge
(4).
10 |