U-Line U-2175RSOD-01, U-2175RCS-01 Product Registration Models Covered, Tools / Material Required

Page 4

2 Inspect & Plan

Product Registration

You have received a carton containing your U-Line Refrigerator, Refrigerator Freezer, Beverage Center or Wine Captain® unit with a package inside containing a Use and Care Guide, a Product Registration Card, and a water line kit. Please complete and mail the Product Registration Card or register online at www.U-LineService.com. Once your unit is installed, keep the Use and Care Guide and this Installation Guide in a safe place for future reference.

Models Covered

This installation guide covers the following models.

Tools / Material Required

Screwdrivers — slotted and Phillips head (Models ending in OL Only)

3/4" overlay frame material

Cutting Tools

Drill & Drill Bits

(Optional Door Panel on 2115R(F) or 2175R(F) Black or White Models)

1/4" thick door panel material

Cutting Tools

(Optional WC & BEV Wood Trim Finishing)

Minwax® Water-Based Wood Stain

Minwax® Polycrylic® Protective Finish

Foam Applicator and / or Synthetic Bristle Brush

220 grit Sandpaper

280 grit Sandpaper

(Optional Overlay kits for Non-OL models)

U-2115RB-00

U-2115RS-00

U-2115RS-01

U-2115RS-02 U-2115RSOD-00 U-2115RSOD-01 U-2115RW-00 U-2115WCOL-00 U-2115WCS-00 U-2115WCS-01 U-2175BEVCOL-00 U-2175BEVCOL-02 U-2175BEVCOL-60 U-2175BEVCS-00 U-2175BEVCS-01 U-2175BEVCS-02 U-2175BEVCS-13 U-2175RCB-00 U-2175RCB-02 U-2175RCS-22 U-2175RFS-00 U-2175RCGOL-00

U-2175RCGS-00 U-2175RCGS-01 U-2175RCS-00 U-2175RCS-01 U-2175RCW-00 U-2175RFB-00 U-2175RFS-01 U-2175RFW-00 U-2175RSOD-00 U-2175RSOD-01 U-2175WCCOL-00 U-2275WCCOL-02 U-2275WCCOL-60 U-2175WCCS-00 U-2175WCCS-01 U-2175WCCS-02 U-2175WCCS-13 U-2175WCCS-22 U-2275ZWCOL-00 U-2275ZWCS-00 U-2275ZWCS-01

Model

Panel Kit (Black)

Panel Kit (White)

 

 

 

 

 

 

2115R

U-OL2115B

U-OL2115W

2175R

U-OL2175B

U-OL2175W

2175RF

U-OL2175B

U-OL2175W

 

 

 

Exterior Cleaning

Black and White Models:

Black and White surfaces may be cleaned with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft, clean towel to prevent water spotting.

Stainless Models:

Stainless door panels, handles and frames can discolor when exposed to chlorine gas, pool chemicals, salt water or cleaners with bleach.

Keep your Stainless unit looking new by cleaning with a good quality all-in-one stainless steel cleaner/polish on a monthly basis. For best results use Claire Stainless Steel Polish and Cleaner, which can be purchased from U-Line Corporation (Part numbers 173348).

Do not clean with steel wool or abrasive pads.

Do not use cleaners that are not specifically intended for stainless steel on stainless surfaces (this includes glass, tile and counter cleaners).

If any surface discolors or rust appears, clean it quickly with Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive cloth. Always clean in the direction of the grain. Always finish this process with Claire Stainless Steel Polish and Cleaner or comparable product to prevent further problems.

!CAUTION

Rust that is allowed to linger can penetrate into the surface of the stainless steel and complete removal of the rust may not be possible.

2

u-line.com

Image 4
Contents Installation Guide Table of Contents General Precautions Safety Alert DefinitionsSafety Precautions Exterior Cleaning Product Registration Models CoveredTools / Material Required Inspect & PlanElectrical Specifications Cut-Out DimensionsPrepare Site SeriesProduct Dimensions 2115R Series 2115WC / 2115WCOL Series 21175RC/RCG/RF Series2175BEVC Series 2175WCC SeriesDoor Swing Dimensions Side-By-Side InstallationPower Supply Other Site RequirementsDoor Alignment and Adjustment To align and adjust the doorDoor Reversability Doors Self-ClosingReinstall hinge to bottom opposite Reversing Black or White DoorsRemove Door Remove hole plugsReversing Stainless Steel Glass Doors Pull Frame Away Push Glass Remove existing bottom hinge Wood Trim Finishing Staining and final finish applicationFinal finish-only application To insert a rack in the cabinetDoor Panel Installation Panel DimensionsDoor Panel Installation Custom 1/4 Thick Door Panel InsertInstallation Grille OverlayWood Grille Overlay PreparationGrille Overlay Dimensions 24 Inch Models Grille Overlay Dimensions 15 Inch Models Overlay Frame Frame Preparation2115WCOL 2175WCCOL & 2175BEVCOL Models Only Thickness of the overlay panel must be 3/4Prepare the New Overlay Panel Attaching the Overlay PanelAssembling Door to Cabinet Door closersInstallation InstallationInstallation Troubleshooting Leveling InformationDESIGNED, Engineered and Assembled in WISCONSIN, USA
Related manuals
Manual 28 pages 41.87 Kb