U-Line CLR2060 manual Inspect and Plan, General Precautions, Tools/Materials Required, Inspection

Page 3

CLR2060 — Clear Ice Maker

 

General Precautions

Use this appliance for its intended purpose only and follow these general precautions along with those listed throughout this guide:

WARNING

SHOCK HAZARD — Electrical Grounding Required.

Keep the unit unplugged throughout installation except during testing.

Never remove the round grounding prong from the plug and never use a two-prong grounding adapter.

Never use an extension cord to connect power to the unit.

Always keep your working area dry.

CAUTION

Use care when moving and handling the unit. Use gloves to prevent personal injury from sharp edges.

Do not lift the unit by the door or door handle.

Do not install the unit behind closed doors or in any way that would obstruct airflow to the front grille, which may cause the unit to malfunction.

2 Inspect and Plan

You have received a carton containing your CLR2060 Clear Ice Maker with a package inside containing a User Manual, a Product Registration Card and water connection parts.

Complete and mail the Product Registration Card or register online at www.U-LineService.com. Once your unit is installed, keep the User Manual and this Installation Guide in a safe place for future reference.

Your unit is Black, White or Stainless Steel. Black and White units have a reversible door with a slightly contoured handle across the top. They come with a flush mounted door panel that, when removed, will accept a custom 1/4-inch thick door panel or a 3/4-inch thick full overlay door panel. Stainless Steel units are covered with a protective coating and have been ordered left- or right- hand hinged. The Stainless doors are not reversible and do not accept custom panels. CLR2060 Clear Ice Makers may be ordered with a factory-installed drain pump. Please carefully follow the directions that apply to your unit and your intended design.

Tools/Materials Required

7/64" Allen wrench

Screwdrivers — slotted and Phillips head

1/4-inch OD copper tubing and shut-off valve for water supply line

5/8-inch ID drain line

P60 Drain Pump (if required and not already factory installed, see Page 12)

1/4-inch thick door panel material and cutting tools (Black or White units)

Full Overlay Door Panel Kit (part number U-OL2015B — Black or part number U-OL2015W — White), 3/4-inch door panel overlay, cutting tools, drill and bits (Black or White units)

Inspection

Unwrap and inspect the unit on a flat, level surface capable of supporting its entire weight.

02/2005

3

www.U-LineService.com

Image 3
Contents CLR2060 Clear Ice Maker Follow Safety Precautions ContentsInspection General PrecautionsInspect and Plan Tools/Materials RequiredPrepare Site Product DimensionsCut-Out Dimensions Door Swing/Clearances InformationReversing the Door Other Site Requirements Side-By-Side Installation InstructionsDoor Panel Preparation Prepare and Install Door PanelDoor Panel Installation Custom 1/4 Door Panel InsertFull Overlay Door Panel Attaching the Full Overlay Panel Installation InstructionsAssembling the Door Adjusting Door Alignment Adjust DoorChecking Door Alignment Drain Connection Prepare PlumbingGravity Drain Factory-Installed Drain Pump Locally-Installed Drain Pump Water Supply Connection Go on to 7 Prepare Power SupplyElectrical Specifications Prepare Power Supply Level the UnitLeveling Information Installation of the CLR2060 Installation TipInstall the Unit Installation Troubleshooting Initial Start-UpStart-Up for the First Time About Settings Start-Up TroubleshootingWho to Call Service Information