Smeg
STA6248, STA6249 User instructions, Cancelling The Current Program, Changing The Program
Troubleshooting
Electrical characteristics
Install
Fault
Connecting To The Water Supply
Adjusting The Upper Basket
Cleaning and maintenance
Fuse replacement
Safety
Cancelling The Current Program
Page 14
Page 13
Page 15
Image 14
Page 13
Page 15
Contents
GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS
Contents
USES OTHER THAN THOSE DESCRIBED ABOVE
Safety instructions
1. Safety and operating instructions
NEVER BE REMOVED
THIS DISHWASHER MUST BE USED BY ADULTS
AQUASTOP MODELS
APPLIANCE
2.1 Water supply connection
Installation instructions
2. Installation and hook-up
CONNECTING TO THE WATER SUPPLY
DRAIN CONNECTION
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD
2.2 Electrical connection and precautions
NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD
Fuse replacement
FOR GREAT BRITAIN ONLY
SELECTED PROGRAM INDICATOR LIGHTS
User instructions
3. Description of the controls
3.1 Upper panel
DELAYED START LIGHTS on some models only
SETTING THE WASHING PROGRAM AND SWITCHING ON
DELAYED START BUTTON on some models only
Only run the soak program with half loads
The correct amount of detergent has been added to the dispenser
3.2 Washing programs
Before starting a washing program make sure that
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
CANCELLING THE CURRENT PROGRAM
CHANGING THE PROGRAM
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT
END OF CYCLE
REMOVING THE DISHES
4. Operating instructions
4.1 Using the water softening system
ADJUSTING THE WATER SOFTENING SYSTEM
4.2 Using the rinse aid and detergent dispensers
WATER HARDNESS TABLE
ADJUSTING THE RINSE AID DISPENSER SETTING
ADDING THE RINSE AID
ADDING THE DETERGENT
During the washing cycle, the dispenser will be opened automatically
Correct loading of the dishes helps ensure optimal washing results
4.3 General warnings and recommendations
3/1 Products
Dishes and objects in copper, tin, zinc or brass these tend to stain
LOADING THE LOWER BASKET
4.4 Using the baskets
LOWER BASKET
CUTLERY BASKET
UPPER BASKET
LOADING THE UPPER BASKET
ADJUSTING THE UPPER BASKET
Version C with adjustment in three positions on both sides
CLEANING THE SPRAY ARMS
5. Cleaning and maintenance
CLEANING THE WATER INTAKE FILTER
5.1 General warnings and recommendations
PROLONGED DISUSE
CLEANING THE FILTER UNIT
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE
Fill the rinse aid dispenser Shut off the water supply tap
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE
TROUBLESHOOTING MINOR PROBLEMS
If the dishes are not being cleaned properly, check that
Reconnect the water intake hose and open the tap again
If there are visible traces of rust inside the tank
If the dishes fail to dry or remain dull, check that
If the dishes show signs of streaking, staining, etc., check that
Safety level
6. Troubleshooting
FAULT
E1 E2 E3 E4 E5 E6
Alternate washing system malfunction
E7 E8 E9
Turbine flow-regulator malfunction
Water intake system malfunction
Width
TECHNICAL DATA
Electrical characteristics
Height depending on models Capacity Water supply pressure
Related pages
All Cancel page
What is the warranty for
3M Food Saver part number 78-8070-1522-3
?
Top
Page
Image
Contents