Smeg CIR574X Cleaning And Maintenance, Cleaning of the hob components, Food stains or residues

Page 18
8. CLEANING AND MAINTENANCE

Instructions for the user

8. CLEANING AND MAINTENANCE

Before any intervention, disconnect the power supply of the device.

8.1 Cleaning

Clean the top regularly every time you use it, obviously after it has cooled.

8.1.1 Regular daily cleaning of the hob

In order to clean and preserve the surface, always use specific products only, which do not contain abrasive substances or chlorine-based acid substances.

How to use: pour the product on a damp cloth and wipe the surface, rinse thoroughly and dry with a soft cloth or deerskin.

8.1.2 Food stains or residues

Do not use metallic sponges or sharp scrapers: they will damage the surface.

Use normal non-abrasive products and remove spots or residuals with non-scratch sponges or, if need be, with wood or plastic utensils.

Rinse thoroughly and dry with a soft cloth or deerskin.

8.2 Cleaning of the hob components

Grids, caps, flame cap crowns and burners can be removed for ease of cleaning. Wash them in warm water using a non-abrasive detergent, taking care to remove all tough spots. Before remounting, allow the components to fully dry out.

8.2.1 Ignition plugs and safety devices

For good functioning of the lighting ignition plugs and the safety devices, keep them very clean.

Check frequently and clean with a damp cloth when necessary.

20

Image 18
Contents Contents NEVER UNPLUG BY PULLING ON THE CABLE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER ATTEMPT TO REPAIR THE APPLIANCETHE PLATE ON THE CASING MUST NOT BE REMOVED Instructions for the installer 2. POSITIONING OF THE HOB2.1 Attachment to support structure 2.2Clearance above and around domestic appliances Extract from AS560130 CM 70 CM HOB HOB REQUIREMENTS NOTES2.3 Room ventilation 2.4 Discharge of combustion products3. GAS CONNECTION 4. ELECTRICAL CONNECTION 5. ADAPTATION TO DIFFERENT TYPES OF GAS 5.1 Removing the hob5.2 Adjustment for LPG Burner5.3 Adjustment for natural gas 6.1 Adjustment of minimum for natural gas6. FINAL OPERATIONS 6.2 Arrangement of burners on the hob 6.3 Lubrication of gas tapsBurners 7. USING THE HOB Instructions for the user7.1 Ignition of the burners Burner 7.2Practical advice for using the burners7.3Diameter of containers Ø min. and max. in cm7.4.2 Using the electric elements 7.4 Electric elements7.4.1 Turning on electric elements To use correctly remember to 8.2 Cleaning of the hob components 8. CLEANING AND MAINTENANCE8.1 Cleaning 8.1.1 Regular daily cleaning of the hob8.3 Preventive maintenance CAUSE 9. PROBLEMS AND CAUSESPROBLEM WHAT TO DO