Smeg
CIR574X
manual
7.2Practical advice for using the burners, 7.3Diameter of containers, Burner
Install
Maintenance
Problems And Causes
Adjustment for LPG
Cleaning And Maintenance
Using The Hob
Page 15
Page 14
Page 16
Image 15
Page 14
Page 16
Contents
Contents
NEVER ATTEMPT TO REPAIR THE APPLIANCE
Introduction
1. INSTRUCTIONS FOR SAFE AND PROPER USE
NEVER UNPLUG BY PULLING ON THE CABLE
THE PLATE ON THE CASING MUST NOT BE REMOVED
Instructions for the installer
2. POSITIONING OF THE HOB
2.1 Attachment to support structure
2.2Clearance above and around domestic appliances
Extract from AS5601
30 CM 70 CM HOB HOB
NOTES
REQUIREMENTS
2.4 Discharge of combustion products
2.3 Room ventilation
3. GAS CONNECTION
4. ELECTRICAL CONNECTION
5.1 Removing the hob
5. ADAPTATION TO DIFFERENT TYPES OF GAS
Burner
5.2 Adjustment for LPG
5.3 Adjustment for natural gas
6.1 Adjustment of minimum for natural gas
6. FINAL OPERATIONS
6.2 Arrangement of burners on the hob
6.3 Lubrication of gas taps
Burners
7. USING THE HOB
Instructions for the user
7.1 Ignition of the burners
Ø min. and max. in cm
7.2Practical advice for using the burners
7.3Diameter of containers
Burner
7.4.2 Using the electric elements
7.4 Electric elements
7.4.1 Turning on electric elements
To use correctly remember to
8.1.1 Regular daily cleaning of the hob
8. CLEANING AND MAINTENANCE
8.1 Cleaning
8.2 Cleaning of the hob components
8.3 Preventive maintenance
WHAT TO DO
9. PROBLEMS AND CAUSES
PROBLEM
CAUSE
Related pages
All Advice page
Reheating Advice for Sharp R-86STM
General advice for Jonsered 2150
Advice and Workarounds for Hand Held Products 7900
Utensil Use Advice for Sharp R-520E
Please contact Miele’s application specialist for advice for Miele G 7883
Practical Advice and Cooking Table for Fagor America 5HA-200 RX
Advice on working with materials / Tools / Speed ranges for Kompernass PFBS 9.6V
Advice regarding the first wash cycle for Hotpoint FDEF 33121
Cooking advice for Indesit K 30 E/G
Advice for Steam for Sharp AX-1100
What to do if my
Dayton heater troubleshooting
shows a spark but no ignition?
Top
Page
Image
Contents