Smeg LVS1449B instruction manual User instructions, Using the rinse aid and detergent dispensers

Page 20

User instructions

WATER HARDNESS TABLE

		WATER HARDNESS			SETTING

	German Degrees (°dH)		French Degrees (°dF)


0		- 4	0	- 7	Setting N. 1 NO SALT

5 - 15			8 - 25		Setting N. 1

	16	- 23	26	- 40	Setting N. 2

	24	- 31	41	- 60	Setting N. 3

	32	- 47	61	- 80	Setting N. 4

48		- 58	81 - 100		Setting N. 5

Contact your local water board for information on the hardness of your water supply.

4.2 Using the rinse aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right.

With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required.

Image 20

Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents Safety instructions 1. Safety and operating instructionsTHIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS For free-standing models only Installation instructions2. Installation and hook-up DRAIN CONNECTION CONNECTING TO THE WATER SUPPLY2.1 Water supply connection 2.2 Electrical connection and precautions IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORDFuse replacement FOR GREAT BRITAIN ONLYUser instructions 3. Description of the controls6 START/STOP BUTTON 7 POWER ON LIGHT 3.1 Front panelOnly run the soak program with half loads 3.3 Washing programs Before starting a washing program make sure thatThe correct amount of detergent has been added to the dispenser LIGHTINGSELECTION PROGRAM START PROGRAMEND PROGRAM INTERRUPTING A PROGRAMTO CHANGE A PROGRAM STOPPING A PROGRAMParticularly, on the display it will have the following indications HALF LOAD WASH FUNCTION on some models only REMOVING THE DISHES TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTTO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT 4. Operating instructions 4.1 Using the water softening systemUser instructions 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLEADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AIDADDING THE DETERGENT During the washing cycle, the dispenser will be opened automaticallyUser instructions MAKE SURE that the items being washed are dishwasher-safe 4.3 General warnings and recommendationsCorrect loading of the dishes helps ensure optimal washing results Items which are not dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain4.4 Using the baskets LOWER BASKETLOADING THE LOWER BASKET Loading examples ½ LOADCUTLERY BASKET UPPER BASKET LOADING THE UPPER BASKETADJUSTING THE UPPER BASKET Version BUser instructions 5. Cleaning and maintenance CLEANING THE WATER INTAKE FILTERCLEANING THE SPRAY ARMS 5.1 General warnings and recommendationsCLEANING THE FILTER UNIT GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCEPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tapTROUBLESHOOTING MINOR PROBLEMS If the dishes are not being cleaned properly, check thatBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap againIf there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check thatIf the dishes show signs of streaking, staining, etc., check that 6. Troubleshooting TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEMFAULT E1 E2 E3 E4 E5 E6 E7 E8 E9TECHNICAL DATA Electrical characteristicsWidth Capacitymollelaterali primadell’installazione des ressortslateraux avant l’installationMontare la porta e regolarelatensione delle einstellen