Olivetti 120D Using the Scanner Mode, Using the Button Manager, Setting up the Button Manager

USING THE SCANNER MODE

The scanner driver for this unit includes an STI (Still image) driver and WIA (Windows Image Acquisition) driver. You can install software that supports the STI driver and WIA driver to enable scanning using the operation panel of the unit.

For problems with the scanner function, see the online manual or the help file for the driver.

Using the Button Manager

Setting up the Button Manager

The Button Manager accessory software supports the STI driver and WIA driver. Setup that is required in Windows to use the Button Manager is explained in the following.

Windows XP

1

2

3

4

Click the "start" button, select "Control Panel" and click "Printers and Other Hardware", and then click "Scanners and Cameras" in the start menu. Right click the "Olivetti d-Copia 150D" icon and click "Properties" in the menu that appears.

In the "Properties" screen, click the

Olivetti d-Copia 150D Properties

"Events" tab.

Button Manager (Olivetti Personal

Click the "Select an event" button and
	Olivetti d-Copia 150D Properties
select "ScanMenu SC1" from the pull-down
menu. Select "Button Manager (OLIVETTI
Personal MFP Series)" in "Start this
		Button Manager (Olivetti Personal
program" and click "Apply".

Repeat step 3 to set "ScanMenu SC2" through "ScanMenu SC6".

Click the "Select an Event" button and select "ScanMenuSC2" from the pull- down menu. Select "Button Manager (Olivetti Personal MFP Series)" in "Start this program" and click "Apply". Do the same for each ScanMenu through "ScanMenuSC6". When the settings have been completed, click the "Close" button to close the screen. When the settings have been completed in Windows, start the Button Manager. Adjust detailed settings and then scan an image from the unit.For the procedures for starting Button Manager and adjusting settings, see "Scan Parameter Settings Dialog Box" (p.36).

34