4 Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( 
) indicator will go out and the start (
) indicator will light up.
Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( 
) indicator will go out and the start (
) indicator will light up.
D: Misfeed in the SPF
An original misfeed may occur at one of three locations: if the misfed original is seen from the original feeder tray, (A) in the original feeder tray; if the misfed original is not seen from the original feeder tray, (B) in the exit area or (C) under the feeding roller. Remove the misfed original following the instructions for each location.
(A)Open the feeding roller cover and pull the original gently to the left and out from the original feeder tray. Close the feeding roller cover. Open and close
the original cover to clear the SPF misfeed ( 
) indicator. If the misfed original cannot be easily removed, proceed to (C).
Feeding roller cover
8
67
